Question about 1993 Ford Explorer Limited

1 Answer

1993 ford explorer

There is no spark in spark plugs put new coil pack still no spark Same problem with a 1994 explorer. When I 1st baught the car aout once per month the car would turn over fine but not start, Turning the key from off to on many times real fast would somtimes fix the problem. Eventually I couldnt get that car started at all. Replaced plugs and wires I can hear fuel pump kick on. ICM problem?

Posted by on

  • yadayada
    yadayada May 11, 2010

    what ignition system trouble codes do u have?? did u just guess on the coil?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

If you have fuel, replace the coil plate, you fried the diode in the coil plate causing it to not fire to test you need a spark plug detector light to see if your getting spark. If you just disconnect the wire and test it like the old spark plug system you will fry the coil or the diode in the plate, I forget what ford calls it, GM calls it a firing diode?? I think rusty memory.

Posted on Jun 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford explorer skiping


Have you checked the coil pack and module under the coil pack? It could be cracked or have debris around the connection.

May 27, 2013 | Cars & Trucks

1 Answer

1.3 1998 ford fiesta runs fine on tick over but missfires when under accelaration


usually a secondary ignition problem(coil pack, spark plug cables).

Apr 13, 2013 | Cars & Trucks

1 Answer

1993 Nissan 300zx: Number 4 cylinder doesnt fire.


Please read about misfire diagnosis and repair here.

Oct 01, 2012 | 1993 Nissan 300ZX

1 Answer

My engine is stalling and it shakes too much i put new spark plugs and wires and it stills run rought. what can it be?


what about the coil pack? If you changed wires and plugs you should also change the coil pack which controls spark to all the plugs. Make sure you put the right wires on the right plugs.

Jun 09, 2010 | 1997 Ford Explorer AWD

4 Answers

I have a ford explorer 99 but it's giving a error code PO306 what do u think it is


It sounds like a misfire. Check spark plugs 5 and 6. It could be bad fuel, bad plug wire, or weak coil. Check the fuel injectors as well. Other possible causes could be an egr valve stuck open, vacuum leaks, low fuel pressure.

Feb 17, 2010 | 1999 Ford Explorer

2 Answers

Missfire # 5 cyl before and after plugs and wires ?I changed some vacume hoses still same what to ck nexed


i had that happen plenty of times. be sure that the new plug isnt bad and ohm test or see if you haave spark on the new wire. good luck

Jan 07, 2010 | 2001 Ford Explorer Sport

1 Answer

Ford 4.0 all spark plug wires removed where do they go ?


Coil Pack
3 4
2 5
1 6

Engine Rear
3 6
2 5
1 4


Best I can do for Graphic detail, Now just connect the numbers with the wires.... PLay Dot to Dot so to speak.... in other words, connect 1 to 1, 2 to 2 ect.....

Sep 14, 2009 | 1993 Ford Explorer Limited

2 Answers

Cylinder 1 and 4 misfire on my 1997 Ford Explorer


The code description is a giveaway.
It could be one of the coils on the coil pack. Most coils nowadays do two cylinders each. This way car makers can get away with one coil for two cylinders.(lowers costs) One spark fires the air fuel mix in one of the cylinders and the other will fire the cylinder on the exhaust stroke. If the coils are removable, and you are fairly handy with cars,switch two around, the problem will follow the bad coil.

Dec 02, 2008 | 1997 Ford Explorer AWD

2 Answers

It back firing idls bad


are you sure the wires are in the correct order?

Nov 20, 2008 | 1993 Ford Explorer Limited

1 Answer

1993 ford explorer


HAVE YOU TESTED THE IGNITION MODULE, THEY HAVE BEEN KNOWN TO FAIL ON HI MILER TRUCKS AND CARS, ALSO MAKE SURE THE CHECK ENGINE LIGHT WORKS, IF IT DOES NOT THEN THE POWER TRAIN CONTROL MODULE EITHER HAS NO POWER TO IT OR THE MODULE IS BURNED OUT, THIS WILL CAUSE NO SPARK AS WELL

Oct 23, 2008 | 1993 Ford Explorer Limited

Not finding what you are looking for?
1993 Ford Explorer Limited Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...