Question about 2003 Chevrolet Suburban 2500

1 Answer

NOT GETTING ANY GAS TO ENGINE

DRIVING DOWN THE ROAD JUST DIED CHECKED AND REPLACED FUEL FILTER NOTHING CHECKED ALL FUSE'S REPLACED FUEL RELAY SWITCH NOTHING ABSOLUTLY NO FUEL TO THE ENGINE SPRAYED STARTER FLUID IN TRUCK CRANKED YOU THINK IT IS THE FUEL PUMP.

HELP IN TEXAS!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

It's either the fuel pump or your engine control unit. Try hot wiring the pump and see if it works. If it does you need a new brain.

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My 2004 Kia Optima died while I was driving down the road. there was no fire and no gas what do I do


Test crank/cam sensor. A failure here can kill spark AND tell ECU not to send fuel.

Mar 02, 2016 | Kia Cars & Trucks

1 Answer

Got an 86 full size bronco 302. Idles good. Get down the road a mile or two and it is like the gas peddle goes dead. There's nothing. HELP! Replaced both fuel pumps, cleaned fuel tank. Replaced filter and...


possible clogged catylitic convertor. if you loosen the engine pipe from the manjfold and drive the car [noisy exhaust} and you have full power back thats your problem

Oct 08, 2013 | Cars & Trucks

1 Answer

Ford Explorer died while driving.


yes fuel filter because you probably ran it out of gas you could have got the fuel pump to hot and burnt it up,(new Pump) do not know what year or model you have but may be relay or fuse as well (more info Please) !!

Aug 24, 2017 | Ford Explorer Cars & Trucks

1 Answer

I was driving down the road, when I stepped on the gas the van died and would not start. we cfhecked the fuel pump and gas is getting to the fron relay but not to the fuel injectors It will start if you...


Have the cam sensor checked.I very common problem on this van .The sensor is located on the passenger side of the engine in the middle by the thermostat housing and under the evap solenoid vacuum hoses.!

Jul 22, 2010 | 1999 Plymouth Voyager

3 Answers

Here is the scenario...I have a 2004 Pontiac Grand Am V6. I was driving down the road and pushed on the gas, the car started slowing down and I pulled off the road. The car then stalled out. No dummy...


The reason why your oil and battery light came on is because thats what shows up with the key in the on position..that has nothing do do with anything. I would get a test light or volt meter and test the wires connected to fuel pump. in most cases it can just be a bad connection...gm is known for that. and inline electric fuel pump will not work and is not safe. You need specific pressure comming from the fuel pump. and it will not be connecting to an inertia switch(a switch which shuts of in shock of an accident to cut off the fuel pump) its worth the money to get the fuel pump if thats what you need.
but check those wires and connector first

Jul 11, 2010 | 2004 Pontiac Grand Am

2 Answers

Sputters then dies


Most likely a lack of fuel, check the fuel filter first.

Aug 13, 2009 | 1988 Saab 900

1 Answer

92 Chevy Suburban Electrical Fuel System


Check fuel flter at fuel pick-up intank (looks like a small wire sock). Remove fuel filter and fitting at fuel rail. Blow out fuel lines w/about 35lbs air press. Ck electrical @ relay - should be 4 connectors - one is key on hot/one is always hot/one is ground and last is hot to fuel pump. Good Luck

May 03, 2009 | 2002 Chevrolet Suburban

1 Answer

92 Chevy Suburban Electrical Fuel System


I assume the fuel pump fuse is good?
The only time voltage will be sent to the fuel pump will be the first 2 to 3 seconds if the starter is not engaged. You will want to crank the engine over and check for voltage on the load side of the relay, circuit #30 at the relay.
Let me know after you check.
Regards,

Feb 22, 2009 | 1992 Chevrolet Suburban

1 Answer

Replaced fuel filter, now won't start


a cut off switch is almost never the problem just hummor me for a second and please check that the fuel filter is installed correctly not backwards then check the fuel pump fuse and relay if all good check for power at the pump and a good ground if all this is good then the pump need replacement

Oct 18, 2008 | 1998 Kia Sephia

Not finding what you are looking for?
Cars & Trucks Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...