Question about 1994 Jeep Grand Cherokee

1 Answer

My car starts then it stalls after

We can start the car it stays on for a while then the spedlometer falls and turns of and back fires but only sometimes then i got to wait a while and started over and same thing happens again please help me

Posted by on

  • Richard Scordino May 11, 2010

    check coil wiring it may be loose

  • Richard Scordino May 11, 2010

    Your speedometer "falling" is the key to this. Info from the speed sensor is also supplied to the computer if there is no reference signal there the system won't operate properly. Have the speed sensor and attending wiring and module checked.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

What you are describing is a bad alt now if it tests ok then the voltage reg is inside the computer it can be taken to orielly,s and swaped for another. here,s what im saying it will run a while then you loose speedo and most other guages it will stall and wont crank. if this is not whats happening you might want to describe a little more detail. Ken

Posted on Aug 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intermittent stalling


Two - from experience
1. Your fuel filter is 98% clogged - something sloshes around and it goes to 100% clogged and your stop. When you stop, that last 2% falls to the bottom of the filter. You fire it up and get going - repeat.
2. Your coil pack is bad and or the wires. The coil gets hot - plastic expands - begins to arc - and you stop

1 is more likely I think, especially if the service engine light is not on.

Apr 13, 2013 | 1984 Volvo 240 Series

1 Answer

Starts but stalls right away


Have you checked your fuel pressure? Could be the fuel pressure regulator. Hard to say without a year and model of the jeep.

Nov 24, 2012 | Cars & Trucks

1 Answer

Truck stalled now wont start


When you jumped the car did the engine spin over any faster or did it stay The same??? If it spun faster then the next step is to see if it is getting fire to the cylinders

Aug 21, 2012 | 1998 Nissan Frontier

1 Answer

Why won't my miss fire?


Fuel injectors may be dirty.. or plugged. The car just sitting there may have caused the gas to go bad which may have given them a head start on plugging from the get go. Get some cleaner for it.
When the dash lights blink, is it unlike anything you've seen it do before?
check the detail :

http://www.xcardiag.com/search/?q=engine

May 16, 2012 | Cars & Trucks

1 Answer

Car won't start. turns over but stalls.


sounds like a fault in the theft deterrent
is the theft light on or flashing
you will need to have the scanned for codes

May 31, 2009 | 1997 Chevrolet Cavalier

1 Answer

My 2000 vw passat starts but keeps stalling


If it back fired it is possible the timing jump a tooth. If so, you'll have to have the timing sprockets placed back into the proper spots. Have your mechanic do this if it's needed. But in any case have the timing check first.

May 29, 2009 | 2000 Volkswagen Passat 4Motion

1 Answer

Wont stay running


This sounds like it is your ignition module not sending message o your computer letting know that the key is in the ignition and the car has been started. Replace the ignition module

May 20, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Engine stalls when stepping on gas pedal and will not idle on its own.


Have you checked the ignition timing? Maybe you need to turn the distributor to the left or right if you don't have the timing light gun

Oct 02, 2008 | 1990 Honda CRX

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...