Question about 1994 Jaguar XJ6

1 Answer

Glove box how to open glove box ??

Posted by on

  • yadayada
    yadayada May 11, 2010

    what does the owners manual say?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

1994 Jaguar XJ6 does not have a glove box, it has a passenger airbag instead. Do not mess with it, it might blow onto your face!
Regards, Jukka.

Posted on Jun 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change cabin filter


Open the glove box

Remove all of the contents in the glove box

On the right side, dis-engage the rod going to the split plastic pin on the glove box door

Squeeze both other sides of the glove box to defeat the stops that keeps the glove box from falling open

Observe the box in the area vacated by letting the glove box drop down, this is the heater box

Locate a rectangular cover (approx 7 " x 2"), it is located on the face of the box; facing you.

Pull this cover out towards you, the cabin air filter is located in the tray that is connected to this rectangular cover.

Jul 20, 2015 | 2001 Toyota Sequoia

1 Answer

Where is the cabin air filter on a 1996 Mazda B2500


Open the glove box

Remove all of the contents in the glove box

On the right side, dis-engage the rod going to the split plastic pin on the glove box door

Squeeze both other sides of the glove box to defeat the stops that keeps the glove box from falling open

Observe the box in the area vacated by letting the glove box drop down, this is the heater box

Locate a rectangular cover (approx 7 " x 2"), it is located on the face of the box; facing you.

Pull this cover out towards you, the cabin air filter is located in the tray that is connected to this rectangular cover.

May 06, 2015 | Mazda Cars & Trucks

1 Answer

HOW TO CHANGE THE IN CABIN FILTER ON A CHRYSLER 200


All of the older answers are incorrect. Open the glove box. Remove everything from the glove box and set it aside. On the right and left sides of the glove box, there are some rubber stoppers. Simply push inward on the sides of the glove box toward the center so that you can open the glove box beyond the point where the rubber stoppers stop it.

After opening the glove box all the way (past the rubber stoppers) look inside, just above the blower unit. There are arrows on the left and right end of a rectangular black cover. Push the release tabs which the arrows point to, and remove the cover. Pull the filter out.

Install the new filter, and put the cover back in place by snapping it on as you found it. Push the sides of the glove box toward the center, and close the glove box. Open it as you normally would, and put your stuff back in the glove box.

Sep 13, 2012 | 2009 Chrysler 300

1 Answer

Where is the computor located


Remove the glove box door. The PCM in a Grand Am is located behind the glove box. You do not need to remove the entire glove box, just the door. Remove the glove box by opening the door any emptying its contents. Squeeze together the outside part of the glove box that becomes visible while open. Squeezing it will release the clip from its fastener, and the glove box will slip right off.


Thanks
Tom Miller

Aug 21, 2012 | 2000 Pontiac Grand Am GT

1 Answer

Heater only run on high speed


Hello Sanda.

The blower speed system on your car goes through a resistor to give various speeds.
The reason it still works on high is that when set on high it doesn't go through that resistor.

It gets direct battery voltage.
The resistor is not too expensive and easy to replace.

To replace;
  1. Open the glove box.
  2. Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening, then roll the glove box downward.
kiltylake_143.gif
  1. Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the blower motor resistor from the resistor connector receptacle.
  2. Reach through the glove box opening to access and disconnect the blower motor pigtail wire connector from the resistor connector receptacle.
  3. Remove the two screws that secure the blower motor resistor to the evaporator housing.
  4. Remove the blower motor resistor from the evaporator housing.
There you are. Thank you for using FixYa.

KL

Jan 14, 2011 | 2001 Chrysler Town & Country

1 Answer

How do I change a blower motor in a chrysler Town and country


Hello, to change the blower motor resistor follow this steps:
  1. Disconnect and isolate the battery negative cable.
  2. Open the glove box.
  3. Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening, then roll the glove box downward.
  4. Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the blower motor resistor from the resistor connector receptacle.Blower motor Resistor
  5. Reach through the glove box opening to access and disconnect the blower motor pigtail wire connector from the resistor connector receptacle.
  6. Remove the two screws that secure the blower motor resistor to the evaporator housing.
  7. Remove the blower motor resistor from the evaporator housing.

Thanks

Aug 25, 2010 | 2006 Chrysler Town & Country

1 Answer

Well on my 300m the heater and a/c dont turn off even if i press the off button


If you have the automatic controls you'll need to replace the blower power module behind the glove box.

1) Disconnect and isolate the battery negative
cable.
(2) Open the glove box.
(3) Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening then roll the glove box downward.
(4) Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the power module from the module con-nector receptacle.
(5) Reach through the glove box opening to access and disconnect the blower motor pigtail wire connec-tor from the power module connector receptacle.
(6) Remove the two screws that secure the power module to the evaporator housing.
(7) Remove the power module from the evaporator
housing.

Jan 15, 2010 | 1999 Chrysler 300M

1 Answer

Lower Glove Box Won't Close


I fixed this in a 2010 Rav4 by lowering the glovebox all the way and finding that the cover to the cabin air filter had fallen off and was jamming the hinge of the glove box. To lower the glove box, pull the glove box side walls inward until the lock tabs clear the sides of the opening and you can rotate it all the way down. Clear whatever is jamming the hinge and rotate the glove box back into position. Be sure the hinge is pushed all the way forward onto the corresponding pin before closing the glove box, otherwise there will be misalignment. There is also a plastic air piston on the right side of the glove box assembly that damps the movement of the glove box. Be sure the piston assembly is secured into the two corresponding locking pins (one on the glove box, the other on the glove box opening) before closing the glove box.

Jul 08, 2009 | 2007 Toyota RAV4

1 Answer

Already have cabin filter, need to know how to install it.


Remove all of the contents in the glove box. Remove the glove box door support. Open the glove box. Squeeze the sides of the glove box inward, to drop the box door open further. The cabin air filter is in a small rectangular box, behind the glove box.

May 05, 2009 | 2004 Toyota Avalon

1 Answer

2000 Toyota Corolla VE -- Glove Box Stuck


The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.

Nov 02, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
1994 Jaguar XJ6 Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...