Question about 2000 Daewoo Lanos

1 Answer

How to remove drivers door panel and window winder

How do i remove the drivers door panel on lanos as window has come off its runner

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • Paul Feb 19, 2011

    This answer has nothing to do with the Lanos! The real problem that the guy needed to sort out was how to remove the window winder handle - Still haven't found a good answer to this bit.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove internal door lining drivers side to get to internal power window winder


Usually two or three screws along bottom edge one behind all handles. Remove screws carefully pry panel loose away from door using caution not to damage the clips holding panel on might need a tool for this. I removed enough not to need tool. Have to pry all the way around panel, lift panel up off door by sliding it towards top of door. Disconnected all wire connections, to disconnect handle remove clip panel is off

Apr 03, 2015 | 2009 Hyundai i30 cw

1 Answer

How do i remove door panel to get window runner


The panel is usually a pop button type retainers holding the panel on, Obviously all screws will have to be removed ie; grab handle, internal door opening lever, and the window winder,
TIP remove window winder handle with a shoe lace or a lenght of thin material , it's a horseshoe shaped spring clip holding the winder handle on and pulling the shoe lace or material in the opposite direction of clip will easily remove clip (don't loose ) Good luck

Apr 10, 2010 | 2003 Nissan Se R

1 Answer

My hyundai lantra's driver side window has become stuck down and appears to have come off the runner, how do i get the interior panel off to replace the window onto the runner? Cant seem to get the window...


Hi,
the window winder handle has a spring "E" clip so you need to use a this blade and turn the handle till you can see one of the edges of the clip and then push the blade in against the edge of the clip to push it of. NOTE: the clip is under a little pressure so when it comes of it will try to flick of quickly so try to keep your hand around so to catch it.

Then its just the door panel clips which are around the edges of the door panel just pop these off with a good sized screw driver all the way around, some of them will be quite tight so you will need to use a little force.

When putting the window winder back on push the clip back on slightly but not all the way then push handle on slowly when it is all the way on give it a sharp bang so that the clip will lock back in place.

Hope this helps, let me know how you get on.

Jason

Apr 05, 2010 | 2000 Hyundai Elantra

1 Answer

How do I remove the drivers doo panel to get to


It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck

Jan 19, 2010 | 1997 Ford Explorer AWD

1 Answer

How to get driver door panel off 1998 ford expitdetion


It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if applicable ) etc . The majority panel are a pop snap on type . Remove the winder lever withthe aid of a shoe lace or thin piece of cloth material, The winder is retained by a horse-shoe shaped spring clip. .... Pull the shoe-lace/ material in the opposite direction of the winder retainer clip and it will easily come off, but it is a spring clip and may fly off so be careful. Good luck

Dec 13, 2009 | 1998 Ford Expedition

1 Answer

Can't remove manual window winder from my 2004 Grand Am


there is a clip behind the handle use a small flat head or a pick or you can pick up the tool at any parts store

Jul 22, 2009 | 2000 Daewoo Lanos

1 Answer

Front driver's door won't lock on my 1999 Daewoo Lanos SE


it is attached with a wire clip and there s a very affordable removal tool which slips behind the crank handle and pushes it out....it can be dug out with a hook scribe but a bit frustrating and can cause minor damage to the trim

Jul 01, 2009 | 2000 Daewoo Lanos

1 Answer

Remove a driver side door panel on a 2000 Toyota Limited 4 Runner


remove the screws that hold the inside door handle and clips behind the door panel

Jun 14, 2009 | 2000 Toyota Corolla

1 Answer

Unable to remove window winder and door handle to access the window mechanism


there is a small cleps is behind the window winder u have to remove it before
and there is a small scrow behaind a small blastic cap located behind the door handle u have to remove it

i hope it help dont forget to rating me plz thanx

Mar 15, 2009 | 2000 Daewoo Lanos

1 Answer

I need to remove the drivers internal door panel


Remove plastic studs from door closer. Unscrew three retaining screws. remove grab.
Unhook window winder retaining clip. Best done with small long-nose pliers. window winder retaining clip located inside plastic winder handle section. Will need to prise away winder handle from door slightly to expose clip. locate and gently pull clip from winder shaft.
unscrew door opener / lock assembly retaining screw.
gently prise lower trim retaining press studs from door. remove lower trim.
gently , from rear of door, pull upper trim from door and similtaniously prise upper trim press studs from door.
gently giggle door opener / lock assembly through upper trim . remove trim
gently with flat blade, peel off plastic dust sheeting.
access to inside off door is now possible.
Reassembly reverse of above

Cheers !

ozzy11

Feb 04, 2009 | 2001 Suzuki Swift

Not finding what you are looking for?
2000 Daewoo Lanos Logo

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...