Question about 2004 Mazda RX-8

1 Answer

Mazda rx8 fault code p0410 secondary air system we have a mazda rx8 2006 model, p0410 fualt code has come up, want should we looking to check, test and poss change?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 272 Answers

The P0410 code refers to the (secondary air system) emissions system. The AIR pump puts air to the exhaust to lower emissions. It takes in outside air and pumps it through two one-way check valves into each bank of the exhaust.
.
About 90% of the time that this code is set, the one-way check valves have worn out or failed and allow water (which occurs naturally in the exhaust) back into the pump. In any cold climate, especially in climates with higher humidity, this water may be more excessive. The water partially fills the AIR pump, it can then freeze. When the PCM commands the pump on, if the pump is frozen it cannot turn, thus overloading the circuit and "popping" the fuse.

A code P0410 may mean that one or more of the following has happened:

  • Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump
  • Blown AIR pump fuse due to freezing up
Possible solution:
This may be covered under the emissions warranty on the vehicle. If your vehicle is out of bumper-to-bumper warranty, check if the emissions warranty is still valid!
  • Replace the AIR pump AND one-way check valve
  • Test and clean the AIR pump AND test and replace the one-way air check valve
  • Replace the AIR pump inlet hose
  • Replace the AIR pump fuse (found under the hood)
It is really only an emissions issue and won't harm your car's engine ot drivetrain. It will however mean you won't pass emission testing if you live somewhere that tests for that like I do!

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi sir , i have problem in my car code p0410 and i checked co2 its 14.8 and high what is the part need to check or change


code p0410 refers to secondary air injection(AIR) system---malfunction====causes --wiring---AIR valve---AIR solenoid---ECM
check /replace the air solenoid and/or valve.

Jan 01, 2014 | 2005 Peugeot 407 2.2

2 Answers

What does this code mean? P0410


Diagnostic Test Code (DTC) P0410 indicates that your secondary air injection system is not functioning properly.
Not all 2001 Chevrolet Bazers are equipped with secondary air injection. The secondary air injection system was added to vehicles that were to be sold in certain areas where the emissions laws required it, like the State Of California.

The Powertrain Control Module (PCM) monitors the system by commanding the secondary air blower motor to run and the air injection solenoid to open. This causes additional oxygen to enter the exhaust system. The PCM then monitors the signal from the oxygen sensors to see if the commanded air has in fact, entered the exhaust system. Code P0410 sets when the PCM has commanded the blower motor on and the solenoid open and there is little or no change in the oxygen sensor signal.

GM has had some problems with these systems and there has been a Technical Service Bulletin (TSB) issued that addresses some of the known concers. Below is a brief description of the TSB and the issues involved.

Bulletin No.: 04-06-04-015A
Date: November 28, 2006
TECHNICAL
Subject:
LN2, L43 or L35 Engine SES/MIL Light Illuminated, AIR Pump Ingesting Water and DTC P0410 Set (Replace AIR Pump and Inlet Hose Assembly)
Models:
1999-2003 Chevrolet Blazer, S10
1999-2001 GMC Jimmy
1999-2003 GMC Sonoma
1999-2001 Oldsmobile Bravada
with Vortec 2.2L I4 or 4.3L V6 Engine (VINs 4, 5, W - RPOs LN2, L43, L35)
Condition
Some customers may comment on the SES/MIL light being illuminated. Upon investigation, the technician may find a DTC P0410 indicating that there is a concern in the secondary air injection system.
Cause
Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump.
Correction
Replace the AIR pump and install a new inlet hose and solenoid tube assembly...

The bulletin goes on and gives detailed information on how to perform the repair and the part numbers of the replacement parts needed to do so. Your local dealer can provide the parts for you and you can probably get them to print out a complete copy of the bulletin for you. It is not really hard to do if you want to do this yourself.

Sep 01, 2011 | 2001 Chevrolet Blazer

1 Answer

Am looking for what the carmd code p0410 means for a 2004 buick ranier - my car md is not working right.


CEL light/code P0410, secondary air system fault.
DTC P0410 - Secondary Air Injection System

Suspect -
Relay/fuse (box B) loc 3 ,15amps
Pump $434(new) / $243 (Remanufactured) / $95 (used,Ebay)
solenoid $73
check valve $18
http://www.autopartswarehouse.com

A new pump, or simulator!

What signals the ECU, if the seconary Air Injection system isn't working?
H20 sensors, if running rich > Xtime throw code!
The pump only runs when the engine is cold, so the air & rich fuel mix is burnt in the exhaust manifold, so there's less Emission.

May 09, 2011 | 1997 Volvo 960

2 Answers

Hi there, please can you help? I have a 2005 231bhp Rx8 thats not running properly. It is displaying fault code PO410, and the car will not rev, little better when cold but really struggles to get over...


CODE PO410 IS SECONDARY AIR INJECTION SYSTEM PROBLEM. POSSIBLE CAUSES AIR SYSTEM MALFUNCTION. RESTRICTED OR DAMAGED IN THE EXHAUST SYSTEM. RESTRICTED IN THREE WAY CATALYTIC CONVERTER.PCM MALFUNCTION.

May 05, 2011 | 2004 Mazda RX-8

1 Answer

Code P0410 what is the secondary air system and what can go wrong


The P0410 code refers to the emissions system. The AIR pump puts air to the exhaust to lower emissions. It takes in outside air and pumps it through two one-way check valves into each bank of the exhaust ( P0410 - Secondary Air Injection System Malfunction )

About 90% of the time that this code is set, the one-way check valves have worn out or failed and allow water (which occurs naturally in the exhaust) back into the pump. In any cold climate, especially in climates with higher humidity, this water may be more excessive. The water partially fills the AIR pump, it can then freeze. When the PCM commands the pump on, if the pump is frozen it cannot turn, thus overloading the circuit and "popping" the fuse.

Possibly symptoms include:
* MIL illumination obviously
* Hesitation on acceleration
* Noise from a bad/stuck AIR pump

Causes: A code P0410 may mean that one or more of the following has happened:
* Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump
* Blown AIR pump fuse due to freezing up

Possible Solutions:
Note: There is a technical service bulletin (TSB) regarding this code for a number of GM models. The TSB calls for the replacement of the AIR pump and the installation of a new secondary injection hose. The TSB can be found on this ACDelco site.

Additionally, if you simply replace the AIR pump the problem may return again (and again). If you replace the pump, also clean out the hoses and replace the one-way check valve. If this is on a GM model that the TSB applies to, follow those instructions in the link above. In a few cases, people have put a small hole in the rubber cover on the pump which allows any water to drain out.

Also, please note that this may be covered under the emissions warranty on the vehicle. If your vehicle is out of bumper-to-bumper warranty, check if the emissions warranty is still valid!
* Replace the AIR pump AND one-way check valve
* Test and clean the AIR pump AND test and replace the one-way air check valve
* Replace the AIR pump inlet hose
* Replace the AIR pump fuse (found under the hood)


Hope this helps (remember comment and to rate this answer).

Nov 16, 2010 | Chevrolet Lumina Cars & Trucks

2 Answers

Check engine light on, diagnostic code 0128 and 0410 keep coming up


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

P0410 - Secondary Air Injection System Malfunction
(has to do with exhaust system)

Note: There is a technical service bulletin (TSB) regarding code P0410 for a number of GM models. The TSB calls for the replacement of the AIR pump and the installation of a new secondary injection hose.

Oct 13, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

Mazda rx8 fault code p0410 secondary air system


Rx8 2004 check engine light it just teas on

Dec 11, 2008 | 2004 Mazda RX-8

1 Answer

Get diagnostic code of P0410


Secondary Air Intake System Fault code P0410 is set by a defective air injection pump, this pump is electric, on older cars it was called a "SMOG PUMP" and was belt driven by the engine. On cold start do you hear a hair dryer type noise from under the hood? if not the pump has failed, if you do the check valve is stuck closed, the only way to fix either issue is a new secondary air injection pump.

Aug 21, 2008 | Volvo XC70 Cars & Trucks

Not finding what you are looking for?
2004 Mazda RX-8 Logo

5,624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...