Question about 2000 Pontiac Grand Am GT

1 Answer

Engine exchange- GM3.4L V6

I have a 2000 3.4L V6 Automatic grand am. I want to exchange engine with a 2001 Oldsmobile Valero 3.4L V6 SFI OHV 112V. Will engine and trans bolts and electrical connections be the same?

Thanks.

Posted by on

  • deandrea537 Jun 05, 2009

    Hi Molson02536, I received the 2001 block. I will be installing this weekend.
    The 2001 3.4L block has no secondary air injector pump tubes. I studied this, and the pump only works for initial startup and is controlled by the PCM/vacumn. I will eliminate it, but I do not know if the PCM will fault without it connected. What do you think? I might just hook the pump up, and not the vacumn or tubes. Thanks.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Pontiac Master
  • 3,854 Answers

The engine is the same and should bolt right up to the transmission, the only thing is pay attention to the accessory mounts such as the location of the A/C and Alternator and power steering pump ect:
GM is know to make little changes to the accessory location between there brands. Good luck and hope this helps, keep me posted. Be glad to help if you have more questions.

Posted on Jun 03, 2009

  • Harvey N Tawatao
    Harvey N Tawatao Jun 05, 2009

    The PCM will set the check engine light, and you may have problems trying to get the car to pass the emission's test. The Air pump has alway's been a problem and known some people to eliminate it but they could not get the emission test sticker till they installed it back in. Check with your local emission inspection station in your area.

    It shouldn't be to hard to retrofit the air injector system to your new engine by transferring the exhaust manifold and a few other things.

    Keep me posted, and keep up the good work.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure switch on a 3.1


Here's a picture of your oil pressure switch,easy to replace,just disconnect electrical connector,get wrench and remove.It's located by oil filter,it's screwed into block. http://www.autozone.com/external-engine/oil-pressure-switch/duralast-oil-pressure-switch/chevrolet/malibu/2001/6-cylinders-j-3-1l-sfi-ohv/45356_652058_8537

Aug 02, 2015 | 2001 Chevrolet Chevrolet Malibu LS

1 Answer

How to change a water pump


Select the engine of your 1997 Plymouth Grand Voyager 2WD:
Available engines
4 Cylinders B 2.4L SFI DOHC
6 Cylinders 3 3.0L SFI
6 Cylinders R 3.3L SFI OHV

The VIN 8th digit will be "B", "3" or "R" as in the above table.

Dec 07, 2011 | 1997 Plymouth Grand Voyager

1 Answer

How can you tell what type of transmission is in my 1998 chevy malibu


Whether your Malibu is:
(a) 4 cylinder 2.4L SFI DOHC Vin "T", or
(b) 6 cylinder 3.1L SFI OHV Vin "M"

SFI = fuel injected
DOHC = dual overhead camshaft
OHV = overhead valves
Vin = 17-digit unique car identifier - the 8th digit identifies the engine (not the transmission), and
as you can see, your engine will be identified by the 8th digit = "T" or "M"

your car has the Chevrolet 4T40E automatic transmission (aka "automatic transaxle")
Here are some specifications:
archaeology.gif

Feb 18, 2011 | Chevrolet Malibu Cars & Trucks

2 Answers

What engine is the vin code m in a 1995 pontiac grand prix


  • 6 Cylinders M 3.1L SFI OHV (found in 92% of 1995 Pontiac Grand Prix)

  • Thanks!!

    Jan 02, 2011 | 1995 Pontiac Grand Prix

    1 Answer

    Where is the engine number located on a ford mustang engine 6cyl 2001?


    For 2001 Ford Mustang 3.8L SFI 6cyl engine, with which your specific vehicle is equipped, can be most easily identified by the Vehicle Identification Number (VIN), located on either the VIN tag, mounted in the upper left-hand corner of the instrument panel, or on the vehicle certification label, located on the driver-s side door pillar. The engine identifying code is the 8th digit of the VIN. The engine VIN codes are as follows:

    zjlimited_352.jpg

    FIG: Engine identification codes may also be found on a label affixed to the left side rocker arm cover

    4-3.8L SFI (OHV) engine N-4.0L SFI (SOHC) engine H-4.6L SFI (SOHC) engine V-4.6L SFI (DOHC) engine
    X-4.6L SFI (SOHC) engine

    Hope helps.

    Dec 29, 2010 | 1982 Ford Mustang

    1 Answer

    Where is the ECM located on the '94 Olds 88 Royale?


    For 1994 Oldsmobile 88 3.8L SFI OHV 6cyl the Engine Control Computer is located front seating area, passenger side, under dash, mounted above kick panel.

    Hope helps (remember to rate this).

    Nov 09, 2010 | 1994 Oldsmobile 88

    1 Answer

    Pvc valvue location


    For 1994 Oldsmobile Cutlass Ciera 3.1L SFI OHV 6cyl the PCV Valve is located: Under hood, center, upper engine area, mounted in rear valve cover

    Hope helps (remember to rated this and comment).

    Sep 14, 2010 | 1994 Oldsmobile Cutlass Ciera

    1 Answer

    Where is the fuel filter located on a 1995 Olds. 98?


    For 1995 Oldsmobile 98 3.8L SFI OHV 6cyl the Fuel Filter is located under vehicle, passenger side, below seating area, front of fuel tank, mounted on frame in fuel line

    Hope helps (remember rated and comment this).

    Aug 15, 2010 | 1995 Oldsmobile Ninety Eight

    1 Answer

    Where is the fuel pump relay located


    1994 Oldsmobile Cutlass Supreme 3.1L SFI OHV 6cyl the Relay - Fuel Pump is located under hood, passenger side, front engine area, rear of headlight housing, mounted in relay block on upper fenderwell.

    Remember rated this. Good luck.

    Aug 10, 2010 | 1994 Oldsmobile Cutlass Supreme

    1 Answer

    Knock sensor location for 2001 buick le saber


    If the engine is 3.8L SFI OHV the Knock sensor is located under hood, passenger side, front engine area, below exhaust manifold, mounted in engine block

    Mar 14, 2009 | 2001 Buick LeSabre

    Not finding what you are looking for?
    2000 Pontiac Grand Am GT Logo

    157 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...