Question about 1995 Dodge Ram

1 Answer

1997 dodge ram 1500 5.9L getting hot

I just put new heads on it's has a new rad, water pump and therostat and it's still getting

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

My best guess is your fan clutch has gone bad and your fan is slipping and turning too slow. I have a 1997 Dodge Ram 2500 van with the 5.9 liter engine and I just replaced my fan clutch a few days ago. It cost me about $60 since I did the work myself. If you plan on replacing it yourself I can give you fairly detailed instructions. Just post a comment here if you want the instructions and I will provide them in another comment.

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

01 dodge ram 1500 5.2L. Radiator was empty, filled it up and next day was empty too. No noticeable leak coming from under the truck (no puddles). I used anti-freeze and water from hose (well water) front...


it may only leak when driving..when the pressure increases. this leak could be internal as well as in a head gasket. fill it up and let it idle and get up to temp and check for leaks then.(never remove the rad cap from a hot engine)

Aug 05, 2013 | 2005 Dodge Ram 1500

1 Answer

1996 dodge ram overheating


Yes please check the pressure in your radiator, all so check all your hoses, make sure they are secured and no cracks or leaks!

Mar 06, 2013 | 1996 Dodge Ram

1 Answer

I have a 2000 dodge 1500 with a 318...started getting hot radiator , thermostat, and water pump was replaced and truck still gets hot any help?


you could have a sensor problem that needs replacing that controls the temp gage,if this isn`t the problem then you could have a head gasket starting to go bad.make sure there is nothing blocking the air flow in front of the rad.

Jun 08, 2011 | 2000 Dodge Ram 1500 Truck

2 Answers

My dodge ram 1500 is overheating and burning the coolant. I already changed my radiator and the thermostat, and it's not leaking but I can smell like burnt coolant, I have to be putting more cooling every...


I would defiantly check the water pump, can you feel pressure in the rad lines? when you changed the rad and thermostat out, did you run your vehicle without the rad cap for awhile to ensure that there was no air locks within the system?
Water pump is located at the front of the engine behind the fan.
Good Luck! hope this helps.

Sep 05, 2009 | 2004 Dodge Ram 1500

1 Answer

OVERHEATS IF SITTING STAYS OK COOL IF MOVING OVER 40 NO HEATER FA


you can check if the water pump is working by feeling the top rad hose , if it is hot it should circulate into the rad and the rad should be hot at the top and cool at the bottom if the pump is faulty there will be no circulation of hot coolant into the rad. I suspect your head gasket might be blown if you are getting pressure built up in the rad. in that case you will need a new gasket and have your head skimmed

Dec 23, 2008 | 1997 BMW 328

1 Answer

Heater problems


Did you bleed the air oout of the cooling system - Their is a bleeding next to the therostat housing.


1 - When the vehicle is cold remove the rad(tank) cap and top up the level if needed

2 - start the vehicle with the rad cap off and leave the car run until you can see that the therostat has openned(look in tank/rad) to see fuild flow then open the bleeder slowly to let any air out of the cooling system. Once you have coolant flowing out of the bleeder close the bleeder and install the rad/tank cap.

NOTE - Be careful with the engine running and hot Coolant.

You make need to bleeding system 2-3 time to get all the all out. Once all the air is out of the system you problem should be solved. If air returns to the coolant system have the system checked for possible head gasket leaking air into the coolant system

Nov 19, 2008 | 1997 Dodge Intrepid

2 Answers

Overheating dodge ram


dodge tends to run at about 200dg. i have a 97 with a 318 and this hs been its normal temp since it was new . if it is truly over heating and if the warepump is bad you shoul see water leaking from the bottom of pump . hope this is helpfull

Oct 29, 2008 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...