Question about 1999 Daewoo Lanos

1 Answer

Binding brake how to adjust hand brake on daewoo lanos 1.6 (s reg) driver rear binding

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

Hand brake cable adjuster lives under centre console at rear 10mm spanner required unadjust this and then remove rear drums to adjust linings so they just drag on drum then go back and adjust cable in car

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I adjust parking brake


If Disc brakes jack up wheels , make sure the cable is not binding or frozen , pull hand leaver on three clicks, adjust cable till brakes just start to bind, release hand brake and check the wheels are free to turn. Drum brake check cables are free, back off cable till slack, check lining to drum adjusters are free and adjust if need be, pull hand brake on three clicks, adjust cable so brakes just start to bind release hand brake and make sure the wheels are free to turn ,

May 27, 2015 | Cars & Trucks

1 Answer

Please show me a picture that shows the position of oxygen sensor on a daewoo lanos 1999 model 1.6 litre


Oxygen Sensor

1999 Daewoo Lanos 1.6L MFI DOHC 4cyl

The Oxygen Sensor is located: Under hood, driver side, lower engine area, above exhaust pipe flange, mounted in exhaust manifold,don't have a picture.Here's a link to what it look's like just remove the electrical connector,get a open end wrench and remove.. http://www.autozone.com/engine-management/oxygen-sensor/bosch-oxygen-sensor/daewoo/lanos/1999/4-cylinders-6-1-6l-mfi-dohc/4971_102074_1784_97999

May 25, 2015 | 1999 Daewoo Lanos

2 Answers

I have a daewoo lanos 1999 and when I press the brakes the brake light does`nt turn on what should I do?


It could be one of three things, the bulbs could have burnt out only for the brake filament...replace a bulb and check.
There is a sensor under the brake pedal that turns those lights on..that could be broken, it looks like a button.
Could also be a fuse, but thats the least likely.

Mar 02, 2011 | 1999 Daewoo Lanos

1 Answer

Seat and steering adjustment on the daewoo lanos


check uder or to the sides to move the seat and to adjust the steering wheel there should be a small leaver at the left side of the steering wheel

Jun 04, 2009 | 1999 Daewoo Lanos

1 Answer

Brakes


rears first then fronts ,just undo nipples and let it drip on its own when no more air bubbles close the nipple ,and dont re-use the old fluid it has absorbed water from air because its hydroscopic

Jun 02, 2009 | 1999 Daewoo Lanos

2 Answers

Rear passanger side brake locks up when stopped


  1. Possible air in Driver side rear giving pass side upper hand so to speak
  2. Has drum ever been wet with brake fluid?
  3. driver side REAR self Adjuster rusty and not working properly
  4. Sticky Wheel cylinder at rear driver side

Jan 13, 2009 | 1995 GMC Sierra C1500

2 Answers

2000 daewoo lanos head torque


the 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .

58bb502.jpg

there ya go , gears to the left , looking at the front of engine .

Jan 09, 2009 | 2000 Daewoo Lanos

1 Answer

Daewoo lanos


your brakes are keeping i on the dum try a puller and a hammer

Oct 18, 2008 | 1999 Daewoo Lanos

1 Answer

Daewoo front brakes


The single-piston floating-caliper disc brake is self-centering and self-adjusting. The caliper is able to slide from side to side so it will move to the center each time the brakes are applied. Also, since there is no spring to pull the pads away from the disc, the pads always stay in light contact with the rotor (the rubber piston seal and any wobble in the rotor may actually pull the pads a small distance away from the rotor). This is important because the pistons in the brakes are much larger in diameter than the ones in the master cylinder. If the brake pistons retracted into their cylinders, it might take several applications of the brake pedal to pump enough fluid into the brake cylinder to engage the brake pads

f57055e.jpg

Aug 25, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...