Question about 2005 Dodge Charger

1 Answer

HOW TO PROGRAM A FOBIK KEY FOR 2008 DODGE CHARGER

Posted by on

  • yadayada
    yadayada May 11, 2010

    what is a "FOBIK" do u mean the keyless remote FOB?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 109 Answers

Your car came with 2 fobiks from the factory, if you bought a third one from Chrysler, read on, insert the first one in the win module, (key hole), and turn ignition to on only, watch your sentry red light to come on, wait till it goes out, you have ten seconds to insert the second one, red light will come on and start to blink, you have ten seconds to insert the third one , turn it to on and watch the red light to blink and once it stops and a chime will sound, the third fobik is now programed. If you only have one fobik, lost the other, your out of luck, you will have to visit a Chysler dealer. GOOD LUCK, RDJRP

Posted on Sep 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition key won't release even though shifter is in park position


2008: Problem removing key from ignition [Archive] - Dodge Charger ...

www.chargerforums.com > ... > Charger Problems/Assistance

Jul 18, 2008 - 16 posts - ‎9 authors
[Archive] 2008: Problem removing key from ignition Charger Problems/Assistance. ...It seems the key won't rotate all the way to its normal release point, which is ... Model LX - 300 ' LX - Magnum ' WK - Grand Cherokee ' LX ...

Ignition key won't release - Chrysler 300C Forum: 300C & SRT8 Forums

www.300cforums.com/forums/.../98878-ignition-key-wont-release.html
Jun 2, 2012 - Ignition key won't release ... 2008 Jeep Grand Cherokee 3ltr crd Overland. Boro al is ... If it's too short/long the ignition key is not released.

Key won't come out of ignition . . . - JK-Forum


Jan 05, 2016 | 2008 Jeep Grand Cherokee

1 Answer

Can'tprogram my new fob key on my dodge charger 2008.the alarmwill not blink in the process of programing


Is it a factory system? If so, the dealer can program it or figure out why it won't.

Jan 11, 2015 | 2008 Dodge Charger

1 Answer

FOBIK won't come out now car is locked and extra FOBIK won't open it.


Any tow truck driver, locksmith and alot of taxi drivers can open the door, Then you can pop your hood and give it a boost. I thought those Fobik things had a key locked into the back of it to unlock the door in a case where the battery went dead?

Jul 05, 2014 | 2008 Dodge Grand Caravan

1 Answer

My key/fob will open my car but it will not start not even a sound


It is most likely going to be a electrical problem on the printed board inside the key fobik. Take it to the dealership and see if they can try to re-program the key fobik and see if that works.

Sep 12, 2013 | 2005 Mercedes-Benz Mercedes Benz SLK350

1 Answer

Re program my key fobik for a 2011 grand Cherokee jeep


put program key in ignition turn ignition switch to on position engine off for 3 to 15 seconds.you should hear acoustic signal and immobilizer lamp will flash then turn off ignition switch.you need two program keys to do this procedure twice. with in sixty second insert non program key in the ignition switch turn to on position engine off for at least with ten minutes you should hear acoustic noise immobilizer lamp flashing turn off ignition switch if all failed the dealership have to use diagnostic equipment to reprogram ignition key or keys.

Oct 26, 2012 | 2011 Jeep Grand Cherokee

1 Answer

Can I program my replacement fob key without going to the dealer if I don't have an extra key


there are many shops who can program your key and much more easier if you have a working fob key already.If not it is good to take your car to the shop with the new fob key and they will do it for you,I believe with less money than the dealer. Ask and try it.

Sep 02, 2012 | 2008 Dodge Charger

1 Answer

My Key to my 2008 Dodge Charger gets stuck & you have to literally yank to get it out & shove to get it in. The ENGINE turns on & off, but the battery won't turn off. all the lights stay on....


Either you have had a new key made and it does not quite fit, or your key is worn, or your ignition tumbler is bad.
In either cases, this vehicle is new enough that your Dodge dealer can assist you in making a new key ect.
Please let me know what you find.

Feb 10, 2010 | 2008 Dodge Charger

2 Answers

How do you reset the oil change warning light on a 2008 Dodge Charger


hello. Here is what you do. Turn ignition to on (without starting car) then depress gas pedal 3 times, turn key off.

Oct 29, 2009 | 2008 Dodge Charger

Not finding what you are looking for?
2005 Dodge Charger Logo

5,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...