Question about 2004 Nissan Sentra

1 Answer

Disconnected wires - electric windows won't work

Hi. Someone crashed into the side of the car... and have had to take the inner cover off. This meant I disconnected the wires.

The thing is not sure how to put them back in the right way - don't want to short circuit the thing, but the electric windows won't work anymore :S

Please could you help? Maybe somebody has a descriptive diagram of the inside of the car door, as in where each wire goes?

The car is an 04 Reg Nissan Almera 1.5, 5 door... is there anything you peeps could suggest? Anything will be appreciated

Cheers

Igor

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Go to local library and get the diagram (if they have a hanes manual etc). If not go to nissan dealer and fork out the 100 dollars for the shop manual. Best investment you will ever make.

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you know what fuse allows power to the electric windows? There is no power to the windows.


1) is that the only electric thing that is not working on this car? If you have others, there might be loose wire connection, disconnected cable, loose ground wire.,,etc..
2) in the cars after 95 there are 2 fuse boxes - 1 inside the car, close to steering wheel base or on the left side an 2nd will be in the motor compartment. On the fuse box cap/lid usually there are pictures, explaining which fuse is responsible for which part/circuit and also text with descriptions. If you are able to locate the fuse - get someone to check it for its condition
3) Google you car model problem and you will find resolutions if someone has experienced same thing/s
4) is there any of your fuses burnt out? Get an electrician to check them.
5) go to your closest book store and look for your car model repair manual. Read and follow safely the steps to diagnose
6) talk with people that have the same car- they might resolved this problem already

note: Be safe when checking electric parts.

Jun 06, 2015 | 2000 Mercury Sable

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

2 Answers

How do I fix my drivers side electric window on 2005 mercury mountaineer? All other windows work


Hi
it happen with me also actually the problem is the power window get jammed from the inner part..... you if you able to open it just open now clean it well then spray the lube into it and for a long time it work properly..... thankyou
fix-drivers-side-electric-window-2005-jserdy1edku5qfscwskpevsm-4-0.jpg

fix-drivers-side-electric-window-2005-jserdy1edku5qfscwskpevsm-4-2.jpg

fix-drivers-side-electric-window-2005-jserdy1edku5qfscwskpevsm-4-5.jpg

May 24, 2014 | 2005 Mercury Mountaineer

1 Answer

Electric window 1991 prelude goes down but won'come up


No easy fix, or override for that. You have to pull the inner door panel off and hot wire the window motor to get the window up. With the panel off, you can diagnose the problem, maybe a broken feed wire where it enters the door.

Apr 18, 2012 | Honda Prelude Cars & Trucks

1 Answer

Ferrari 599 electrical system failure, engine controls system failure, and low transmission fluid. Car electric windows and side mirrors stopped working including drivers side central locking


Hi

Have you checked the relay's ? with so many electrical faults I would take a good look at the fuse box especially on a Ferrari as they have been known to set fire and destroy the car. Disconnect the battery and start to test the wiring from the fuse box back over. Has the car had any work done recently? has it ever been in a crash ?

please give me more info
Regards
Dan

Jan 02, 2011 | 2011 Ferrari 599

2 Answers

The drivers side windows won't work. Where is the fuse box for the windows


might not be fuse , u need to check out the power and grounds to that door, i would have someone look at it unless u are able to use a test light and get into the back of the window switches and see if when u move the swtich it gets power and groud to the motor.

Aug 25, 2010 | 1997 Dodge Intrepid

1 Answer

VW Polo disconnected electric window wire


Yes, add a piece of wire, so they can flex, and twist together and cover with electrical tape.

Dec 14, 2009 | 1995 Volkswagen Jetta

1 Answer

Need instructions to replace drivers side rear view mirror glass.


Outside Mirrors REMOVAL & INSTALLATION The mirrors on these models can be removed from the door without disassembling the door liner or other components. Both left and right outside mirrors may be either manual, manual remote (small lever on the inside to adjust the mirror) or electric remote. If the mirror glass is damaged, replacements may be available through your dealer or a reputable glass shop in your area. If the plastic housing is damaged or cracked, the entire unit will need to be replaced. Manual
  1. Remove the set screw and the adjustment knob, if equipped.
  2. Remove the delta cover; that's the triangular black inner cover. It can be removed with a blunt plastic or wooden tool. Don't use a metal prytool; the plastic will be marred.
  3. Fig. 1: Use a tapped ended tool to pry the trim from the mirror 89550g29.gif

  4. Depending on the style of mirror, there may be concealment plugs or other minor parts under the delta cover — remove them.
  5. Support the mirror housing from the outside and remove the three bolts or nuts holding the mirror to the door.
  6. Remove the mirror assembly.
  7. Installation is the reverse of removal.
  8. Power
    1. Turn the ignition key to the OFF position. Disconnect the negative battery cable. Wait at least 90 seconds from the time the negative battery was disconnected to start work. CAUTION
      Some models covered by this manual may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in Section 6.
    2. Remove the delta cover; that's the triangular black inner cover. It can be removed with a blunt plastic or wooden tool. Don't use a metal prytool; the plastic will be marred.
  9. Depending on the style of mirror, there may be concealment plugs or other minor parts under the delta cover — remove them.
  10. Depending on the type of door trim, you may need to remove the door inner panel to access the electrical wiring harness for the mirror.
  11. Support the mirror housing from the outside and remove the three bolts or nuts holding the mirror to the door.
  12. If the wiring to the electric mirror was not disconnected previously, detach it now. Some connectors can only be reached after the mirror is free of the door. Remove the mirror assembly.
  13. Installation is the reverse of removal. Cycle the mirror several times to make sure that it works properly.

Jul 23, 2009 | 1996 Toyota Camry

1 Answer

Location of window circuit breaker


All of the window motors utilize the same circuit breaker. Look for a broken wire between the left side of the dash, which goes thru the inner fender to the door. According to my 1988 schematic, the wire you are looking for should be BLUE, and should have 12 volts with the key on.

Oct 02, 2008 | 1988 Toyota Camry

Not finding what you are looking for?
2004 Nissan Sentra Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...