Question about 1998 Plymouth Grand Voyager

1 Answer

On many bolts on starter and location , on a 98 Plymouth Grand Voyoger

Posted by on

  • yadayada
    yadayada May 11, 2010

    don't understand the question

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

3 bolts going through starter into bellhousing

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 Plymouth grand voyager se wont start when keys is turnsd


clean battery connections, switch starter relay with horn relay. if still nothing starter is cooked. need a new one.

Mar 11, 2013 | Plymouth Voyager Cars & Trucks

1 Answer

Do you have to take the engine out of a 98 grand plymouth voyager to get the altenator out?


No, but you may have to remove the engine mount bolts where they attach to the body on the passenger side, and lift the motor a bit to get clearance.

Sep 04, 2011 | 1998 Plymouth Grand Voyager

1 Answer

98 grand plymouth voyager...what is the best way to get the long bolt on the bottom of the altenator off? Its not wanting to come off!


There is a nut on the back side of that bolt. Very difficult to reach. Usually a fingertip type project. Even worse to get back on.

Sep 04, 2011 | 1998 Plymouth Grand Voyager

1 Answer

How many bolts on a 98 grand plymouth voyager altenator?


Two. One short one on top which goes through the removeable top bracket and threads into the alternator. One long one on the bottom which has a nut on the back side of it. The nut in a pain in the keyster to reach to remove and re-install.

Sep 04, 2011 | 1998 Plymouth Grand Voyager

1 Answer

Location of starter in 3.3L 1991 Plymouth Grand Voyeger


front rigth side of engine . if you follow positive side cable it will lead to the starter .two bolts (long) pos.batt. cable an two switch wires off comes starter

Nov 20, 2010 | 1991 Plymouth Grand Voyager

1 Answer

Removing starter 98 plymouth voyager 3.3


3.3L & 3.8L Engines To Remove:
  1. Disconnect and isolate the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Disconnect the wiring from the starter and starter solenoid.
  4. Remove the starter mounting bolts.
  5. Remove the starter and spacer from the bellhousing.
To Install:
Starter motor removal/installation (3.3L & 3.8L engines) chry-02-33-788.gif

  1. Place starter spacer in position on bellhousing, make sure flange is toward flywheel.
  2. Place starter in position on bellhousing.
  3. Install the mounting bolts and ground wire. Tighten the bolts to 40 ft. lb. (54 Nm).
  4. Connect the wiring to the starter and solenoid.
  5. Lower vehicle.
  6. Connect the negative battery cable.
  7. Verify correct starter operation.
prev.gif next.gif

Oct 13, 2010 | 1998 Plymouth Voyager

1 Answer

Where is the camshaft position sensor located on a 98 plymouth grand voyager and how to fix it?


Guessing it's a 6 cyl, 3.0L, but should be located on transaxle housing above vehicle speed sensor.

Aug 17, 2010 | 1998 Plymouth Grand Voyager

1 Answer

Installing a starter on a 1999 Plymouth


jack up the front of the van support it on jack stands blck the rear wheels it's better to do it on level ground:) disconnect the negative battery cable and remove the two starter bolts holdind the starter up be carefull when removing the starter as it can be a little heavy when dropping it down also make a note if there are any shims in between the starter and engine to replace them whren putting it back together. also make sure you note the wiring connections so the can be replaced in the same order they are removed. it's basically like a puzzle:) the starter is located right next to the transaxle good luck:)

Apr 17, 2009 | 1999 Plymouth Grand Voyager

1 Answer

1998 Plymouth Neon only "clicks" when you try to start it.


Hello;
Check the voltage at the battery. It should be in the 12.5+ volt range. Check your connections also to be sure they are clean and tight. A quick check to see if there is enough juice to crank the engine over is to turn the ignition switch to start and at the same time honk the horn. If the horn blows and the starter does not crank, you probably have a bad starter.
The starter is located on the radiator side of the engine block and is held to the transaxle by 2 bolts. Follow the positive cable to the starter. Hope this helps;
Thanks;
Rich
RPM Northwest

Jan 26, 2009 | 1998 Plymouth Neon

1 Answer

I can only see one of the starter bolts...


There shouldn't be any hardware to remove to get to the starter bolts. You should try removing the bolt you can see and see if the starter comes off. There is a small chance the other bolt is broken. It may be in a spot you can't see as well. You may have to try to feel around the starter in places you can't see and feel for a bolt.

Nov 13, 2008 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...