Question about 2000 Kia Sportage

2 Answers

I need the timing belt replaced on 2000 kia

I need the timing belt replaced on 2000 kia sportage 2.0 what should that run me for labor only

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

That depends on if you are replacing it before or after it stops working. The engine is an interference engine and if the timing belt goes out, it could damage the head and cost you around $1500. before it goes out you should be able to get it done for about $500 plus parts.
P.S. get the water pump replaced at the same time for a little extra as long as the front of the engine is being taken apart.

Posted on Aug 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Kia Master
  • 3,433 Answers

I just saw an estimate of 850 for a water pump,timing belt and front crank seals So figure the labor range on yours around 300 to $450.00. Good Luck

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Kia Sportage timing belt broke, how much to fix it?


2002 kia sportage was $500 labor plus parts. Part alone is about $120

Aug 20, 2013 | 2000 Kia Sportage

1 Answer

If the timing belt slips do the valves bend on a 2000 sportage 2.0 l


Yes, unfortunately this engine IS an interferance engine. The only way to tell if anything is bent is to install a new belt and see how it runs or perform a compression test. Let me know if you need anything else.

Jul 02, 2010 | 2000 Kia Sportage

2 Answers

Changed timing belt on 2001 kia sportage but still runs rough


I would check the connectors on the coil packs, spark plugs and wires and replace them if they at all seem worn or tired. My 2000 sportage ran rough so I replaced the fuel filter, coil packs, spark plugs and wires, cleaned out the IAC valve, TPS, throttle body and intake tube, tightened the screws on the fuel pump access door under the right rear seat and cleaned the ground wire and the contact surface and I added 1 ground wire from the block to the firewall and 1 from the valve cover to the firewall. Your timing is more than likely right where it needs to be but the ignition may be slightly missing from a bad coil pack, dirty or fouled plugs or a bad plug wire.

Jun 01, 2010 | 2001 Kia Sportage

1 Answer

Kia Sportage 93171K


evap purge valve fault is your p0443
p1693 is manu. controlled aux input output fault
p1693 is a code for an open or short to ground for the check engine light
does it light up when key is on? if so then it is a left over code from some previous repair attemt
the evap code wont prevent starting
check for broken timing belt
check for fuel in tank and that it has proper fuel pressure

May 08, 2010 | 2000 Kia Sportage

3 Answers

In a 2001 2liter Kia the timing belt broke.. Can I just replace it or do I need to have the valves checked first.? I heard that Kia fixed that problem of bending valves in this model.


Although a KIA manual will state that this is an interference engine, it is not. I know because I have replaced a shredded timing belt on my used 2000 Sportage to take it home and it ran great. Just recently, the timing idler pulley bolt broke while I was driving causing the belt to come off. I replaced the tensioner pulley and drilled out and re-tapped the idler bolt hole and installed the new idler and the belt (it was only 2 months old at the time) and it runs great again. THESE ARE NOT INTERFERENCE ENGINES!!!! you don't have to tear down the top end of the engine to inspect for any damage and it is very simple to install a timing belt on this motor as long as it is done properly.

Apr 03, 2010 | 2001 Kia Sportage

1 Answer

What are the timing belt settings for a 2000 sportage


2wd or 4wd as they have different engines

Jun 28, 2009 | 2000 Kia Sportage

1 Answer

Car won't start


k is there power to fuel pump? yes,,, check grounds..... NO check relay only get kia relays for main and fuelpump since o2s run on the same relay,..... if relay is good suspect comp.... mine has same problem with no power to fuel pump i have now traced problem to ecu sux but at least it has a new fuel pump and relay lol.....

Jan 31, 2009 | 2000 Kia Sportage

2 Answers

Rough and noisy idle


i have a 2000 kia sportage the timing belt broke and the 2.0 is a zero clearance motor.you need to find out if it bent the valves.it did in mine.

Aug 24, 2008 | 2000 Kia Sportage

Not finding what you are looking for?
2000 Kia Sportage Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...