Question about 2002 Ford ZX2

1 Answer

My car rpm need drops down below one and them come back up one minute later ruff idle it feels as thoe it going to stall on me i need to find an engine digram so i can fix the problem i am no machanic but please help me.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

It could be many of things, i dont have a digram, however check for a vacuum leak, i had a similar problem on the PCV valve, there is a tube that runs from it, on the front of the motor next to the header and goes to the back under the center of the intake manifold. Its hard to get to if its messed up. Have you done a tune up, plugs, wires, filter(air and fuel)? if the fuel filter is badly clogged it may not be getting enough fuel ? Hope I could help.

Posted on Jun 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a new 2015 Ford 150 Lariat. I have noticed that when it idles for a while, at a traffic light or in stalled traffic, it feels like the engine stops.


You need the computer controlled idle speed control system run through an active test procedure, and yes unfortunately this requires a trip to the dealer in most cases as very few shops have the right scanner, but check around..

Dec 18, 2016 | Ford F-150 Cars & Trucks

1 Answer

Why it stalls at stops and low speeds


accord stalling on every stop. (1/2) - EricTheCarGuy ...

www.ericthecarguy.com/.../8.../46884-accord-stalling-on-every-stop
The car runs good but stalls every time i come to a stop. ... a stop then it diesagain.only on the stops does the idle drop very low to the point of stalling.what ... only when I start slowing down and come to a complete stop RPM's go down and the cardies. ... The popular Honda Civic and Accord vehicles share many powertrain ...

1998 Honda Accord loses rpm/ stalls coming to a stop ...

honda-tech.com/honda-accord.../1998-honda-accord-loses-rpm-stalls-co...
Jan 10, 2013 - I just bought a 1998 4 cyl 2.3 L Honda Accord two days ago. ... 1998Honda Accord loses rpm/ stalls coming to a stop. .... Is clockwise high idle or low idle? all in all i probable rotated counterclockwide 1.5 or 2 turns. maybe this ...

1999 Accord, 130k+, stalls when slowing to a stop - Honda Accord ...

www.hondaaccordforum.com > ... > General > General Tech Help
Mar 10, 2010 - My fiancee's '99 Accord EX Coupe 4-cylinder automatic, with 130,000+ miles, has recently (in .... No low RPM & feeling like it's GOING TO stall.

99 Honda Accord - Strange Stalling Issues! HELP!

https://www.2carpros.com/.../1999-honda-accord-99-strange-stalling-issu...
My 1999 Honda Accord is having sporadic stalling problems. I've noticed a pattern. Itstalls while going slow speeds and stop and go traffic, etc. The engine just ...

Stalling or Low Engine Idle Speed Due to Dirty ... - Repair


Jan 02, 2016 | 1999 Honda Accord

1 Answer

1998 Mazda 626 RPM dropping problems and then engine stalls with no engine code thrown


Engine stalling and rough run issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Sep 07, 2012 | Cars & Trucks

1 Answer

1991 Chevy Caprice has a mild miss fire and stall at low rpm: This is my latest update: I checked and cleaned the EGR,PCV,IAC valve, M.A.P sensor and Throttle body(bore/butterfly). with carb cleaner....


Do you have the idle speed turned up to keep it from dying? Because it is high. Check engine light on? Have you checked for vacuum leaks at the gasket under the throttle body? How does the car run under acceleration? You might have a worn distributor shaft.

Jun 22, 2010 | 1991 Chevrolet Caprice

1 Answer

1996 Mercury Mystique 2.0L stalling


Drive it to Autozone or similar place and ask them to scan the car because the "check engine light is on". Most likely it will be a TPS switch. In area of $30 for part. It takes about 20 minutes to do. Most of time spent getting to part. But see what scan shows.

Aug 15, 2009 | 1998 Mercury Mystique

1 Answer

Eclipse won't idle .


Throttle body, IAC or EGR valve.

Mar 12, 2017 | 2003 Mitsubishi Eclipse Coupe

Not finding what you are looking for?
2002 Ford ZX2 Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...