Question about 2002 Chrysler Town & Country
I have the entire part (assembly) need to remove busted one and install new one, please help
Go to local auto glass shop or auto supply store. Order a new mirror (not expensive). Ask also for the proper adhesive.
Put on some thick gloves (use pliers if needed) and remove the old glass.
Remove old adhesive from the mirror frame.
Apply adhesive to frame
Put new part in place and hold for a few seconds (read adhesive instructions).
That is it.
Please rate if this helps give your direction.
Posted on Mar 14, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 14, 2010 | 2006 Scion xA
Steps to follow
1.Buy the replacement mirror, making sure that it is an exact match to your vehicle's make, model and year. You can order it through your dealership. If you'd like to save more money, you can order a mirror online or buy one from a junkyard or a salvage yard that sells auto parts.
2.Roll down your window and shut your vehicle off.
3.Disconnect the battery's negative cable. This is important, because there is a risk of electrocution if you do not perform this step.
4.Take off the interior door panel by using your pry tool to remove the trim pieces. Then use the screwdriver to remove the screws holding the panel in place. You may have to remove a corner trim piece before the door panel lifts off.
5.Unplug the wiring harness if you have power-controlled mirrors. If you have manual roll-down windows, skip this step.
6.Take out the mirror bolts with either a socket wrench or a nut driver, so that you can remove the entire mirror assembly from the car.
7.Separate the actual mirror from the mirror assembly. Use a torx driver to extract the screws, and then pry the plastic tabs on the backing until the two pieces separate.
8.Attach the new mirror to the assembly by snapping it onto the backing with the tabs.
9.Put the new mirror, attached to the backing, into the mirror assembly.
10.Reverse the steps to reinstall the entire mirror assembly back onto the vehicle.
Aug 18, 2010 | 1996 Ford Explorer
Jul 02, 2010 | 2006 Chevrolet Cobalt
Mar 04, 2010 | 2007 Chevrolet Tahoe
Dec 24, 2009 | 2006 Toyota Camry
Dec 22, 2009 | 2006 Toyota 4Runner
Jun 22, 2009 | 2001 Chevrolet Suburban
Jan 12, 2009 | Pontiac Grand Prix Cars & Trucks
313 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: