Question about 1998 Chrysler Cirrus

1 Answer

Check engine is light up in the car dash.

1998 chrysler cirrus: all meters light up in the car dash, abs, alarm, the needles of the motor revolurtion, speed, gasoline and temperature do not work. we connect the scanner and it mark P1698. after look in book code it :No messege from CCD fro TCM. WHAT IS THIS AND HOW TO FIX IT.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Alright, with this code you have a problem in the wiring between the TCM and the PCM or the TCM itself is bad. CCD is the data bus the computers talk to each other on. For some reason the TCM isn't sending required data to the PCM. I would say if the wiring shows continuity and the connections are clean and tight, then you may need a new TCM. Fixes range from loose connections to replacing entire wire harnesses to bad TCMs. There also may be bad solder joints on the instrument cluster or replacing the cluster itself fixes it. When you check the connections for tightness, you may want to try cleaning the contacts with electrical contact cleaner which can be purchased at most auto part stores or Radio Shack even.

PCM = Powertrain Control Module <> It's a computer that controls engine functions <> Located on the drivers side fender wall outboard of the battery
TCM =Transmission Control Module <> A computer that controls transmission functions <> Located on the passenger side fender wall

Let me know if you have any further questions on this.


Posted on Jun 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can you change motor and trans in a 1998 chrysler cirrus from bottom of car or does it have to come out top

Dodge Automatic Transmission Removal - YouTube

? 11:05
Oct 27, 2010 - Uploaded by richpin06a
Dodge neon automatic transmission replacement. ... a chain block which means you have a lot more room under the car for working space to ... I didn't read the title and I thought I was watching how to change tranny oil. ... Then you can slid theengine a little to the pass side and you can pull the engine out.

Chrysler Cirrus Repair: Problems, Cost and Maintenance > Cars > Chrysler
A guide to problems, costs, maintenance and repair for your Chrysler Cirrus ... CheckEngine Light Due to Pinched Leak Detection Pump Vacuum Lines ... 1998 Chrysler Cirrus ... This is typically found where the wires pass under the distributor. ... The carturns over but won't start can't smell gas even when you keep ...

Nov 30, 2015 | Chrysler Cars & Trucks

1 Answer

Can the car alarm cause the battery in my chrysler cirrus to lose charge

if the head lights continue to flash of course the battery will go flat. every time the head lights flash there is 65 watts of power coming out of the battery. Have the alarm modulator checked out as it should only flash once or twice to indicate that the alarm is activated.

Dec 05, 2014 | 2000 Chrysler Cirrus

1 Answer

ABS light on a 1998 chrysler cirrus comes on only after the doors lock when driving down the street,why?

This is the short story.The transmission sends a signal to the ECM that sends a signal to the BCM (This is what locks the doors) The ECM also sends that signal to the ABS. When the ABS doesn't sense a signal from the wheel sensors, the ABS light comes on. Have the codes checked. Let me know. Randy

Sep 26, 2011 | 1998 Chrysler Cirrus

2 Answers

What makes a abs light come on in a 99 chrysler cirrus

There is a problem with the anti lock brake system. The best way to pin down the problem area is to check for codes.

Apr 12, 2011 | Chrysler Cirrus Cars & Trucks

1 Answer

My 1998 Chrysler Cirrus odometer is not illuminated what can cause this?

This could be caused by two things, the dimmer switch on the left hand side of the dash panel was accidentally turned off, or, the Inst. Illumination fuse under dash fuse panel is blown.
Don't forget to rate this post!!

Sep 30, 2010 | 1998 Chrysler Cirrus

1 Answer

Can't get sunrooff to close

Are the fuses good? With the car off and the interior light on, if you try to operate sunroof, does the light dim? If yes, motor is trying to work but stuck. If light stays the same then motor not getting power. Fuses, wiring, bad switch, loose connection. Have to play detective.
There's a small possibility that mechanical cables or pulleys broken stuck, or worn out. Sunroofs look simple but they are very complicated!

Mar 10, 2010 | 1998 Chrysler Cirrus

1 Answer

Disable alarm on 98 cirrus

how do i disarm an alarm on a 1998 chrysler cirrus?

Oct 23, 2009 | 1998 Chrysler Cirrus

1 Answer

1998 Chrysler Cirrus LXi refuses to start. Battery OK. Dash light diagnostic does not happen. Only Odometer and transmission position lights come on with key in ingition position. No click or any sound...

try the start sensor,that could be you problem,and another thing try to check the fuse panel too,the one inside the car and the one under the hood,good luck

Sep 15, 2009 | 1998 Chrysler Cirrus

2 Answers

Alarm red light stays on after you shut the car off 1998chrysler

I would turn the key on without starting the car then press and hold the black button till the alarm light flashes.Then turn key off take out of car and try the fob again.

Mar 29, 2009 | 1998 Chrysler Cirrus

1 Answer

ABS light on

I have the same problem. If you look at either wheel there should be like a gear. If basically pops off. However you cannot put it back on. You have to buy a new piece. You have to replace the whole drive axel if it is on your drivers side. I am not sure what happens if it is your passenger side. You have to replace all the transmission fluid. Buy a book. It helps a lot.

Mar 01, 2009 | 1998 Chrysler Cirrus

Not finding what you are looking for?
1998 Chrysler Cirrus Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides