Question about 1999 Ford F150 Regular Cab

1 Answer

Truck will turn over, but not run, has new fuel filter

Where is the fuel pressure regulator on a 1999 f150 with the 5.4l v8?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 77 Answers

On the fuel rail above the driver's side valve cover. don't believe this is the cause of your no running problem.

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy silverauto quits running no fuel pressure. new fuel pump new filter. Can't figure it out


might be a bad fuel regulator.. or your fuel pump relay might be going bad.. and also where did u get your fuel pump from.. i ran into a problem where i had to replace a fuel pump 3 times before i finally got on that worked right..

Apr 29, 2012 | Chevrolet Cars & Trucks

1 Answer

I have a 1999 Toyota Camry it starts up and runs for a few seconds and dies right down. I've changed the fuel filter and it seems to run just a little bit longer. But it still will not keep running. A


Check your fuel pressure. It may be low, or losing pressure from a bad pressure regulator. A thorough test of your fuel system seems in order. (A pressure test can also detect a bad regulator, if it's done properly.)

Nov 12, 2011 | 1999 Toyota Camry

1 Answer

My 1999 crown vic is still not building fuel pressure. I've changed the fuel pump and fuel pump relay still not building enough pressure. What else can i try


check or replace fuel pressure regulator. symtoms are. lack of fuel pressure, excessive fuel pressure, black smoke and engine running rich, instant drop of fuel pressure, when turned off delay building back up sufficient fuel pressure. also be sure fuel filter is not plugged. check the filter first !!

Oct 24, 2011 | 1999 Ford Crown Victoria

1 Answer

I have a 1999 Chevrolet Suburban 1500, 350 V8, automatic. The engine cranks, starts and then immediately dies. Fuel pressure is low (about 50 psi) and decreases slowly after engine stops. Have already...


check the fuel system
pump, regulator, fuel pressure damper , return valve
when the key is on the system needs to be pressurized and maintain pressure, if you dont have this , recheck your fuel system
if everything is ok, than cranck the engine and look for injector fault

Nov 07, 2017 | 1999 Chevrolet K1500

2 Answers

Ford F150 engine backfiring, running/idling rough


I Have a 1999 ford f150 4.6 that back fires and is just running really ruff when idling alot of nack fire a sord of like a pulse going on what is my problem?

Apr 16, 2010 | Ford F-150 Cars & Trucks

2 Answers

Where is the fuel pressure regulator on a 99 gmc suburban 2500 7.4l v8


5.7L And 7.4L Engines
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Remove the upper manifold assembly.
    NOTE If the fuel pressure regulator is to be reinstalled, inspect the filter screen (if equipped) for contamination. If the filter screen is contaminated, replace the regulator.
  4. Disassemble the fuel pressure regulator snap ring retainer.
  5. Disassemble the regulator assembly and the O-rings.
  6. Discard the O-rings.

    0996b43f80205553.jpg Fig. Fuel pressure regulator
To install:
  1. Lubricate the new O-rings with clean engine oil.
  2. Install the backup O-ring, the large O-ring, the filter and the small O-ring.
  3. Assemble the regulator with the vacuum tube pointing down into the snap ring retainer.
  4. Install the upper manifold assembly.
  5. Connect the negative battery cable.
Good luck

Mar 02, 2010 | 1999 GMC Suburban

1 Answer

My 1999 GMC Sierra wont start. It has the 5.3l V8


Sounds like a security problem that is preventing starting. It will run for a few seconds and then die.

Jun 09, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...