Question about 1999 Pontiac Montana

1 Answer

Ck engine light on code po335 p1336 also location of sensor?

Getting code po335, p1336 on a 1998 mercury villager 3.0 which is a nissan v-6 engine also where is the sensor located? thank you

Posted by on

  • bay8 Jun 21, 2009

    need exact location of crankshaft sensor on 1998 mercury Villager 3.0 v6

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,846 Answers

P0335 and P0336 Engine crank sensor malfunction
To test this code, have a visual inspection of the location and wirings of the crank sensor. If the engine has a cam sensor, you might mistook it as the crank sensor (it is a good idea to contact ATS that can research this for you). Check the sensor wires for insulation making sure it is getting a voltage signal as shown in the wiring diagram. Sometimes, the wires itself is soaked with dirty oil causing the sensor to fail. If OK, check the engine timing belt system for any slack which can also cause the sensor to throw in the code. If all of these prove OK, remove the crank sensor and check it for resistance as compared to the standard specs. Lots of times, if the sensor probe end is contaminated with oil or cracked, this can only be revealed after the crank sensor is removed

Posted on Jun 02, 2009

  • yadayada
    yadayada Jun 02, 2009

    The crank sensor is on the front of engine, it is triggered of the crankshaft balanced

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix my Mercury Villager 2002 with random misfire?


How to Fix error code P0300 for random misfires on your car ...

diy-auto-repair.wonderhowto.com/.../fix-error-code-p0300-for-random-...
Oct 15, 2010 - How to Fix error code P0300 for random misfires on your car ... amisfire (code P0304) on a 1999 Mercury Villager 3.3L · How to Fix error code P0500 ... I reset my codes and it ran fine for a couple of days, then I started getting ...

(code P0305) on a 1999 Mercury Villager 3.3L - auto repair

diy-auto-repair.wonderhowto.com/.../troubleshoot-misfire-code-p0305-1...
Sep 7, 2010 - The vehicle is a '99 Mercury Village, 3.3L, with 150000 miles on it. The chief ... How to Fix error code P0300 for random misfires on your car ...

2000 Villager Misfire - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Mercury > Villager
May 24, 2010 - 2000 Villager Misfire Villager Car Forums. ... i was told that the 3.3L engines of 1999-2002 nissan quests/ mercury villagers are INTERFERENCE engines! ... Hope the following may help, and I will post if my last fix works. ... I have a 1999mercury villager that is showing a random multiple cylinder misfire ...

Rough Idle - 2000 Mercury Villager - RepairPal

repairpal.com > Questions > Mercury > Villager > 2000 Mercury Villager
Repair the code issue, because your Villager has OBD-II which is a very helpful Diagnostic system. Upvote (4) ... My 1999 Villager was running poorly; rough idle, lack of power at highway speeds and the engine problem light indicated random miss-fire, etc. I had new spark ... Have code po306 cylinder 6 misfire detected.

P0301 - OBD-II Trouble Code - RepairPal


Dec 17, 2015 | 2002 Mercury Villager

1 Answer

Knock sensor where is the nock snsor


it is buried in the engine. Do not change it even if you get a code. It is a passive sensor and will not affect the engine. $600 to change it and it won't run any better.
see villager quest site in yahoo group

Jan 31, 2012 | 1998 Mercury Villager

1 Answer

I have a 1998 Mercury Villager and when the engine gets hot it starts to stutter and run bad. We have changed just about everything on it. We did get a code for the knock sensor once but we haven't gotten...


do not ever change the knock sensor unless you have $600 to throw away for nothing. You need a new distributor. teh cam sensor is going. it's in the dist. & not serviceable.
Buy a Rich Porter reman on ebay for $200. They will run cold whent hey start to fail, tehn totally fail.

go here & join the group for free tech help

http://groups.yahoo.com/group/villagerquest/

Jan 07, 2011 | 1998 Mercury Villager

1 Answer

My 1998 Mercury villager van 6 cylinder 3.0eng keeps cutting off


it could be faulty fuel pump or coil pack transistor.

Dec 10, 2009 | 1998 Mercury Villager

3 Answers

How many oxygen censor in 1997 mercury villager van I have to change new one some one told me more than two censor problem is check engine light is on


I have a 1997 Mercury Villager with many miles. We get poor gas mileage. The check engine light is on. I want to replace the 02 sensor but cannot locate it on the engine. Is there a link with photo of physical location of the sensor and what are the steps to replace it?

Oct 19, 2009 | 1997 Mercury Villager

1 Answer

Location of knock sensor on 97 mercury villager


it's in the valley of the engine. Do not ever replace it even if you get a code. A knock sensor will NEVER casue a driveabiity problem. It only retards timing 6 degrees if it senses spark knock. It also sets a code if an engine mount is broken and the engine rocks up and down on acceleration.

go here for help

http://groups.yahoo.com/group/villagerquest/

Oct 01, 2009 | 1997 Mercury Villager

1 Answer

Code reader knock sensor where is it located 1998 mercury villager


According to the Haynes manual it is under the intake manifold, Upper and lower intake manifolds must be removed for access. If you go to Auto Zone, they have the sensor and can give you the step by step instructions to replacing the knock sensor with common tools. Good luck and hope this help.

Sep 02, 2009 | 1998 Mercury Villager

1 Answer

OBD malfunction indicator light status on stored diagnostic trouble codes po325, po335, p1336 . Car will not pass OBD test.


CODE PO325 - KNOCK SENSOR. CODE PO335 -CRANK SHAFT POSITION SENSOR. CODE PO336 - I DID NOT SEE CODE PO336.

Aug 28, 2009 | 1997 Nissan.5 Altima

4 Answers

Where is a knock sensor for 1998 Mercury Villager located?


Here is a image of it's location, I hope it helps.
8262b2e.jpg

May 18, 2009 | 1998 Mercury Villager

1 Answer

My 98 villager have check engine light on with code PO135. I replaced bank 1 senor 1. after driving little bit same code came back again. then I replaced thermostat (the metar was always low, now it is ok)...


go to this website where there are files that will help you diagnose your issue.

http://autos.groups.yahoo.com/group/villagerquest/

P0135 is for heater circuit portion of the oxygen sensor circuit, not the sensor itself. It would just mean it's not heating the sensor so it will just delay the sensor controlling fuel trim until a few minutes later.

Feb 23, 2009 | 1998 Mercury Villager

Not finding what you are looking for?
1999 Pontiac Montana Logo

1,762 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...