Question about 1996 Dodge Ram 1500 Club Cab

1 Answer

No power to my fuel pump

Is there suposed to be power to my fuel pump?? or is it run by grounds??? i used a test light and have no power to the plug in to ght pump but i have power at the relay. and i have changed out the relay with the starter relay and still the same thing.can someone tell me what i may be looking for?? i need to get my fuel pump working plz help.

Posted by on

  • husband_dadd Jun 06, 2009

    the fuel pump its self is bad but i dont know how to check to see is its getting and power there??

  • billie ramos
    billie ramos May 11, 2010

    did you check the wires that go to the fuel pump?



    when you turn the key can you hear when it kicks on?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Theres a fuse under ur hood check it

Posted on Jul 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The engine will crank but will not start why?


Do you have any codes or an engine light on, in your dash board ? Have you checked for spark at your plugs ? There are many things that could cause a vehicle to not start. Bad camshaft/crankshaft sensors. Poor ground wiring. Defective spark plugs or wires/coils.

Nov 22, 2016 | 2004 GMC Envoy

3 Answers

How to check the fuel injuctors, on 2000 dodge durango, p0ssible no gas toplugs the reason it wont start


Check fuel line for pressure - there should be something like a bike tire valve on fuel line - press the inner part of it and see if gas spurts out hard. If so you have pressure , a working fuel pump, and gas is reaching the injectors.

Check out the igniter?

Oct 22, 2016 | 2000 Dodge Durango

2 Answers

2002 dodge ram 1500 4x4 4.7l Turns over but won't start put gas in the throttle body an it will start but shut right off getting gas to fuel rail An power to the injectors


It doesnt sound like you have sufficient fuel pressure can you hear the pump run? if so might be a pressure issue, if not probably pump

Apr 11, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

I need a diagram for a 2001 VW Cabrio relay. I thought number 6 was for the blinkers/hazards but it's not and its empty. 413 is in there and blinkers and hazards just stopped one day. I don't know if I...


A2Resource
a great vw resource site
25345733-zc0klvszlbpkidh1d23fhked-5-0_0.gif
Relays:
Num.Relay Arrangement and Pinout (with control number stamped on relay)
1A/C Relay (13 or 140)
1A/C Switch
2Radiator Cooling Fan
3Fan Switch High Speed
4Battery, Fuse 23
5A/C Clutch (via pressure and temperature switches)
6Main Fusebox Battery Power, Fuse 19
7Main Fusebox Ground
8Fresh Air Fan
2Rear Wiper Relay (72)
1Main Fusebox Ground
2Main Fusebox Run Power, Fuse 4
3Rear Wiper Motor
4Wipe/Wash Signal from Switch
3Digifant Control Unit (30 or 32), Motronic OBD1 Control Unit (109)
1Main Fusebox Ground
2Tachometer
3Main Fusebox Start/Run Power
4Main Fusebox Battery Power
5To ECU (relay ) (1990 G60, ABA/VR6 OBD1 only)
6To ECU and Engine Electronics
4Load Reduction Relay (18)
1From Ignition Switch Run Power
2To Main Fuse Box Run Power
3Main Fusebox Battery Power
4Main Fusebox Ground
5Low Coolant Level Control Unit (43)
1Main Fusebox Start/Run Power
2Low Coolant Level Sensor
3Coolant Temperature Sensor, Gauge
4Main Fusebox Ground
6Flashers (21)
1Main Fusebox Ground
2Flasher Output
3Flasher Input/Power
4X/6 (Trailer Light)
7Headlight Washer (33)
1Main Fusebox Ground (B/4 to C/3 to Ground)
2Headlight Washer Pump
3Headlight Switch Pin 56 (headlights) (B3 to D4 to light power)
4Main Fusebox Battery Power (B/5 to Y/2)
5Windshield Washer Pump (B/1 to B/2 to washer pump power)
8Wash/Wipe/Intermittent Relay (19 for standard relay, 99 for variable intermittent module)
1Main Fusebox Ground
2Intermittent Switch
3Main Fusebox Run Power, Fuse 5
4Park/Low Signal (ground when parked, positive when on low speed)
5Wiper Motor Low Speed Output
6Wash Switch (positive for front wash)
9Seat Belt Warning Control Unit (4 or 29)
1Main Fusebox Ground
2Seat Belt Switch
3Door Switch
4Seatbelt Light
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power
7Automatic Shoulder Belt Controller
9Radio/Lights Buzzer (36)
1Main Fusebox Ground (not used)
2A1/4 (Left Parking Lights)
3Vehicle Speed Sensor
4Seatbelt Light (not used)
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power (not used)
7A2/2 (Right Parking Lights)
10Fog Light Relay (110 for fog lights with low beam headlights only, 53 for parking light/high beam fog lights)
1Parking Light Power
2Headlight Switch Headlight Power (Low/High)
3Fog Light Switch Power, Fuse 10
4Main Fusebox Battery Power
5Main Fusebox Ground
6Low Beam Headlight Power
11Horn (53)
1Main Fusebox Start/Run Power
2To Horns
3Main Fusebox Ground
4From Horn Button
12Fuel Pump Relay (80, 67 or 167)
1Main Fusebox Starter Power (not used)
2Main Fusebox Start/Run Power
3To ECU (Fuel Pump )
4To Fuse 18, Fuel Pump, Oxygen Sensor Heater
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground (not used)
9M/4, U1/8, G2/5 (not used)
12Glow Plug Relay (102 or 104)
1Main Fusebox Starter Power
2Main Fusebox Start/Run Power
3Engine Temp Sender (preheat)
4Glow Plugs (Z1)To Fuse 18 (not used)
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground
9Water Separator, Glow Plug Light

remember to check out the website below for more help
http://www.xjamiex.com/mk2resource/electrical/CE2.html

Dec 30, 2014 | Cars & Trucks

3 Answers

I have a 2003 Buick Century replaced fuel pump, fuel pump relay fuel pump fuse is no power to the fuel pump what's wrong with the car? Pcm? Key switch where's the relay located


Pull the relay. Using a test light connected to ground probe the four pins in the fuse block. Two of them should have power. Connect the test light to power. Back probe the other two connectors. One should be grounded all the time, this is the power supply wire to the fuel pump. The other should be grounded when the key is turned to the run position and only for about 5 seconds.

Let me know what you find and I'll help you further.

Sep 13, 2014 | Cars & Trucks

1 Answer

I have a 03 Hyundai accent I just replaced the fuel pump I have no power to the fuel pump I've checked the fuses and the fuel pump relay it won't start I'm not sure what to do next


Do you have a test light? If not, go buy a cheap $5 test light-one with a lead to clip to a ground, and with a needle type probe.
Pull the fuel pump relay out of the terminals it is plugged into-you need to check if the power feed for the pump is still available at the relay. Clip the test light lead to a ground and touch the test probe to the positive battery post-to check that your ground is good- tester should light up. Now touch the probe to all of the terminals that the relay plugs into. One terminal should have power with key off. If no terminals have power, you have lost the power feed for the pump. Double check all your maxi fuses in the power distribution box. Either a maxi fuse or a fusible link will be the power feed for the fuel pump relay.
If the power feed is there at the relay, try a new relay. If still no pump, a shop will probably have to check your fuel pump circuit.
Did you check for power at the fuel tank while the key was held in crank? When the engine is cranking, the fuel pump wire should have power. When the key is turned to on, the fuel pump should have power for about 2 seconds, to pressurize the fuel system. Then when key is turned to crank or start, the fuel pump should stay on.

Sep 07, 2013 | Cars & Trucks

2 Answers

1997 F-250 no power to the fuel pump. The fuel pump works. The safety shut off is down but no power in any of the 2 wires to it. changing the fuel pump relay has no improvemnt.


Check the fuse block. Use a test light and don't rely on just looking at fuses. But if the main ignition control unit went bad, it will also cut the power to the fuel pump relay. Autozone will check the main control unit.

Aug 10, 2010 | Ford F-250 Cars & Trucks

3 Answers

1989 astro van turns over will not start seems not getting fuil gas tank full


#1 NEED TO VERIFY SPARK AT SPARK PLUGS # 2 CK FUEL PRESSURE AT SCHRADER VALVE ON FUEL RAIL ,,PRESSURE DEPENDS ON TYPE ENGINE ....IF NO SPARK AT SPARK PLUGS CHECK SPARK FROM COIL WIRE , IF NO SPARK AT COIL ,CHECK VOLTAGE TO IGNITION COIL SHOULD BE 12 VOLTS, IF NO VOLTAGE AT COIL ( KEY ON ) CHECK FUSES THEN IGHITION SWITCH. IF NO FUEL PRESSURE AND FUEL PUMP RUNS REPLACE PUMP .. CK VOLTAGE TO FUEL PUMP WHILE CRANKING . CK USING PUMP GROUND WIRE AT THE PUMP CONNECTOR THIS WILL PROVE GROUND ALSO. USE TEST LIGHT TO VERIFY

Aug 07, 2010 | 1989 Chevrolet Astro Cargo

1 Answer

96 ford f150 5 l engine, replaced pcm twice, replaced whole distributor, tested ecc and cps. Fuel pumps tested. Still won't get fire to plugs or run fuel pumps


ecc and fuel pump relays good? when the engine is turning over, does the ck engine light go out? if not the PCM isnt getting a crank sensor signal. Power and grounds all ok at pcm?

Oct 07, 2009 | 1996 Ford F150 Regular Cab

1 Answer

No power to my fuel pump on a 1996 dodge ram 1500


The power to the fuelpump comes from the ignition switch to the pump check for power (testlight lights up) with the testlight clip grounded at these locations.
to check the fuel pump it's self:
use a 20 foot long 18 gauge inline fused test wire from the positive battery post to the pump

Jun 03, 2009 | 1998 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...