Question about 2000 Kia Sportage

1 Answer

Air conditioning belt

My belt broke i need to replace it but can not adjust pulley can you suggest how to do this Same thing - We got the right belt as specified but it just really seems too small - there seem to be 3 different belts on this 2000 kia sportage - no serpentine - and it is strange that the old belt would fit where the adjuster pulley was set at but even when the adjuster is moved to the highest point we can't get it on! :(

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You should seed a idler pulley..on the front you will see a nut that holds pulley on use a 10 mm rench the there's a 10 mm ajuster bolt lose this till belt fits left lose right tight.. after belt is tight then tighten nut in front of pulley.. if belt Sq weeks tighten some more..

Posted on Jul 20, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 19 Answers

SOURCE: bmw 330d serpentine belt fitting

Hey Andy a quick was to solve your problem is to locate a similar vehicle in a car yard, go have a look at the configuration and draw your self a quick diagram whilst your there.

Posted on Oct 04, 2008

  • 1 Answer

SOURCE: timing belt broke on 1998 kia sportage, need the correct points

Hi, Just to clarify and clear things up, the motor used in the 1998 to 2002 Kia Sportage is actually the Mazda FE3 engine and it is a NON-INTERFERENCE engine.

For any an all repair information on any Kia vehicle produced you can access the KGIS system (Kia Global Information System), just go to www.kiatechinfo.com and create and account (its completely FREE). After you do this you will have access to all the Kia Shop Manuals, DTC Manuals, Recall information for your vehicle and more.

I just had the same problem with my Sportage and found all the information that I needed through KGIS. Hope this helps and good luck on fixing your Sportage.

Posted on Jun 27, 2009

c17hydro
  • 2984 Answers

SOURCE: 1999 kia sportage timing marks

dfd3ea1.gif Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks
9f1c7ef.gif

  1. Align marks on camshaft pulleys with alignment marks on seal plate.
  2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
  3. Loosen tensioner lock bolt.
  4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
  5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
  6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
  7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
  8. NOTE: Replace tensioner spring if timing belt deflection is excessive.
Timing Belt Installation


eb770f2.gif
  1. Install lower timing belt cover.
  2. Install upper timing belt cover.
  3. Install power steering drive belt and adjust belt tension.
  4. Install fan pulley.
  5. Install generator drive belt and adjust belt tension.
  6. Install A/C drive belt and adjust belt tension.
  7. Install splash guard.
  8. Install fan and fan shroud.
  9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
  10. Install fan shroud mounting bolts.
  11. Install fresh air duct.
  12. Connect hose to resonance chamber.
  13. Connect battery negative cable.

Posted on Jul 26, 2009

  • 14036 Answers

SOURCE: 2005 Kia Sportage serpentine belt

YOU NEED THE BELT TENSIONER TOOL ITS FITS IN THE SQUARE SLOTS IN THE TENSIONER.YOU ROTATE TENSIONER CLOCKWISE TO REMOVE BELT.

Posted on Aug 23, 2009

c17hydro
  • 2984 Answers

SOURCE: the power steering belt is broke on a kia sportage

I would replace it yourself....very simple to do! The belt is $13.00 Power Steering Pump Belt

  1. Disconnect the negative battery cable.
  2. Remove the A/C and alternator drive belts for access.
  3. Loosen mounting lock bolt (A) and mounting bolt (B).
  4. With tension released removed the belt.
To install:
  1. Properly route drive belt around the pulleys.
  2. Carefully pry on the power steering pump using a suitable lever. Adjust belt tension is 22 ft. lbs. (30 Nm) when measured at deflection point shown.
  3. Retighten bolts (A) and (B) to 31 ft. lbs. (42 Nm).
  4. Reinstall the A/C and alternator drive belts.
  5. Connect the negative battery cable.
a30e7b7.jpg

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Expedition 2001 crankshaft sensor location and installation


  • Located front of engine, close to crank pulley
  • press the helpful button and follow me on Fixya for more tips
  • Insert the square tip of a 1/2-inch socket wrench into the square hole in the center of the serpentine belt's adjustment pulley. The adjustment pulley is the smallest pulley the belt wraps around.
  • Pull the adjustment pulley toward the engine with the socket wrench to release the tension on the serpentine belt, then pull the belt off the air conditioning compressor's pulley.
  • Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the side of the engine compartment. Do not disturb the hoses that attach to the compressor.
  • Pull the electrical connection off the crankshaft sensor.
  • Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine.
  • Slide the new crankshaft sensor into the engine, then install and tighten the sensor's two securing bolts with an open-end wrench.
  • Press the electrical connection onto the crankshaft sensor.
  • Position the air conditioning compressor against its mounting brackets, then install and tighten the compressor's bolts with an open-end wrench.
  • Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley. write up found @ehow

How to Replace the Crankshaft Sensor in Ford 150 eHow

Jan 28, 2016 | Ford Expedition Cars & Trucks

1 Answer

How do I locate the tensioner for the alternator belt on a 2003 kia spectra?


I wondered the same thing and looked for days on end. To my surprise, there is no tension pulley for the 2003 Kia Spectra. The Kia 4 cyl has two (2) belts. The outside belt services the power steering and air conditioning. The inside belt (the one you want to service) services the alternator and water pump. The alternator tension is set by two (2) adjustment screws located on the alternator. One screw is used as a locking bolt and the upper bolt is used as the adjuster. You must first loosen the locking bolt which is located between the belt and the alternator housing. Loosen about 6 to 8 travels of the wrench (size 13mm), then tighten the upper bolt until you have no more than 1/2 inch of movement in the belt when you press down. After the correct tension is achieved, tighten the locking bolt and your done. As long as you're down there, you might as well check the outer belt as well. Same principle, one locking and one adjuster. Good Luck, Fred

Feb 25, 2015 | 2003 Kia Spectra

1 Answer

Position of cam shaft censor in the ford f150


nstructions
    • 1

      Insert the square tip of a 1/2-inch socket wrench into the square hole in the center of the serpentine belt's adjustment pulley. The adjustment pulley is the smallest pulley the belt wraps around.

    • 2

      Pull the adjustment pulley toward the engine with the socket wrench to release the tension on the serpentine belt, then pull the belt off the air conditioningicon1.png compressor's pulley.

    • 3

      Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the side of the engine compartment. Do not disturb the hoses that attach to the compressor.

    • 4

      Pull the electrical connection off the crankshaft sensor.

    • 5

      Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine.

    • 6

      Slide the new crankshaft sensor into the engine, then install and tighten the sensor's two securing bolts with an open-end wrench.

    • 7

      Press the electrical connection onto the crankshaft sensor.

    • 8

      Position the air conditioning compressor against its mounting brackets, then install and tighten the compressor's bolts with an open-end wrench.

    • 9

      Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley.



Read more: How to Replace the Crankshaft Sensor in a Ford F-150 ' eHow.com http://www.ehow.com/how_6769823_replace-crankshaft-sensor-ford-f_150.html#ixzz2Ebai9Ftj

Dec 09, 2012 | 1998 Ford F150 Regular Cab

1 Answer

How to put a air condition belt a 1997 geo metro


there should be an adjustment bolt somewhere on the bracket. turn it one way it pulls the AC pulley towards the other pulley put the belt on then turn the adjustment bolt the opposite way and it will push it away and tighten the belt. you only want about an 1/8 inch play in the belt so the tighter the better

Jul 16, 2012 | 1997 Geo Metro

1 Answer

How do I replace the serpentine belt on a 1994 concorde?


Remove the alternator/power steering pump and water pump drive belt to gain access to the air conditioning drive belt.
To remove and install the air conditioning compressor drive belt, first loosen the tensioner pulley lock nut, then turn the adjusting screw to raise or lower the tensioner pulley assembly Accessory Drive - 3.3L Engine or Accessory Drive - 3.5L Engine To adjust the air conditioning drive belt, loosen the tensioner pulley nut and adjust belt tension by tightening adjusting screw. Torque pulley nut to 54 N•m (40 ft. lbs.) after adjustment.
The Poly-V generator/power steering belt has an adjustable tensioner pulley located on the timing belt cover Accessory Drive - 3.5L Engine to maintain proper belt tension. To remove or install this belt, Release tension by loosening the tensioner pulley nut and adjustment bolt Accessory Drive - 3.5L Engine Reverse procedure to install and tighten belt to specified tension.

Jul 10, 2012 | 1994 Chrysler Concorde

1 Answer

Locating tdc on ford ranger 2001 2.5 4cyl


Here are the instructions to replace the belt which are ones the same as the 2.3 earlier engine.
Getting Started
  • Remove the radiator shroud and loosen the water pump pulley bolts. Remove the accessory drive belts. Remove the water pump pulley bolts. Remove the water pump pulley and the radiator cooling fan. Drain and recover the Freon from the air-conditioning system. Remove the air-conditioning compressor.
    Remove the power steering pump but leave the lines attached and move aside. Remove the air conditioning bracket. Remove the crankshaft pulley bolt and the pulley using the wheel puller. Remove the timing belt cover.
Align Crankshaft and Block
  • Turn the crankshaft clockwise until the keyway on the crankshaft sprocket is straight up and the dot to the right side of it is lined up with the corresponding mark on the block. Check that the triangle mark on the camshaft sprocket lines up with the same type mark on the block at the 5 o'clock position. If not then turn the crankshaft one more time and it will align.
Loosen Tensioner
  • Loosen the large bolt on the top of the tensioner and then loosen the bolt closest to the tensioner pulley. Use the special ford tool and turn the tensioner clockwise to take the tension off of the timing belt and tighten the adjusting bolt lightly to hold it out of your way. Remove the timing belt.
Work Counterclockwise
  • Install the new timing belt starting on the right side and work counterclockwise. The circle on the crankshaft sprocket and the diamond marks on the oil pump and the triangle marks on the camshaft sprocket should always stay lined up. Loosen the adjuster bolt on the tensioner and rotate the engine two turns clockwise and realign the timing marks. Tighten the tensioner-adjusting bolt next to the tensioner pulley and then pivot bolt. Install the rest of the components in the reverse order that they were removed and tighten the crankshaft bolt to 121 foot-pounds of torque.

Jun 01, 2012 | Cars & Trucks

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

I have a broken belt that goes on the same pulley that another belt is already on. What all do I have to remove to be able to put the belt on. I guess the belt that needs put on is for the heat & air...


A/C Compressor Belt
  1. Remove the alternator/power steering and water pump drive belt to gain access to the air conditioning belt.

  2. Loosen the tensioner pulley locknut, then turn the adjusting screw to raise or lower the tensioner pulley assembly. Remove the belt.

To install:

  1. Install the belt.

  2. To adjust the belt, loosen the tensioner pulley nut and adjust the belt tension by tightening the adjusting screw. Tighten the pulley nut to 40 ft. lbs. (54 Nm) after adjustment.

  3. Install the alternator/power steering and water pump drive belt and adjust.

  4. Start the engine and check for proper belt alignment and any abnormal noise.

Nov 01, 2010 | 1995 Dodge Intrepid

1 Answer

Timing chain is loose how do I replace or tighten


You need to pull out the timing cover. 4-6 hours of work. Here is the step to remove the Cover, then you need to remove the Sprockets.
moz-screenshot.pngmoz-screenshot-1.png
  1. Remove the oil pan.
  2. Remove the power steering belt if so equipped.
  3. Remove the air conditioning belt, compressor and bracket if so equipped.
  4. Remove the fan clutch (fluid coupling), with the fan and water pump pulley.
  5. Matchmark and remove the crankshaft pulley(s). This bolt will be very tight. Use the counter-holding bar, properly installed, to hold the crankshaft while loosening the bolt. Use the pulley extractor or gear puller to remove the pulley from the shaft.
  6. Remove the water bypass pipe.
  7. Remove the fan belt adjusting bar. If necessary, remove the lower power steering bracket for access.
  8. Disconnect the heater water outlet pipe.
  9. Unbolt the timing chain cover assembly. Be careful to loosen only the correct bolts.

To install:
  1. Install new gaskets over the dowels on the timing chain cover. Slide the cover assembly over the dowels and pump spline. Insert the retaining bolts and tighten them. Tighten the 8mm bolts to 9 ft. lbs. (13 Nm) and the 10mm bolts to 29 ft. lbs. (39 Nm).
  2. Temporarily install the adjusting bar to the alternator. Install the adjusting bar to the chain cover and tighten the bolts to 9 ft. lbs. (13 Nm).
  3. Install the heater water outlet pipe.
  4. Install the water bypass pipe.
  5. Install the crankshaft pulley and bolt. Use the counter-holding tool to hold the pulley and tighten the bolt to 116 ft. lbs. (157 Nm). If equipped with air conditioning, install the second crankshaft pulley.
  6. Install the water pump pulley and fluid coupling with the fan.
  7. Adjust the tension on the drive belts.
  8. Install the air conditioning compressor bracket, compressor and belt if they were removed.
  9. Install the power steering belt and adjust it.
  10. Attach the oil pan.
  11. Install the radiator.

Jun 04, 2010 | 1987 Toyota Pickup

1 Answer

Belt came off 1998 chrysler sebring lxi


you have two belts . put the large belt on first . it goes around crank pulley air conditioning pulley alternator pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that it.

Mar 16, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2000 Kia Sportage Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...