Question about 2000 Plymouth Breeze

1 Answer

Engine isn't getting gas so it won't start.

I was driving down the road and something clicked and the engine died. Now it wont start and not getting gas at the valve in the of the engine. I think I hear the pump start when i turn the key. I've checked everything. Why won't it start?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Plymouth Master
  • 1,632 Answers

Can you see if it has any sparks ?

Posted on Jun 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 94 dodge 4x4 was losing power then died, what would it be


Is engine getting fuel ? Do you have spark at spark plugs ? How long ago did you change the fuel filter ? Did you just fill or add gas ? It might have been bad gasoline ( WATER IN SYSTEM )

Feb 10, 2014 | Cars & Trucks

1 Answer

I have a dodge durango 5.9L 2003 giving off codes P0456, P0700, P0441, P0562, and P0440....was driving down road car shut off and just clicks brand new battery, but won't start....I was told P9562 was...


Here is the list.
Code 440 and 441 are for a problem with the vent for the gas tank.
Code 456 is for a leak in the vent system for the tank.
The computer vents the gas tank to the vapor canister several times per hour while the engine is running.
Code 700 is a general fault with the transmission or the trans control module.
Code 562 is for low voltage which can involve the computer or the alternator or both.
The codes starting with 4 would probably not cause the engine to die.
The 700 code could point to a shift problem but again would probably not cause the engine to not start.
The 562 code would mean the electrical system is below 12 volts which could cause your symptoms, you would need to check battery voltage and the alternator output.
Some of this could be as simple as a bad connection at the battery or something as expensive as a faulty computer.

Jan 10, 2013 | Cars & Trucks

1 Answer

My Samurai wont start . It is getting gas to the carb and spark to the plugs. Was driving down the road and just died. Getting power everywhere. Starter turns but the motor just wont fire up.


I had a similar issue with my '86....driving home, made a left turn, and engine shut down. Coasted to a stop, and had a look under the hood. Cranked over fine, had gas, spark, but no go! After a tow home, and more in-depth investigating, turned out that the timing belt had broken! The older engine has no interference between valves and pistons, so installing a new belt got 'er going again for about $40. You can look down though the oil fill port or loosen the upper screws on the belt cover to confirm that the valves are/are not moving when the engine cranks.
mr_haney2u

Dec 19, 2010 | 1987 Suzuki Samurai

2 Answers

92 s-10 after engine warms wont accelerate


could be trash in fuel filter or around pickup screen in tank. While driving everything sticks to them like magnet when you shut off and it sits it all falls off to happen again when you start the vehicle again

Aug 04, 2009 | 1994 Chevrolet S-10

1 Answer

My 80 ford f150 v8 302 wont start up i


if this is a 1980 F150, emissionwiz is correct in saying it has a carburetor, if your engine runs on ether, you do not have fuel supply to the engine. Check fuel delivery at the front of carburetor, should be a line screwed into the carb, may be connected by a rubber hose, remove this line and crank engine, look to see fuel is gushing out of the line, if no fuel the pump is bad, check fuel lines back to pump for leaks, replace leaking lines if necessary. If you get fuel then your float inside the carb is stuck, and the carb will need some attention, hope this helps, let me know

May 30, 2009 | 1989 Ford F 150

1 Answer

My car turns but wont start has gas 1990 cadi deville


maybe ur fuel pump needs replacing. if fuel pump goes out no gas to egnition. or your fuel pump relay might have blown chech owners manual or relays.

May 05, 2009 | 1990 Cadillac Deville

3 Answers

'03 Alero engine ust died while driving down the road. Help?


  • see if you can hear the fuel pump click over when you turn it to start position! this may be a fuel pump?

Mar 27, 2009 | 2003 Oldsmobile Alero

Not finding what you are looking for?
2000 Plymouth Breeze Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...