Question about 2006 Buick Lucerne
Remove and replace driver side door handle on a 2006 buick lucerne cxs.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My 2007 Buick Lucerne drivers
first purchase the door handle assembly then remove the door panel. make sure the window is up and reach in and disconnect the rods making a note of which one goes to which one. unbolt the door handle and remove. the new door handle may come with a new rubber seal for it. position over new handle and reinstall. make sure to search the door panel for hidden screws holding it on before you pop the clips.. hope this helps
Posted on Feb 05, 2011
You have to pull the interior door panel off, remove the two fastners that hold the exterior handle on....disconnect the two plastic clips for the lock rod....reinstall in reverse order.....have some metric sockets on hand and an extension.
Posted on Mar 26, 2009
There are 2 different engines that came in the Lucerne in 2006 and I am not sure which one the CXS had. In any case below are pictures of both engines as well as locations. If you have the 3.8 liter (6 cylinder) engine you can add coolant directly to the radiator in the spot marked "A". But on your regular fluid checks you want to make sure that where the "B" is marked that the overflow tank there has fluid up to the line that says "full". If you have the 4.6 liter (8 cylinder) engine the overflow tank and where you fill up the radiator are the same (location "A") so that is the location you would fill the radiator as well as check to make sure there is coolant to the "full" line on the tank on your regular fluid checks, When you look at the pictures below you will understand easier. I hope this helps and good luck.
Posted on Jun 15, 2011
The door panel is held on by some screws and a series of mounting clips. You need a trim tool to get behind the trim panel and gently coax the clips out of the door.------------ For complete procedure with details and diagrams, to remove inside door panel, click the link below:-- http://technoanswers.blogspot.com/2011/08/how-to-remove-front-door-panel-on-2007.html ------------- This will help.Thanks.Helpmech.
Posted on Aug 05, 2011
Tips for a great answer:
Oct 30, 2016 | 2010 Buick Lucerne
Aug 21, 2015 | 2006 Buick Lucerne
Aug 14, 2015 | 2007 Buick Lucerne CXS Sedan
Aug 08, 2015 | 2007 Buick Lucerne
Jul 15, 2015 | Cars & Trucks
Feb 05, 2011 | 2006 Buick Lucerne
1,244 people viewed this question
Usually answered in minutes!