Question about 1991 Jeep Wrangler

1 Answer

Where to look for the short that keeps blowing the fuse

My jeep suddenly stop while driving open the hood and found that the 30 amps egnation fuse blew replace it with a new one and about a minute later it blew again after installing the second new fuse i'm hearing the fuel pump but not getting any spark where do i have to look for the short?????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

There are a bunch of places it could be. Look for anywhere the wires go over, around or under the frame, trans bell housing. It could be a component that is bad causing a short also. I would look for a bad wire short to ground though as this is the most likely cause.

Posted on Jun 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 jeep grand Cherokee keeps blowing 20 amp fuse under the hood cranks but no start


A fuse that keeps blowing means you have a short. Inspect the wiring that goes to the fuel pump. It can also mean there that the pump is defective.

Jan 27, 2016 | Jeep Cars & Trucks

1 Answer

I have a 6200 and the Pto stopped working and the warning lights on the dash are constant.i have found that the fuse keeps blowing it's a 30 amp fuse which is a main one I think. Any ideas


Electric PTO. The motor is probably shorted. Easiest way to see is unplug it, put the fuse back in. If the fuse doesn't blow, replace the motor. If it does blow, trace the wires to the short in them.

Jul 04, 2015 | Cars & Trucks

1 Answer

What could it be when put auto in drive suddenly fuse blows under hood?


Which fuse is blowing? Look at a wiring diagram for that fuse circuit. If that fuse only controls one component, the component may be faulty or the wiring circuit has a problem.

If the fuse circuit controls several components, you may need to disconnect/reconnect components one at a time to try and see which component or wiring circuit is faulty. Hopefully when you unplug the faulty component, the fuse will no longer blow. It is possible that test would not be conclusive because every time you unplug something you lower the amp draw on the fuse.

Jun 06, 2015 | 1998 Jeep Cherokee Grand 2WD

1 Answer

Had a dead short at pos. bat terminal.. it smoked thats how i found it... fixed it but now no spark and no fuel... what happened??? turns over.. lights are bright but nothin...HELP ME PLEASE


In the power distribution center, black fuse box under the hood next to the battery, there is an "engine" fuse. Controls power from the battery to the computer and engine electrical systems. A battery short would very possibly blow this maxi fuse (30 amp?).

Mar 05, 2011 | 1998 Jeep Wrangler

1 Answer

2000 Jeep Cherokee #7 10 amp fuse


You will have to check the positive wire of the wires that go to the parking and side marker lights for a short to ground.Check the easy things first like the bulbs for these lights.It could just be a shorted bulb.You can remove one at a time and see when the fuse stops blowing.You an get a short finder from a part store and save the trouble of getting a bunch of fuses.Hope this helps.Good luck.

Mar 15, 2010 | 2000 Jeep Cherokee

4 Answers

Jeep keeps blowing auto shutdown fuse


Yes I had the same problem. The wires that plug into the sensor at the catatytic converter were rubbing against the drive shaft untill they finally wore through causing the short against drive shaft. repaired wires and it fixed everything

Aug 22, 2008 | 1996 Jeep Grand Cherokee

1 Answer

30 amp fuse under hood


if the fuse keeps blowing chances are that there is a short in the circuit. check the harness related to fuel system.

Aug 02, 2008 | 1996 Jeep Cherokee Sport

1 Answer

30 amp fuse/ in box under hood


The 30 amp fuse is most likely for your starter. Check that the red thick wire (could be black as well) leading to the starter and starter solenoid is properly attached and is not touching anything that would short it out and therefore blow the 30 amp fuse. The short may even be inside the starter in which case it will need to be replaced or repaired. Hope this helps.
Alex

Jul 09, 2008 | 1996 Jeep Cherokee Sport

Not finding what you are looking for?
1991 Jeep Wrangler Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...