Question about 1990 Toyota Pickup

1 Answer

Starting when warm

1990 toyota 22r-e when engine is warm the only way it will start is to hold pedal to the floor and crank on it for a while it smells like it is flooding out then it starts. the 2nd and 3rd spark plug are black but the 1st and 4th aren't that bad

Posted by on

  • c454ss02 Jun 03, 2009

    have not tested the fuel pressure but it seems to be getting plenty of gas i was thinking maybe bad injectors

  • yadayada
    yadayada May 11, 2010

    what is the fuel pressure when this happens?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Make sure that the 2nd and 3rd plugs are the right ones possably get all new plugs

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i start my 84 toyota truck 22r i notice white smoke coming out of the exhaust...


If your not overheating or losing coolant, its more than likely engine oil burning. If it is coolant related, possible blown head gasket.

Feb 26, 2014 | 1984 Toyota Pickup Deluxe

1 Answer

I have an issue with a 87 toyota pick up carburetor. Sometimes it doesnt want to start and sometimes it does a friend told me its that diaphram on the front of the carb with the 3 bolts but he could not...


Okay, your freind may be right, that part is called the accelerator pump, it is used for starting the truck, when you pump the gas to start it this pumps a few squirts of gas into the carb. what concerns me is that you hold the gas pedal to the floor to start it, most of the time an internal leaking carb floods the engine and holding the pedal down will let it start, a quick test would be to use a carb cleaner spray and before trying to start the truck hit the gas pedal and see if inside from the top of the carb look and see if you see a squirt of gas spray out, you will need some one to push the gas pedal or you can do it at the carb, if it squirts gas then the accelerator pump may be good and carb may be leaking and need rebuilding but if it doesnt squirt then its bad and then i want you to spray the carb cleaner into the carb and try to start the truck and if its due to the accel pump then after you spray into carb the truck should fire up and run without having to hold the pedal to the floor, if thats the case then replace accel pump if it still doesnt fire until you hold gas down then crab needs rebuilding . good day. hope this is helpful.

Apr 17, 2011 | 1987 Toyota Pickup

1 Answer

1990 22r runs hot changed radator and all hoses , themastat, water pump works and does not leak. what can i do next


assuming fan is working, check for blown head gasket. Remove radiator cap, make sure it's full, start engine, allow to warm up. Once thermostat is open, check for bubbles coming up in the radiator. Combustion products coming into the radiator indicate blown head gasket. If this is not it or you have more questions, please get back to me.

Oct 27, 2010 | 1990 Toyota Pickup

1 Answer

1990 toyota celica fuel problem. It appears to be flooding. When cranking, if it has been sitting for a while, it fires for just a second, and then dies. When the fuel pump is unplugged, and engine...


start with trying to start the car with your foot hard on gas pedal, all the way to the floor this will stop fuel flow on start up its called clear flood mode. as the engine starts to fire and run ease off the pedal until it idles, it may take some time to run smoothly. if it doesnt run or stalls after a short time and then will not run i would try a ECU engine control unit as it supplies the earth circuit to the injectors, may be thats whats holding them open or they are dribbling badly and require overhauling

Jun 22, 2010 | Toyota Celica Cars & Trucks

1 Answer

Will not start


if it cranks but don't start try holding pedal to floor until it starts or 30 sec.may be flooded if so this may git it going ....hoping

Mar 11, 2010 | 1990 Chevrolet Lumina

3 Answers

Engine crank but wont start


have u checked to see if theres any gas in the fuel tank

Feb 10, 2009 | 1994 Toyota Pickup

2 Answers

1986 toyota pick up


sounds just like when your Igniter goes out.

HAWK

Dec 12, 2008 | 1986 Toyota Pickup 4WD

4 Answers

Car shakes when trying to start and doesn't turn over


  1. hold gas pedal to floor while trying to start. do not pump pedal.
  2. holding pedal to floor is how you start a flooded f.i. engine

Nov 12, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
1990 Toyota Pickup Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...