Question about 1999 Audi A6
I have a 1999 Audi A6. The aux fan that goes on when the car is first started works fine except it is VERY loud. Sounds like the motor bearings are bad. I know this is a common problem for this model. I would like to replace. It is in a tight location. Any advice/pictures/ youtube videos on the easiest way to replace would be greatly appreciated. Thank you in advance for your help.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The guage and fan speeds work on independant sensors. If you can remove the plastic engine cover and locate the "sending unit" for the gauge disconnect it and restart the engine. The gauge should remain cold and not move. If this is the case replace the sending unit. This should be a single wire sender located in the waterjacket of the intake manifold look in the area where the upper rad hose enters the intake.
Posted on Mar 21, 2009
Sounds like the gas presser valve or weak fuel pump. When it dose it again turn the switch on and leave it on for about 3 mins. and see if it will start. If it dose I would say the pump is weak.
Posted on Sep 23, 2009
Have you checked to see if there is spark at the plugs? If not, simply take out 1 plug (can be any one of them), connect the plug wire to it and just let the threads of the plug rest anywhere on the engine block. Have someone turn the motor over while you are looking at the gap on the spark plug. If your distributor is sending sufficient power, you should see a nice healthy spark! If no spark, then your problem is either bad coil, bad distributor, distributor cap, rotor, or ignition. But first things first, check to see if you are getting spark.
Posted on Mar 08, 2010
SOURCE: i want to replace a
The serpentine belt diagram for 1999 Audi A6 1.0 TDI:
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering
Posted on Nov 03, 2010
Testimonial: "Thank you very much the diagram was very helpful to me...."
Tips for a great answer:
Feb 25, 2015 | 2001 Audi A6
Mar 29, 2012 | 2001 Audi A6
Jun 21, 2011 | 2002 Audi A6
Apr 28, 2011 | 2000 Audi A6
Nov 03, 2010 | Audi A6 Cars & Trucks
Oct 16, 2010 | Audi A6 Cars & Trucks
Apr 07, 2017 | 1993 Mazda Protege
Apr 07, 2010 | 1999 Audi A6
Nov 25, 2009 | 2004 Audi A6
355 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: