Question about 2005 Dodge Ram 1500

1 Answer

2005 dodge ram drivers door lock not working from outside

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 66 Answers

Remove the door panel and check the linkage from lock cylinder to the latch. There are plastic clips that can break.

Posted on Jun 10, 2009

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: i have a 2005 dodge

Did you figure out what was wrong? I'm having the exact same problem.

Posted on Jan 02, 2011

  • 247 Answers

SOURCE: I have a 1997 Dodge Ram Picup. The power locks on

Hello, the first thing we need to inspect is the encased wires the run from the door jam to the door. If you open the drivers door, you will see a black wrap plastic sleeve. Inside that sleeve the wire are going through. You will need to open the sleeve up, sometimes there is a **** already in it. Look at each wire to see if there is a break in it or you may find some of the already broken off. This issue is often found the problem, and most makes and models that use this type of wire routing has the same issues. The noise you are hearing possibly from a broken wire(s) might be a relay that is not getting fully grounded, causing this noise. Hope this helps you isolate you concern. Craig

Posted on Jan 23, 2010

Testimonial: "Checked all the solutions you suggested. None of the wires were broken but it did lead me to the problem. It was corroded terminals on the switch plug"

  • 9 Answers

SOURCE: 2005 Dodge Ram drivers side door lock does not

there is something jaming the handle or broken. remove door panel. check to see if or what is jamed bent or broken. easy to repair.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a 2nd fuel filter located underneath the truck outside of the fuel filter on a 2005 dodge ram 1500 4.7 v8


The only fuel filter on the truck is located on the driver side, under-neath the door on the frame rail.

Oct 28, 2016 | 2005 Dodge Ram 1500

1 Answer

Manual door lock linkage repair 2005 dodge 1500 the rod has broken louse and fell need to know how to recorect


remove the door trim and you will find a rod that is held in place in the door latch by a plastic (what remains of it) clip. There may be replacement clips available from the dealer spares otherwise cruise the wreckers and get some spares . They go brittle and break off. There are steel one that will do the same job

Jul 21, 2014 | 2005 Dodge Ram 1500

2 Answers

My door locks won't work. They aren't working with the remote or the switch in the car. I can manually push them down, but even using the key in the door only unlocks the driver side.


In drivers side is damaged the driving motor for central doors locking. When is not works other doors also do not work! Try to unlock the car from the passenger side and you will see that the door is open all outside the driver's door! So you know that there is a problem!

Jun 30, 2010 | 2005 Dodge Caravan

3 Answers

2005 Dodge Ram drivers side door lock does not work, can only open door from inside using handle. Lock knob won't pull up.Key won't turn enough to unlock door


there is something jaming the handle or broken. remove door panel. check to see if or what is jamed bent or broken. easy to repair.

Mar 14, 2010 | 2004 Dodge Ram 1500

1 Answer

2005 Ram 2500 quad cab driver side stays locked


reset this by disconeting battery whilst car is unlocked make sure u take keys out b4 doin this then reconect battery with doors closed this shud rset the door open and release modes problem solved

Jul 27, 2009 | 2005 Dodge Ram

2 Answers

Power lock and dome light does not come on when door is opened.


I had the same problem with my 2005 dodge ram 3500 and found the wires were being pinched that run through the rubber boot on my right rear door. I had this fixed by dodge but there splice didn't last, so I took some 16ga wire and spliced it into the wire that operates the power door lock on that side and it fixed the problem. Dodge service shop did a sad job of splicing the wires back together by twisting the wires together and tape and wire broke.

Feb 21, 2009 | 2004 Dodge Ram 1500

1 Answer

Door lock problem


Most probably the lock actuator is frozen in down position. it could be your lock cylinder, but the actuator is the most common problem. You have to remove the inner trim panel to access it.

Dec 27, 2008 | 1997 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...