Question about 1999 Mercury Mystique

1 Answer

Brakes sensors? need to replace the brakes but not sure if it has sensors. when i go to buy them the clerk asked if i had sensors on the brakes. i bought the car w/o an owners manual so i am not sure. any help would be greatly appreciated. thank you so much.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

Is he asking if you have anit-lock brake sensors or brake wear sensors?

I may have owners manual for this car. I'll check. If I do, I'll sell it for $5 plus $2 postage.

Posted on Jun 02, 2009

  • gerry bissi Jun 02, 2009

    I have 1999 Contour (Sister car to Mystique) and I have 1997 Mystique. Let me know. I have Wiring Diagram Manual too. ($10).

    By the wy, it should not make any difference whether you have anti-lock brakes or not. The brake pads and rotors are the same.


    Part Number


    Brake caliper anchor plate

    Front brake disc

    Outer brake pad

    Inner brake pad

    Brake caliper

    Wheel knuckle



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1999 Suzuki Esteem that is giving off the code P0340.Oreilly auto parts is telling me that my car has two separate sensors. Can someone please advise me. 1999 Suzuki Esteem 1.8L GLX Wagon.

why ask a clerk? that??
J18 engine has 2 key sensors,
CKP behind the flywheel (aaahhhcraaappppp)
CMP on rear of cam,
so what is 340,well the service manual is clear
why not ask it , NOT/clerks.
340 is CAM, or CMP sensor.
lucky you.
no pull transmissions!!

btw ,crank sensor sets DTC p0335

if not wanting to guess, and get rumors and lies.
ever see this?
posted 100s of times. the real deal.
just $4

Feb 15, 2017 | Suzuki Cars & Trucks

1 Answer

Replace lamplight on my HD61Z886 5/2005 61'

Buy the plug-in module for your car's headlight at an auto parts store like Pep Boys (auto zone, oreillys, etc) and ask the clerk to show you. They will walk with you out to your car and lift the hood and assist you.

Jul 02, 2016 | Cars & Trucks

1 Answer

2006 Ford F350 4wd dually. Had ABS light come on. Found rear brakes bad. Replaced roters, calipers, brakes, brake lines and all new seals in rear dif. Rebuilt front dif, new seals, new brakes, roters,...

It doesn't cost anything to ask a question at a ford dealership . I would call and just explain what's going on. That one has me stumped. Good luck !!

Oct 29, 2013 | 2006 Ford F 350 Super Duty

1 Answer

To buy brake pads they ask if it is a single or double overhead cam, how do I find out which one mine is?

Look from the outside of the driver window and take down the vin number and give that info to the parts store clerk and it will give them all the info they need

Jul 20, 2012 | 1990 Mazda Protege

2 Answers

Engine sputters on iddle.

The codes for the O2 sensors mean they are not providing the data expected by the computer. Sometimes this means there is a problem upstream in the engine.
If the engine is missfiring on one or more cylinders, it should set a code for those cylinders. Same thing with a vac leak.
But low fuel pressure would not normally set a code.
Depending on which sensors are setting codes, the catalytic converter could be faulty. Even a dirty air filter can cause problems with the O2 sensors.

Jul 04, 2012 | 2004 Cadillac Deville

1 Answer

Replace transmission fluid and rear axel fluid at what intervals . 2006 ford f-150 automatic RWD 5.4 l. 8 cylinder

I would sugggest you go to your parts store to buy the trany fluid and ask the clerk this same question. Since you are doing him a favor by buying fluid he will be more that happy to give you that info.

You can also check in your owners guide under maintaince.

Jun 21, 2010 | 2006 Ford F-150

1 Answer

Madza protege 1998 front brakes making grinding noise when brakes applied , changed brake pads last week

You would need to apply some adhesive to the back of the brake pads.
This is common practice regarding disc brakes.
Quite a few brands are sold in most autoparts stores, and you should ask the clerk to show you some disc-brake noise reduction adhesives.
Once you get one of these adhesives, jack up the car again, and remove those pads. Follow direction as written on the adhesive's package.

Dec 20, 2009 | 1998 Mazda Protege

1 Answer

All brake lights out at same time - bulbs okay

I had this problem on my 98. Turned out to be the brake switch which is located at the top of the brake pedal arm. I went to autozone and bought the switch (under $20) and the sales clerk actually put it in for me after I asked a couple of questions about the location of the switch ... easy solution for me (-;

Oct 01, 2009 | 1998 Ford Explorer

2 Answers

Car overheats occasionally

When you drive, the cars foward movement forces air through the radiator keeping the engine temperature in check. When you are idling at a stop you need a fan to do this.There is a heat sensing unit either on the engine block or the inlet on the radiator that activates the electric fan.Sounds like it may be the electric fan or the control circuit/sensor.Ask a parts clerk at any of the parts outlets to show you a picture of the sensor and the location on the car. You may be able to short out the connector with a paper clip or wire.If the fan comes on the sensor is the problem. If it does't it will be the fan or the wiring.

Nov 28, 2008 | 1997 Ford Probe

3 Answers


first make sure to ask if the cv joints or axels are new or rebuilt,
if they are rebuilt, make sure to have the ring close to the sensor inspect for posible crack on it, and on the brake light most of timesx they come with a wear sensor, make sure that sensor is been replaced, since here you are not explaning if you replace the brakes your self or a shop did it, you might explained but i did not see it or pay atention , any way make sure to doble check than the wear sensor for brakes is been replaced, since not all the auto repairs will do it, and finally i suspect than one of your calipers might be loose, just have your car take to a diferent auto repair than offer free brake inspection and have them check for posible loose calipers

Jun 21, 2008 | 2003 Volkswagen Passat

Not finding what you are looking for?
1999 Mercury Mystique Logo

Related Topics:

1,591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

78936 Answers


Level 3 Expert

5676 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides