Question about 2000 Renault 181

1 Answer

Radio the radio on my megane bleeps evry couple of seconds the switchs off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Renault Master
  • 4,869 Answers

The radio requires a code to be entered

If you do NOT have the code ......................................

.First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc) 

To see if your code is available here for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .

If not then POST ANOTHER QUESTION

quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING

note: Unfortunately not all radios can be decoded using the Serial Number 

If not then try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive 


Posted on Sep 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Oil service light


with all doors closed and ingnition off put one foot on brake pedal and one on accelaretor pedal push both of them to the floor at the same time once you have pushed them down hold them down to the floor and switch ingnition in the display it will say oil service in progresion after about 15 to 20 seconds you will hear a bleep and display will read oil service complete you must keep both feet on pedals and on the floor until you hear that bleep once it bleeps switch it back off release pedals and switch it back on oil service message would have been cleared

on Oct 02, 2011 | 2009 Ford Focus

1 Answer

Change radio setup to scan frequency from evry 200khz to evry 50khz





  1. Radio ON, tune to the XM channel 0 and record the radio ID. The radio ID will be required for activation of the new receiver.
  2. Call XM radio to deactivate the faulty receiver and activate the new receiver.
    • US: 1-800-556-3600
    • Canada: 1-877-438-9677
  3. Park the vehicle outside in an area with an unobstructed view of the southern sky.
  4. Leave the vehicle outside with the ignition switch in the ACC position and the radio ON, tune to the XM channel 1 for 30 minutes to activate XM service.
  5. Once activated, the radio will receive the remaining XM channels.
  6. XM is trade mark

Sep 09, 2014 | 2010 Chevrolet Spark 1.2

1 Answer

RENAULT MEGAN RADIO


Leave radio on. For aproximately 30 mins

Jun 08, 2014 | 2000 Renault 181

1 Answer

How do i key in the code to my radio i have the code it an audi concert radio 1998 a4 thanks


Once you get the zeros on the display use the up arrows to increase the first digit to the first number of the code then use the right arrow to move to the second digit and continue until you get all digits in then press the mode button for 3 seconds until it bleeps and switches on

Aug 27, 2010 | 1996 Audi A4

1 Answer

Megan Radio Codes


you can only put the code in if 4 zeros are shown if there are 4 dashes leave the radio on till the 4 zeros show can take over an hour then using the remote next to the steering wheel r/h side use the wheel to move the number up/down to the right number then press the button on the bottem to move to the next number after all numbers press and hold the bottom button to enter the code

Sep 02, 2009 | 2000 Renault 181

2 Answers

Radio problem, keeps beeping and saying code.


On the controls on the steering wheel hold the vol + & - for a couple of seconds and this should bring up the 0000 on screen and then its a case of spinning the wheel control on the side and holding + & - to set it.

May 21, 2009 | 2000 Renault 181

10 Answers

My renault scenic radio says code i am unable to enter the digits for the code


Hi - the way to enable code mode is to turn off the radio - then hold down 2&5 & press the on button - this will bring you into the 0000 code mode.
Regards Paul

Feb 22, 2009 | Renault SCENIC Cars & Trucks

2 Answers

Renault laguna alize radio


there is a wheel on your steering volume control.if your code is ,say 1234,turn the wheel down 1,untill 1 appears on the dash.under the wheel on the bottem is a butten,press once.the number on dash,should say 1 and the second number should flash.turn wheel again for second number,press button under nieth.3 and 4 the same way.ON THE FORTH NUMBER,HOLD THE BUTTEN UNDERNEITH UNTILL IT BLEEPS,RADIO SHOULD NOW BE ON MEGANES CLIO,R THE SAME , GOOD LUCK. STE A SCOUSER

Aug 08, 2008 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...