- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a 2001 and just replaced the fuel pump assembly in the tank because the fuel gauge didn't work or worked irratic. After talking to the partsman it sounded like this was common. The contact for the sensor wears away and looses contact. You will see that the new fuel pump module has different type of metal wiper contact. As for the heated seats, I have an issue with driver side also and haven't had a chance to look into it yet.
Before you start your van, and the key's are on accesory. Does your needle move? If it does, your gage is good and you have a bad ground or wire harness. Worst you could have a bad sending unit and that is in the gas tank it self. Start with checking all the wire connection. Good luck.
This may be related to a loose battery cable or alternator concern, low voltage can cause these concerns as well as an alternator problem, also this could be related to the body control module, Go to a Kragen, Auto Zone and have the battery and alternator tested, it's free, let me know the results.