Question about 2000 Chevrolet Blazer

1 Answer

Abs light replaced front hubs on my chevy blazer 2000 4x4 and abs light still on. new hubs an sensors

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 3,433 Answers

Turn on ignition switch and system should chk itself. If all is right the light should drop out..You may have to drive it for the sensors to register presence.

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the speed sensors on a 2004 chevy trailblazer?


Assuming that you're talking about the front wheel speed sensors...
Your best bet is to replace both from wheel hub/bearing assemblies.

They'll cost about $100-$150 each.
When the wheel speed sensors are setting ABS codes it usually means that the bearings are bad.
When you replace the whole hub assembly, a new sensor is already installed in that hub. If it just the sensor (unlikely that just the front sensors alone are going bad) the sensor itself is usually 3/4 of the price of a new hub anyway.

Apr 24, 2012 | 2004 Chevrolet TrailBlazer

3 Answers

1998 chevy express van 3500 front brakes and rear are new, front calipers are new but ABS light on dash is on, the front brakes smoke after a little while of driving. Thanks Joe


I'd first make sure the new pads are the correct size. Doesn't happen very often but maybe the parts person gave you the wrong size pads ( for the smoking problem). As for the ABS light, most newer cars will throw out codes if you wait too long to change them out, I would contact a chevy dealer or search online about reseting the code (light).

Dec 07, 2010 | 1999 Chevrolet Silverado 1500

4 Answers

Why is my abs light on in my 03 chevy? and on the passanger side the front tire is roaring really bad when i drive, please help


Ok, there are sensors on your front wheel hubs. This could easily cause the abs light to turn on. The loud noise could easily be your wheel hub going bad. Easiest way to check, jack up the front of the truck, grab tire, shake back and forth and up and down. Same amout of play each way? You're wheel hub is bad.......

Aug 27, 2010 | 2003 Chevrolet Tahoe

1 Answer

I just replaced the front hub on the drivers side and my abs light is still what could the problem be now


On these hubs, there is the ABS sensor that controls many things like ABS and Traction control on alot of cars. Check to make sure the sensor is plugged in properly and not cracked. Clean gear on spindle that abs sensor is real close to to get good signal

Mar 08, 2010 | 2000 Chevrolet Blazer

1 Answer

What does a ABS sensor look like on a 97 chevy blazer


mid size blazer- take off wheel-brake caliper-brake caliper bracket- rotor-and behind the hub u will see a wire going into the back of hub and is secured by a hex/torx head bolt that is ur abs sensor it looks like a small cylinder with wires attached---on the s-10 blazer some of the abs sensors set ups-- are part of the hub assembly/wheel bearing would have to change the whole unit

Mar 05, 2010 | 1997 Chevrolet Blazer

4 Answers

I have a 1997 Blazer. The ABS light comes on intermittently. When the ABS light is on the power windows and blower motor do not work. When the ABS light is off everything works just fine. Help????


That sounds strange about the power windows and the blower motor not working when the ABS light comes on. I happen to have a 99 Chevy blazer and I had the ABS light come on several times. There are ABS sensors on the two front wheel bearing hubs. If you take off the front wheels you will be able to see a black electrical cable that has 2 wires inside of it. This cable is coming directly from the ABS sensor on the wheel hub and is strapped to a bracket the is on the upper ball joint. From the hub it then goes to a plug connector that is under the protective flap that you lift to change your spark plugs. What I found that is a common problem is that wire tends to corrode or doesn't have enough slack in it when making turns and starts to pull and break. Examine that cable and if you see any breaks in it, that will cause the ABS light to come on. Also if you can get to the plug underneath the flap, unplug it and use a multimeter to see if you are getting any resistance on the two wires. If you aren't getting any resistance then your sensor is bad or you have a broken wire to the sensor. On my vehicle the ABS light kept on coming goin on and off intermitently and I found that wire from the sensor to the plug had a break in it. I stripped the wires back, spliced them together, soldered them and I used heat shrink tubing to cover the connections. The ABS light went out and it has been fine ever since. Hopefully this will solve your problem as well.

Jan 24, 2010 | 1997 Chevrolet Blazer

2 Answers

Replaced front hubs on my 2000 chevy blazer 4x4 abs light still on ?


2 areas of concern here involving the ABS light:
  1. After replacing the hubs, bleeding the brake lines and replacing spent brake fluid
  2. Replace the ABS sensors
Hope this answers your question. Best of luck.
Greg

Jun 03, 2009 | 2000 Chevrolet Blazer

2 Answers

2000 chevy blazer braking problem


it could be the abs but every vehicle has hubs,,,lol

Dec 29, 2008 | 2000 Chevrolet Blazer

1 Answer

Abs light is on brakes are fine


it's the sensor in the hub bearing that is the problem. These blazers are well known for these to go. You have to replace the entire hub assembly in the front. About $180 each side! I've done it many times. My advise for you.., do NOT tow anything with these blazers or you will be replacing these hubs once a year!

Good Luck!

Nov 22, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...