Question about 2003 Hyundai Santa Fe

1 Answer

My 2003 Hyundai Santa Fe ABS light is staying on but the ABS is not engaged.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Here are all the possible problems which can turn on your ABS light.

C1101 Battery voltage over volt: 18V or more ○ ○ BR - 69
C1102 Battery voltage low volt: 9.5V or less ○ ○ BR - 69
C1200 FL wheel sensor: open or short to ground ○ ○ BR - 66
C1201 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1202 - No signal: air-gap error or wrong excite ○ ○ BR - 68
C1203 FR wheel sensor: open or short to ground ○ ○ BR - 66
C1204 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1205 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1206 RL wheel sensor: open or short to ground ○ ○ BR - 66
C1207 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1208 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1209 RR wheel sensor: open or short to ground ○ ○ BR - 66
C1210 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1211 No signal: air-gap error or wrong excite ○ ○ BR - 68
C1604 ECU hardware: ECU internal or valve failure ○ ○ BR - 70
C2112 Valve relay: valve relay or fuse failure ○ ○ BR - 70
C2402 Motor-Electrical: open or short to battery, motor relay, fuse or motor lock fail ○ ○ BR - 71
C1503 TCS switch failure δ ○
C1605 CAN Hardware failure δ ○ BR - 71
C1610 CAN Bus off failure δ ○ BR - 71
C1611 EMS Time-out failure δ ○ BR - 71
C1612 TCM Time-out failure δ ○ BR - 71
C1613 TCM Un-matching failure δ ○ BR - 71
C2227 Brake disc overheat δ ○
C1274 G-Sensor signal fail (only 4WD) ○ ○ BR - 72
C1275 G-Sensor open or short to ground (only 4WD) ○ ○ BR - 72
You'll need a scanner which is compatible with Hyundai's ABS system to retrieve any DTC's (Diagnostic Trouble Codes) stored in its computer. Any time the ABS light comes on, there's a DTC stored in its computer - that code will tell you where the problem exists. Then you can go from there.

Posted on Jun 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs light stays on on my 2004 Hyundai Santa fe


The light is telling you there is a problem with the system and as long as the light is on the system is disabled.
You need to have someone scan the body computer for trouble codes.

Aug 22, 2012 | 2002 Hyundai Santa Fe

1 Answer

Santa Fe Hyundai 2003 headlights.


If you only have two headlights ,the low beam part of light is out

Jul 14, 2012 | 2003 Hyundai Santa Fe

1 Answer

The brake light on my dashboard has been coming on and staying on in my 2003 Hyundai Santa Fe. What does this mean?


This can mean one of a few things.First, make sure your parking brake is fully released and not even slightly engaged.Next, check your brake fluid level.A low level will trigger a brake light.which this is probably your concern.Finally, your abs(if equipped) could be failing.More than likely it is simple enough as a low fluid problem.Have all four corners checked to make sure all your brakes are up to par and you should be ok.Hope I could help.Rate me accordingly.Thanks!!

Oct 13, 2010 | 2004 Hyundai Santa Fe

1 Answer

I have a 2002 Hyundai Santa Fe. The AB@ and TCU


bad abs sensor on one of the wheels would be my guess.

Jul 27, 2010 | 2002 Hyundai Santa Fe

1 Answer

2002 hyundai santa fe ABS braking system engages at slow speeds often when brakes are not even being applied


you have a weak abs sensor use an ohm meter and compare it with the others and check the frtwires for cracks

May 16, 2010 | 2002 Hyundai Santa Fe

1 Answer

ABS braking system engages at slow speeds or while


Are there any malfunction lights coming on? If so then it could be a wheel speed sensor. sometimes people confuse rotor vibration with abs pulsation.

Apr 28, 2010 | 2002 Hyundai Santa Fe

2 Answers

2003 Hyundai Santa Fe ABS light is on along with TCS light


you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Jul 14, 2009 | 2003 Hyundai Santa Fe

1 Answer

Abs brake light stays on


There is no ABS brake light. Take the vehicle back to whatever service center/garage did the brake work and tell them to fix it.

Apr 05, 2009 | 2003 Hyundai Santa Fe

1 Answer

The rear hatch on my 2003 Hyundai Santa Fe won't stay up.


Yes. Your Local Auto Parts Store should Carry these as Direct Replacements. If Not, Sears Carries them.

Jan 23, 2009 | 2001 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

4,078 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...