Question about 2006 Peugeot 405

1 Answer

How to remove bottom pully bolt 1.6 hdi 307 - 2006 Peugeot 405

Posted by on

  • yadayada
    yadayada May 11, 2010

    do u have a 1/2 drive impact gun and pressure air supply?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Peugeot Expert
  • 205 Answers

You need to peg the crankshaft near your gearbox. There is a hole in engine block for this purpose. Find this hole and insert an allen key (thick enough to fit in there). Turn the crank pully with ratchet in clockwise while try to find out the locking hole in crankshaft near gearbox by pushing allen key through engine block hole. You'll hear a click and the allen key goes fully inside. Now your crankshaft is locked and you can open (anticlockwise) the pully bolt.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean a 307 hdi 2 ltr , d p f filter


You plug the filter out and take it to a cleaning center, they have a special tool to clean these filters not something you can do only your own

Jan 11, 2015 | 2005 Peugeot 307 HDi

1 Answer

Remove peugeot 307 harmonic balancer


A Peugeot toyota. , is this an engine swap , question?
post to Peugeot forum?

no year stated. 307 is just a body, and means zero.

2001 to 2008? WHICH ENGINE??????
1.4 L ET3 I4 (petrol)
1.6 L TU5 I4 (petrol)
1.6 L DV6 HDi I4 (diesel)
2.0 L EW10 I4 (diesel)
2.0 L DW10 HDi I4 (diesel)

Jan 30, 2014 | 2005 Toyota Tundra SR5

1 Answer

I want a picture of an engine undercover for a peugeot 307 hdi rapier


try ebay adds, or join peugeot public service box and see the diagram

Apr 15, 2013 | Peugeot Cars & Trucks

1 Answer

ALTERNATOR REPLACEMENT


Assuming this is a XG 350, the process is lengthly.
1. Remove the RH radiator cooling fan (two 10mm bolts at the top & wiring harness connector to it).
2. Lift vehicle to remove the Right Front wheel (then remove 4 10mm bolts securing the plastic splash shield & remove it)
3. Loosen the 14mm nut on the alternator belt tensioner pully
4. Loosen the tension on the belt by rotating (counter-clockwise) the 14mm bolt at the bottom of the idler pully and remove the belt.
5. remove the pully & the idler pully (three 12 mm bolts)
6. Loosen the 14mm nuts at the top and bottom mounting points of the alternator.
7. Using a floor jack (or vehicle lift), support the engine using a jack-stand & 2x4 piece of wood under the oil pan.
8. This is tricky - lift the engine 'SLIGHTLY' to take pressure off the front engine mount - loosen the 17 mm nut on top of the mount itself and observe engine movement. If the engine moves upward 'slightly' remove the 17mm nut - if not, raise the engine slight more until you see the mounting bracket rise off the mount.
9. Remove the remaining 17mm nut (deep well socket), and two 17mm bolts and remove the engine mount bracket.
10. Here's another tricky step. Some 350's bottom Alternator bolt bores are 'SLOTTED'... some are NOT. You'll need to determine wether you'll need to REMOVE the lower bolt, or just loosen the mounting sleeve at the bottom bolt. If it's 'sleeved', I use an air hammer to loosen the sleeve. If it's not slotted, I remove the lower bolt (it's the only way to remove the alternator and pry it off).
11. At the top is an "L" bracket which uses two 12mm bolts to attach it to the engine (head). One of the two 12mm bolts is difficult to get to -- do your best to remove it because the battery cable to the alternator is in the way.
12. Disconnect the alternator wiring (battery cable & regulator harness connector)
13. Lift the engine as high as it will go & pry the alternator off its lower mounting.
14. manuver the alternator upward taking care not to damage the radiator.
15. Installation is in reverse order.
NOTE: If your XG's lower mounting point was slotted, your task is easy. If it isn't, your task now becomes more difficult as you must align the new alternator to facillitate re-insertion of the lower bolt.
PS If not slotted, I use a telliscoping magnet to help re-insert the lower bolt.

Aug 09, 2010 | 2004 Hyundai XG350

1 Answer

Injector for peugeot 307 hdi 1.4''


yes, and there are four injectors in peugeot 307 hdi 1.4.

May 01, 2010 | 2005 Peugeot 405

1 Answer

306 HDI has a terrible whining noise from the alternator end of the engine


needs a bottom pully, my advice is to get a suzuki grand vitara pully as it is the same as a hdi pully only its solid not bushed.

Apr 19, 2010 | 2005 Peugeot 405

1 Answer

Need to change pully


Which One?
60a96c9.jpg The one on the left has two 14mm fasteners 1 nut & 1 bolt. The one on the right has the same 1 14mm nut and 1 14mm bolt. Both are simple to replace. Step 1: Relieve the tension on the pully you wish to replace. Step 2: remove the pully (front) by removing the 14mm nut. To remove the rear tensioner pully, remove both nut & bolt.

May 19, 2009 | Hyundai Motor 2005 XG350

2 Answers

Carnt find diagnostic plug on car


see the headlight regulator on the driver's side. You'll then see a plastic Bolt. Turn 90 degree counter clockwise with a 2 Pence coin and open the Flap. Voilla the OBDII Plug is there.

May 11, 2009 | 2005 Peugeot 405

1 Answer

Having trouble getting water pump out of 94 lantra 1.8 lt


1. Remove the alternator & power steering pump drive belts.
2. Remove four (4) 10mm bolts holding the water pump pullys & remove the pullys.
3. Drain the Radiator (save coolant if intend to reuse).
4. Loosen & remove AC compressor belt.
5. Remove crankshaft pully (22mm bolt).
6. Remove lower timing belt cover (10 mm bolts) to access water pump bolts.
7. Remove the water pump (12mm bolts)
(1) Remove the 2 bolts, then remove the alternator brace (A). (2) Remove the water pump (B) and gasket.
dbb00ee.jpg ef0cc15.jpg 8. Clean mating surface on engine & install new gasket & pump - reassemble. Refill w/50-50 coolant.

Mar 21, 2009 | 2004 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...