Question about 2001 Honda CR-V

1 Answer

Release Button For Glass Top of Hatch Isn't working

The button to release the glass portion of my tailgate, which you have to do to open the the bottom portion, isn't working. When I press it, it makes no clicking or noises of any kind and the glass remains perfectly still. Any solutions?

Posted by on

  • dabishop460 May 11, 2010

    Have you held the button down for 2 seconds? I had the same problem when I first got the vehicle until the salesman reminded me of this.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Most likely it is your either your fuse, switch or actuator (motor). I recommend you check them in that order.

Posted on Jun 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to release glass in tailgate on Jaguar X-type estate. The button on wiper does not work


the release switch has failed {common problem} remove the tailgate interior trim panel remove wiper arm etc undu large nut remove wiper motor/fixings disconnect the switch connector and remove the switch from the outside of the glass IF YOU ARE LUCKY if its siezed you have to be very carefull and drill down the side of the thread to release it {watch the glass}

Jul 24, 2017 | Jaguar X-Type Cars & Trucks

1 Answer

Hatchback window latch stuck on 2004 ford explorer limited


The hatch window is locked and unlocked by an electric motor on your remote. If your sure the button on the remote is working (make sure by trying another remote that's programmed for your vehicle) the problem lies in the motor or its fuse, most likely the motor or latch linkage is jammed. If you open the tailgate itself, you will need to remove the trim panel to access the glass hatch release from there. Remove the plug wires to the glass hatch and check for voltage when pressing the remote with a DC voltmeter. If no voltage and you're sure the remote is good, there is an open circuit or bad fuse. If there is voltage the motor is bad or jammed. Try these steps and let us know what happened.

Aug 14, 2014 | 2004 Ford Explorer

1 Answer

Rear hatch will not open sound like the motor works but will not relase latch


there's a plastic actuator inside the tailgate that probably broke or at least came loose. You have to crawl into the back and release it. I ended up having to cut a little piece of carpet in the middle on the top of the tailgate area. Right where it fastens. You can manually release the glass with a screwdriver at that point. To replace the actuator, you need to take off the entire tailgate trim and metal underneath that to get to it. It sounds like a pain but trust me, not having the back glass be able to open or the tailgate area is much worse. It takes about 45 minutes to fix. The actuators are less than $10

Aug 28, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

I have a '96 gmc jimmy and the rear hatch and the glass will not open the and i dont have the money to replace the glass


there's a plastic actuator inside the tailgate that probably broke or at least came loose. You have to crawl into the back and release it. I ended up having to cut a little piece of carpet in the middle on the top of the tailgate area. Right where it fastens. You can manually release the glass with a screwdriver at that point. To replace the actuator, you need to take off the entire tailgate trim and metal underneath that to get to it. It sounds like a pain but trust me, not having the back glass be able to open or the tailgate area is much worse. It takes about 45 minutes to fix. The actuators are less than $10

Jul 30, 2011 | 1996 GMC Jimmy

1 Answer

I have a 1996 GMC Jimmy that has a drop down tailgate (the glass lifts up and the tailgate drops down) I am unable to get the glass to release. When I push the release button on the dashboard you can hear...


You should be able to use the key to open the hatch and lift gate then simply take the panel off and check to see whats not working. I believe its a plastic tab in there that breaks.

Nov 09, 2010 | GMC Jimmy Cars & Trucks

2 Answers

Rear hatch will notopen


Rear Hatch Release/Lock Failure: How To Open The Glass
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad); lg.php?bannerid=137&campaignid=106&zoneid=16&loc=1&referer=http%3a%2f%2fwww.s10forum.com%2fforum%2fadmincp%2fopenx_config.php%3fdo%3dox_zones&cb=d809956913 After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in
your Blazer or Jimmy will eventually burn out. when it does, there is really no way to open
the glass and lower the tailgate. The dash push button won't work, the rear key lock will
not work, the inside tailgat handle will not work, and you can not remove the interior
tailgate panel to access the mechanism because the screws can only be reach when
the tailgate is down (awesome GM design feature). The only way to replace the burnt
out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the
back panel to reach the so-called manuel release. Others said they pulled back the glued
on carpet to search for it also.

Well if you don't want to hack up the tailgate panel or rip out your carpet,
here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle
where the latch is. There are no screws or bolts in that area, you can safely pull it back
about 2 inches. Then you'll have to stuck your finger in and push down the release bar.
See the 2 pictures below:
http://img.photobucket.com/albums/v2...z/IM000658.jpg
http://img.photobucket.com/albums/v2...z/IM000664.jpg
(No pictures allowed in this forum rolleyes.gif , oh well, click the links then)
The first pic is of the latch, it's the gold section.
The second pic shows what you need to push downward.
When you get your finger back there, you should be able to feel for the part that need to
be pushed down. When that part is pushed down, the glass has been unlocked.


Now that the glass is unlocked, it and the tailgate can be opened. Now you can remove the
interior tailgate panel, it has one screw on each side and easily lifts off.

The actuator that needs to be replaced costs $58 from the dealer, so if you don't want
to replace it yet, but still want to open the back, you can leave the panel off and just puch the
manuel release level. Here's the pic of the tailgate:
http://img.photobucket.com/albums/v2...z/IM000669.jpg
It's in the open section right below the latch, hows my fingure pushing it:
http://img.photobucket.com/albums/v2...z/IM000668.jpg

I haven't replaced my actuator yet, still trying to find it for cheaper than the dealer wants,
but hardly any part store guys know what the hell an actuator is

Nov 17, 2009 | 2001 GMC Jimmy

3 Answers

I cant open the glass on my back hatch any suggestions?


The glass hatch release handles fail all the time on these models (which is why the system was eliminated in 2009 models).

The glass hatch handle is $32 list from the dealer.

Removal and replacement requires a philips screwdriver and a 10mm socket and ratchet with extension.

Open the glass hatch by manually activating it through the access hole on the inside of the tailgate (small square panel covering it)

Remove the two philips screws and the one pop fastener holding the plastic trim on the back of the glass hatch handle area.

Remove the two 10mm nuts holding the handle on, unplug the wire and remove, noting the routing of the wiring on removal.

Reassemble in opposite order, being sure to route the wiring correctly.

Oct 29, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Can not oprn tail gate


Hello jhall 538...this is a common problem on the blazer. If you can hear the rod actuator working, then the actuator rod to latch rod connector has broken. It's plastic, and a poor GM design.
To get the rear hatch open you will need to manualy release it. It can be done by working as much of the plastic tailgate trim you can get loose, from around the top center of the gate, where the latch is. remove the 2 screws that hold the handle on and remove handle. Then pry as much as you need to access the c type latch, and release it by moving it... it's spring loaded and will only move one way. Haveing someone help you lift the hatch while you unlatch it from inside the vehicle helps. After you get the hatch up and the tailgate folded down, make sure the latch is locked in the open position.
The actuator can be repaired, i've done it several times. GM will try and sell you a complete new acutator, which is rather costly compared to the $8.00 piece of plastic you need. This is what it looks like...The little blue plastic piece on the end of the actuator is what you need.
Good luck and i hope this helps.


0b9204c.jpg

May 14, 2009 | 2001 Chevrolet Blazer

1 Answer

The rear hatch door won't open either with the remote or with the switch inside on the dash. As well, the hatch door handle won't open the door from inside.


After a while, the mechanism (actuator) that unlocks and releases the rear glass hatch in your Blazer or Jimmy will eventually burn out. when it does, there is really no way to open the glass and lower the tailgate.
The only way to replace the burnt out actuator is to open the tailgate which you can't because the actuator is burnt out.

I've read stories that even the dealers don't know what to do, some have even cut up the back panel to reach the so-called manuel release. Others said they pulled back the glued on carpet to search for it also. 

Well if you don't want to hack up the tailgate panel or rip out your carpet, here's the easy way to open the glass:

You just pull back the interior tailgate panel right above the bump in the middle where the latch is. There are no screws or bolts in that area, you can safely pull it back about 2 inches. Then you'll have to stuck your finger in and push down the release bar.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

When you get your finger back there, you should be able to feel for the part that need to be pushed down. When that part is pushed down, the glass has been unlocked.

Good luck and hope this helps, The actuator that needs to be replaced costs $58 from the dealer.

May 06, 2009 | 2005 Chevrolet Blazer

3 Answers

Estate tailgate glass release button


I had the same problem with 2005 estate it used to open when starting the engine but does not unlock at all. The problem is the the sensor on the glass tailgate handle where the wiper arms is. It will cost around £70 from Jagaur themselves as I have just got one.

Aug 30, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
2001 Honda CR-V Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...