Question about 1996 Mercury Villager

1 Answer

In my 96 mercury villager the auto locks r going crazy. the driver door wont stop locking on me. i would try to manually hold the unlock botton in & when i let go it just locks up the whole van...all the doors. i can manually unlock the sliding door & pasenger door & have to get out that way. how do i fix the hauted door lockes...HELP i need to be able to open my back door bc im moving this weekend. & i cant manually unlock that one. i dont have keys to the doors when got the van, just the ignition key

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

Http://autos.groups.yahoo.com/group/villagerquest/go here and read the files on this issue.You have water in the door lock actuator connector or you have a wire shorting out on the sharp inner door panel.Also, you can cut a wire that will stop this circuit from working because you don't need it anyway. In the links is the procedure.

Posted on Jun 08, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: What ATF is needed for Mercury Villager 96?

really any kind is usable but if you have been using synthetic then stay with that but its old enough that you can use just regular ATF. If you want to get the exact type call or go into your local auto part store and they should be able to tell you.

Posted on Jan 27, 2010

  • 416 Answers

SOURCE: 96 Mercury Villager front blower control only works on high

check blower motor resistor

Posted on Jan 31, 2010

freetek
  • 5568 Answers

SOURCE: Where can I get a diagram or photo of the engine

I would recommend purchasing the Haynes service manual for your vehicle. We have one in each of ours and it will answer most all of your questions and let you estimate how much a given repair will cost for labor too if you are not planning on doing your own maintenance.
Mercury-Nissan manual
You can also find them new and used on eBay or sometimes in your local library.

Posted on Mar 17, 2010

alicantecoli
  • 22114 Answers

SOURCE: i need the firing order

153624 is the most common firing order

Posted on Nov 14, 2010

  • 827 Answers

SOURCE: how do i replace the door handle on the sliding

These are fun,. it would be in your best interest to contact your local library and see if they have the chilton and or haynes repair manual for your vehicle in stock,. if so, go take it out and read it as this can/ will be tricky at best otherwise.

If your local library doesn't have it, try your local auto parts store for around 25 bucks...

FYI: CALL FIRST & CONFIRM the book is there, otherwise it may have been hijacked from the library and not recorded...

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Re 1994 Mercury Villager: where is the fuse for the power locks? the manual shows everything but that one. We cannot lock the Van because it just auto unlocks itself within minutes so we want to take out...


go to villager quest yahoo group for more help.

I think you have a bad driver door lock actuator. You have 4 in vehicle and one usually casues this. Each door and hatch have them.

gerry

Sep 28, 2011 | 1994 Mercury Villager

2 Answers

Where do I find the keyless entry code for my 1999 Mercury Mountaineer? Then when I use the remote to unlock or lock the Mountaineer, the locks will pop up or the horn will blow or all four locks will...


TRY THIS REPROGRAMMING PROCEDURE. SWITCH THE IGNITION OFF TO ON 8 TIMES WITHIN 10 SECONDS. DOORS SHOULD LOCK THEN UNLOCK. PRESS ANY BUTTON ON THE FIRST REMOTE TRANSMITTER. DOORS SHOULD LOCK THEN UNLOCK. IF YOU HAVE ANOTHER CAR REMOTE REPROGRAM IT THE SAME WAY. WHEN DONE SWITCH IGNITION SWITCH OFF.

Jan 27, 2011 | 1999 Mercury Mountaineer

1 Answer

How do I replace the door lock actuator on a 1999 Mercury Villager w/o damaging the connecting rods and door track?


SECTION 501-14A: Handles, Locks, Latches and Mechanisms 1999 Villager Workshop Manual REMOVAL AND INSTALLATION Actuator —Power Door Lock, Front Removal
  1. Remove the front door latch. For additional information, refer to Latch—Front Door .
  1. Remove the power door lock actuator from the front door latch.
    1. Release the locking tabs.
    1. Remove the power door lock actuator from the front door latch.
583b623.gif
go here too

http://groups.yahoo.com/group/villagerquest/

Sep 26, 2009 | 1999 Mercury Villager

1 Answer

1997 villager just started locking the doors automatically


This is a common issue. You have poorly adjusted inside lock rods, or water in your door lock actuator connector behind the door trim panel , or you need to cut one wire in the driver door wire harness to defeat the autolock function. Go here for info on what to do. See files and also links for this issue. http://autos.groups.yahoo.com/group/villagerquest/

Jun 05, 2009 | 1997 Mercury Villager

2 Answers

My van's doors keep locking by themselves


either you have water in the door lock actuator connecotrs in one of the doors. or a misadjusted lock rod for the inside lock switch or a wire shorting out in one of the doors (for the lock actuator).
This was an issue for earlier models through 1997. If no luck with those, you will have to cut a wire in the driver door lock actuator harness that will eliminate you being able to lock or unlock all doors at once with the key in hte driver door lock cylindr.

go here for Villager help.

http://autos.groups.yahoo.com/group/villagerquest/

Look in the photos and files and ask questions via email. we will help you.

May 04, 2009 | 2000 Mercury Villager

1 Answer

Doors locks


go here and read files on this issue and how to fix it,

http://autos.groups.yahoo.com/group/villagerquest/

Apr 03, 2009 | 1995 Mercury Villager

Not finding what you are looking for?
1996 Mercury Villager Logo

Related Topics:

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...