Question about 1994 Ford Mustang

1 Answer

Im putting in the boss performance module

I need a diagram of where the iat sensor is on a 1994 mustang

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Please rate as problem solved if this is what you need.



Section 03-14: Engine Controls, Electronic 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Intake Air Temperature (IAT) Sensor Removal and Installation

  1. Disconnect battery ground cable (14301) .
  1. Disconnect engine control sensor wiring (12A581) from intake air temperature sensor (IAT sensor) (12A697) .
  1. Remove intake air temperature sensor from air cleaner outlet tube (9B659). (This is the tube that goes from the air cleaner to the engine.)
  1. To install, reverse Removal procedure. Tighten intake air temperature sensor securely.
--------------------------------------------------------------------------

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is iat sensor on 2006 toyota tacoma 4.ol 4door located ?


This is the 2001-2012 Toyota Tacoma wiring diagram, Toyota Tacoma IAT (Intake Air Temperature) Sensor Location and the Toyota Tacoma MAF (Mass Air Flow) Sensor Location, also included is a pinout of the sensor. You are likely installing a performance chip or a cold air intake kit for increased HP (Horsepower). You will want to be sure to disconnect the car battery before adding performance products.




Here is the Toyota Tacoma's Iat sensor diagram:




ab0b7213-0c7f-459c-b26e-77a685236e74.jpg

Apr 14, 2015 | 2006 Toyota Tacoma

1 Answer

1994 ford mustang v6 3.8l bank 1 and 2 system too lean


yes you have a clooged injector. you can try running a bunch of cleaner through it. also could be the iat sensor(intake air temp) if you put an aftermarket intake on make sure u use the iat on the new duct work. id do the cleaner and the iat sensor and that should be good also check for other vacume leaks from hoses and from egr valve

Mar 13, 2013 | Cars & Trucks

1 Answer

Need to wireing diagram for iat sensor


Vehicles: all computer-controlled internal compustions engines equipped with an IAT (Intake Air Temperature) sensor

Intake Air Temperature (IAT) Sensor

Operation - IAT

This sensor is a resistor based sensor which detects the intake air temperature. According to the intake air temperature reading the ECM/PCM will control the necessary amount of fuel injection.

ECM = Engine Control Module (aka "the car's computer")
PCM = Powertrain Control Module (aka "the car's computer")

Dec 04, 2011 | Cars & Trucks

1 Answer

I need to know where my MAF/IAT sensor wires are on my 2002 V6 ford mustang


it's the sensor on the intake air duct come out of your air filter. the iat sensor is integrated with the maf sensor

Mar 13, 2010 | 2002 Ford Mustang

3 Answers

Where is my IAT sensor located? Its a 1992 Mercury Capri non Turbo. I bought a Performance module and its splices into the two IAT wires. Is


Save your money and don't attach the module, it does not work. It only works during idle and after that the O2 and MAP sensors take over to control the air fuel ratio and timing. Take note that if there is a conflict with the program to your ecm's parameters, your engine will run under limp mode default which would result in less HP and performance. Good luck and if you need ore performance just spend the extra to have your car Dyno Turned. 

Sep 30, 2009 | 1992 Mercury Capri

2 Answers

Boss performance chip installation


sometimes the air temp sensor is in the mass air too.

Jul 10, 2009 | 2005 Chevrolet Avalanche

1 Answer

Cnt find iat sensor on 2005 chevy cobalt ss supercharged


The IAT sensor is most of the time located along the intake tube right after Between the throttle body and MAP sensor. Just follow your air intake tube from your air filter housing to the Throttle body.
Good luck. 

Apr 09, 2009 | 2005 Chevrolet Cobalt

1 Answer

Cant find the iat sensor on 91 s10


The IAT or MAT sensor (as equipped), is a thermistor (resistor which changes value based on temperature) mounted either in the air intake snorkel or the manifold (depending on the application).

Dec 25, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Ford Mustang Logo

Related Topics:

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...