Question about 2001 Nissan Sentra

2 Answers

Replacing the starter, it grinds and won't start the car.

What are the steps to replacing the starter in a 2001 Nissan Sentra? What do you have to remove? Where is it located, under the manifold?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

First thing you want to do is remove the positive battery terminal this will keep the starter wire from having current and possibly starting a fire from touching onto anything metal. second thing is to locate the starter (it is usually on the right side of the transmission housing beside the block and under the intake or plenum.remove the positive wire and plug if equipped. next find the appropriate wrench size and remove the bolts that hold the starter to the transmission.pull the starter out and replace it with a new one. reverse the procedure and there you go.don't forget to connect the positive wire back to the starter and battery.
starter first then battery.
good luck and have fun.
Peace!

Posted on Jun 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

Always you can search the web, especially Google (Image).
And Google Web.
If you can access the web it's very easy to learn how to fix, repair or overhaul your things (cars, trucks, components, etc.).

Just write your questions like below;
How to replace 2001 Nissan Sentra starter location?
then you'll find a lot of answers.


See the below RH side of the pic is the starter.

Replacing the starter, it grinds and won't start t - 02050604.jpg
See; this site,
http://fly.hiwaay.net/~langford/corvair/sentra.html


or

http://images.google.com/imgres?imgurl=http://www.car-stuff.com/images/part_image/mp-starter.jpg&imgrefurl=http://www.car-stuff.com/nissanstarter.htm&usg=__uvcfxJzCZDkxMT7pbFotU_mNLW4=&h=87&w=125&sz=3&hl=en&start=28&um=1&tbnid=Zh6NAA1HR4Cg2M:&tbnh=63&tbnw=90&prev=/images%3Fq%3DHow%2Bto%2Breplace%2B2001%2BNissan%2BSentra%2Bstarter%2Blocation%253F%26ndsp%3D20%26hl%3Den%26sa%3DN%26start%3D20%26um%3D1

http://www.car-stuff.com/nissanstarter.htm

See; And search the bottom site.
Graphics Used On The Auto Repair - About.com
Index To Illustrations.
http://autorepair.about.com/cs/generalinfo/l/blimgasian001.htm





Posted on Jun 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter makes grinding noise when starting car. Sometimes it does no engage to start the car. Have replaced the started twice in the last year on my 1996 Nissan Sentra GXE Auto Trans.


check the condition of the teeth on the ring gear of the engine. They can become burred and cause improper engagement of the starter pinion. Check the adjustment of the pinion action.

Sep 08, 2013 | 1996 Nissan Sentra

1 Answer

1995 Nissan Sentra stalled while driving, replaed air sensor, battery and starter, still won't start


Can you hear the starter cranking the engine over?

Have you checked for spark?

Have you checked for fuel pressure?

Feb 09, 2013 | 2001 Nissan Sentra

1 Answer

2001 nissan sentra neither one of my turn signal bulb are working tried replacing the bulbs that didn't work.also tried switching the pigtail that didn't work either any idea what the problem


I had this problem with my car. Is ur hazzard flasher working? if they are working and the turn signals are not working. Try replacing the hazzard light switch. If the hazzard are not working then the combination flasher unit is bad. its what controls the signals and flasher.

Nov 10, 2012 | 2001 Nissan Sentra

1 Answer

Where is the starter from a 2001 nissan sentra located


Where is the starter on my 2001 Nissan Sentra?
I have removed the air intake and the battery and everything on that side - I still can't find the starter!

starter-from-2001-nissan-sentra-located-egaepzix3gtklbgbk4gumph4-1-5.jpg

starter-from-2001-nissan-sentra-located-egaepzix3gtklbgbk4gumph4-1-14.jpg

May 22, 2012 | 2002 Nissan Sentra

1 Answer

Replacing a starter on a 1994 nissan sentra 1.6 .


please remove the battery terminal for safety purpose,remove the female terminal of the starter,remove the number !2mm bolt on the starter then remove the two bolt upper portion lower portion number 14mm bolt then pullout the starter from the transmission housing

Apr 02, 2011 | 1994 Nissan Sentra 4-Door

1 Answer

What could be causing the starters to go bad on my 2001 nissan sentra 2.0. this is my third on that i put on/


Depending on why you're replacing so many - if it's a grinding issue, bad flywheel. If it's just drawing power - a bad or undersized battery or bad cables will cause starters to go bad. Too small a battery or bad cables create resistance and starter has to work twice as hard.

Jan 18, 2011 | Nissan Sentra Cars & Trucks

1 Answer

Change rear bearing on a 2001 Nissan Sentra


Most newer cars have a bearing that is pressed in to the hub. In order to do the repair you should have to replace the entire hub. This is actually easier and cleaner because the bearings are lubed, sealed and pressed in the hub. They usually cost around $30 and should be available through your local parts store. In most cases the hub is held on by a large nut so I recommend that you make sure you have a socket that is large enough.

May 13, 2010 | 2001 Nissan Sentra

Not finding what you are looking for?
2001 Nissan Sentra Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...