At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
firing order is 18436572.
Find #1 and start from there. pop the cap to corectly determine the rotation cw or ccw. then wire accordingly. The cap should have a 1 marked on the cap. Drivers side front cylinder is 1 then 3, 5, 7 Passenger side is 2, 4, 6, 8
Good Luck.
SOUNDS LIKE A BAD DISTRIBUTOR CAP..REMOVE EACH WIRE ONE AT A TIME AND CHECK FOR CORROSION ON TERMINALS..IF YOU SEE ANY YOU WILL NEED A CAP,ROTOR AND IGNITION WIRES..ALSO CHECK BOTTOM OF IGNITION COIL FOR CRACKS..IF YOU SEE ANY, REPLACE IT..I HOPE THIS HELPS
make sure you get the right pump, you need to know your tank size. then take off your bed. you have i believe 6 bed bolts, disconnect tail lights (unplug from underneath) remove bed grounding strap 1 screw, remove bed with help. Disconnect wires, unscrew fuel pump, replace pump. Reverse order to replace bed. jim
×