Question about 2007 Hummer H3X

1 Answer

Hummer H3 ReProgram Garage Door Opener forOLD Genie

I have an old Genie Door Lift Garage Door Opener I changed Security Code and need to reprogram my Hummer. It will not reprogram according to the book. Help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 504 Answers

GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Posted on May 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reprogram the garage door opener in the car


Put the opener remote near the buttons for the car system, with the key on hold both the remote open button down and the desired button on the car down for about 1 minute, that should program the system.

Jun 25, 2016 | 2010 Acura RDX

1 Answer

Genie garage door op


There is a set button on garage door opener look at manual that is in the garage hanging. to make car and door work together you will need both manuals

May 16, 2014 | Lincoln MKX Cars & Trucks

2 Answers

Remote door opener


So, you get out your remote control to your garage door opener and, then get your owners manual to your new car. You need to follow the instructions from the manufacturer to be able to program the remote control to the car.

Ok, you have followed the instructions from the car manufacturer and you press the button for the garage door to go up.......and nothing happens. So, then you think you have missed a step on the programing. Well, what most instruction manuals leave out is the step from programing the car/truck/van to the garage door machine itself. On the back side of your garage door opener is a panel called the logic board. The logic board is the computer or brain of the machine. Most new garage door openers now are a mulit-code machine. By that, i mean it uses several signals each time you press the button on your remote control. This is for security, so your code can't be stolen by a code-grabber.

Now, comes the step of programing the vehicle to your garage door opener. Once you have followed the instructions of programing your vehicle, you now have to "teach" the car to the garage door opener. You will need some help doing this. You will have to get someone to press the button in your vehicle and hold it down, while someone else has to press the learn button on the back your your garage door opener mounted on the ceiling. The learn button on the back of your machine will be square if using a liftmaster machine. Craftsman, Liftmaster, Chamberlain are all the same. Their learn buttons are square, and usually are yellow, red/orange, or purple. If using a Genie, it has a button that says "learn button".

The person pushing the button on the machine will only have to push and release the learn button. DO NOT hold this button down. If you do, it erases all of the programing in the machine, and you have to re-program all the remote controls that you have. You will have to read my other hub to find out how to do that. You will probably say a few words you shouldn't either. :-) Programing the vehicle to the machine only takes a second, and when the machine accepts the code, the light bulb on the machine should flash for a brief moment, and you should hear audible click. Yep, it's that easy! I dont know why the auto makers leave that step out. Anyway, i hope this helps, and if you have any questions.. leave them in my comments and i will try to walk you through it. See the photo above and you will see the typical logic board...the square red/orange learn button is easy to see. Just remember to press and release

May 08, 2012 | 1995 Lincoln Town Car

1 Answer

NEED TO REPROGRAM MY GRARAGE DOOR OPENER IN2001 YUKON


on the back of the garage door opener itself you will see a small program button -- push this button and the little light should start to blink,,, while the light is flashing, go to your vehicle and push the garage door opening button,, this should program the system to know your vehicles signal.

c...

Feb 03, 2011 | 2001 GMC Yukon XL

1 Answer

Can not program visor mounted garage door opener. Help! Opener is a Genie, followed directions no dice.


GOTO HOMELINK.COM


THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.


PLEASE NOTE: MOST BUT NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.


You must read and follow the instructions very carefully.


After you program the visor you must then program the opener to accept the visor code. Press the learn/memory/program button then press and hold the visor button (within 20seconds) the next time you press the button the door should move.




HOPE THIS HELPS

Dec 20, 2010 | 2005 Chevrolet Corvette

1 Answer

I cant program my garage door opener


The process is simple but too lengthy to post here.


Goto homelink.com


They make the system and have very complete instructions you can download.


PLEASE NOTE: MOST but not ALL Brands / models of opener will work with this system.


Nov 27, 2010 | 2008 Hummer H3

1 Answer

How much will it cost to fix cylinder 2 misfire?


i don't know how match the cost, but it will he you, first change the position of the ignition coil to another coil also the spark plug, read the misfire code is it P032 or replace the code, if on cylinder 2 again appear the misfire check the compression, if ok go to electrical and check wires go and from to cylinder two coil to pcm, check the ground on #2 coil, if all this ok, see the difference reading by multi tester to coil reference if all good, reprogram your pcm, or replace if necessary

Aug 02, 2010 | 2006 Hummer H3

1 Answer

How do I train the garage door remote?


Find the learn button on your garage door opener head unit. Press and hold the button, the indicator light will usually glow for 30 seconds. Within the 30 seconds, press and hold the button on your hummer that you wish to operate the garage door. Release the button when the motor units lights blink, it has learned the code. If there are no lights, two clicks will be heard, that should do it.

Mar 06, 2010 | 2007 Hummer H3X

1 Answer

I changed the stereo in my 2007 h3 hummer and now it is locked how do i unlock it?


GM radios must be programmed to match the Vehicle identification number installed at the factory. Any GM dealer can reprogram this to work. Should cost half an hour labor. Get the price quote prior to service. I have done plenty.

Feb 24, 2010 | 2007 Hummer H3X

Not finding what you are looking for?
2007 Hummer H3X Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...