Question about 1998 GMC Jimmy

3 Answers

My truck is stuck in 4-low and won't shift out of 4-low.

I have a 2000 chevy blazer 4x4, 4 door and it is stuck in 4-low. I ended getting stuck and put it in 4-low trying to get out and now i can't get it out of 4-low.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

The transfercase shift motor is stuck most likely will need to be replaced .

Posted on Jun 03, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Dude put it in nutrle and at a stop, hit the 2hi botton and you wont have a problem!

Posted on Jul 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Buy a jeep

Posted on Dec 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed to 4wheel drive low and I can't get it to change back to 2 wheel drive.


1999 Blazer. Thing's to check. 4x4 problem. There's an actuator pump under your battery plate. Make sure its in good shape and its working proper. Next check the cable that runs from the pump to the front transfer case. Then check the actuator switch on the front transfer case. Then check the vacuum lines from the front transfer case to the rear transfer case, that should be right under the drivers side door. There's also a actuator switch on the rear transfer case witch two vacuum lines run out of. Check them also, and last check your fluid level in your transfer case. Start from the beginning to the end. Don't forget to use your 4x4 every know and then to keep it up to power. Its not like the good old days. Where a pull of the lever on the floor engaged the 4x4. I hope this helps.

Apr 09, 2014 | 1999 Chevrolet Blazer

1 Answer

When push button for 4 wheel drive the front end want ingage and the button just keeps flashing


Have you tried putting it in Neutral, then selecting 4-low. That's what we have to do on our 2000 Chevy Blazer. Same with going from 4-low to 4-high or 4-low to 2 high. It will shift from 2-high to 4 high on the fly (not in Neutral) and back.

Dec 31, 2009 | 1996 Chevrolet K1500

1 Answer

I have a 1999 chevy blazer and its stuck in 4 wheel drive low


while on level ground, start truck, shift tranni to netural, step on brake, shift from 4 low to low hi either through lever or push button which ever one you have. problem solved.

Dec 28, 2009 | 1999 Chevrolet Blazer

1 Answer

2000 Chevy Blazer stuck in 4L


try putting in neutral then try shifting in to 2h

Aug 17, 2009 | 1999 Chevrolet Blazer

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

My truck is stuck in 4LO and it won't come out of 4LO.


Likely either a shifter position sensor, transmission position sensor, or a differential position sensor. Had same issue w/ my Montero and it ended up being one of the 5 sensors on the transfer case. It was pretty tough to get to, so replaced all 5. That fixed it.

Jul 16, 2017 | 1998 GMC Jimmy

2 Answers

1999 chev blazer 4x4 system


I have a 1999 chevy blazer that stuck in 4 wheel drive. How do you get it out.

Nov 23, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1998 GMC Jimmy Logo

1,824 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...