Question about 1999 GMC Jimmy

1 Answer

I need directions to change my water pump

How to change the water pump from step one to finish

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 14,036 Answers

Drain engine coolant.relieve belt tension .and remove the drive belt.remove upper fan shroud.remove fan or fan and clutch assembly.remove water pump pulley and coolant hoses from water pump.remove water pump bolts.then remove pump from engine.pay attention to bolts location because they are different lenghts.clean water pump gasket mounting surface dont scratch .or pump gasket wont seal and leak .apply sealant to water pump bolts.install water pump with new gasket.if gasket paper put a sealant on it.torque water pump bolts to 30 ft lbs.if you got a 2.2L engine torque water pump bolts to 18 ft lbs.install coolant hoses on pump .install water pump pulley.install fan and fan clutch assembly.install the drive belt .and the upper fan shroud.fill the radiator with coolant.then run engine to check for leaks.WARNING AS A SAFETY PRECAUTION REMOVE NEGATIVE BATTERY CABLE SO CAR WONT BE CRANK BY ACCIDENT. ALSOOOO DONT FORGET TO TURN OFF RADIO FIRST BEFORE DISCONNECTING BATTERY SO YOU WONT LOSE YOUR RADIO CODE.

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a water pump on a 2004 ford taurus


Wanda, Check out the video and links I posted to see how to remove and replace Taurus water pump.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Install Water Pump Ford 3 0L V6 FWD WP 9038 AW4094
Ford Taurus Water pump Replacement
Need step by step water pump change
2004 Ford Taurus water pump Google Search

May 31, 2016 | 2004 Ford Taurus

1 Answer

How do i change a water pump on 2001 dodge intrepid?


This vehicle has a double overhead cam engine. The water pump is driven off the timing chain. Unless you have had experience doing internal engine repairs, this is not a DIYer job. There is great risk of doing more damage than good if any step(s) of the repair procedure are not done correctly.

Aug 30, 2014 | 2001 Dodge Intrepid

1 Answer

How to change water pump/timing belt on 2002 chrysler concorde lxi


I would recommend a shop manual or maybe a DIY book. There are important steps involving the hydraulic belt tensioner.

Sep 10, 2012 | 2002 Chrysler Concorde

1 Answer

What's the steps if changing water pump for a


I suggest getting the Haynes service manual for this vehicle. The number of steps needed to do this job are too numerous to list in the space available. If your engine is the 2.4L four cylindar, it is the same procedure used to change the timing belt. If you are going into the water pump on this engine, you may as well change the belt and tensioner pulley. If you do not have a well equipped garage, I would not attempt this job.

May 24, 2011 | 2002 Dodge Stratus

1 Answer

Where is the water pump


If you have the 5sfe 2.2 L engine, the water pump is in-line with the camshaft timing belt and is under a two piece plastic cover behind your alternator/powersteering/crankshaft pulley belts. Rule of thumb is to always change timing belt with the water pump. It's so much work to get to it, you might as well do both at the same time. You'll avoid having to go through all that twice if the belt slips or breaks later. Need advice on what to do exactly step by step? ask me directly. I'll tell you if I know.

Nov 22, 2010 | 1992 Toyota Tercel

1 Answer

Water pump went out. how do you reapir it?


Here's a video on a step by step replacement of your water pump.
http://www.wonderhowto.com/how-to/video/how-to-replace-a-water-pump-in-a-vehicle-102464/

You need to keep the belt diagram handy so you can replace it once you've finished with the water pump. Here are the belt diagrams for both engine sizes in 2002...

V6-3.4L

6034eba.jpg V6-3.8L
f6e483a.jpg

Nov 27, 2009 | 2002 Chevrolet Impala

2 Answers

How do you remove the water pump from a 2006 dodge grand caravan 3.3 v6


drain coolant loosen water pump pulley bolts, take off serpentine belt, finish removing pulley, unbolt water pump (5 bolts) and remove scrap off old gasket silicone new gasket to new water pump and reverse steps for installation

Oct 22, 2009 | 1996 Dodge Caravan

1 Answer

How to change water pump (1997 sonoma)


The text below is from the GM Service manual 4.3L V6 Engine
Water Pump Replacement (4.3L)
Removal Procedure
Drain the cooling system. Refer to Draining and Filling Cooling System .
Loosen the water pump pulley bolts.
Remove the cooling fan and clutch assembly.

Tools Required
J 46406 Fan Clutch Wrench

Removal Procedure
Remove the upper fan shroud.
Remove the fan clutch from the water pump in a counterclockwise direction using the J 46406 .
Remove the fan clutch assembly.
Remove the drive belt. Refer to Drive Belt Replacement Remove the water pump pulley mounting bolts.
Remove the water pump pulley.
Remove the radiator outlet hose clamp from the water pump.
Remove radiator outlet hose from the water pump.
Remove the water pump mounting bolts.
Remove the water pump from the engine.
Remove the water pump gaskets.
Clean the water pump gasket mating surfaces.
Installation Procedure
Install the water pump gaskets.
Install the water pump to the engine.
Apply a sealer (GM P/N 12346004) to the bolt threads.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Install the water pump mounting bolts.
Tighten
Tighten the mounting bolts to 41 N·m (30 lb ft).
Install the radiator outlet hose to the water pump.
Install the water pump pulley.
Install the water pump pulley bolts.
Tighten
Tighten the water pump pulley bolts to 25 N·m (18 lb ft).
Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.3L.
Install the fan clutch assembly.
Fill the radiator cooling system. Refer to Draining and Filling Cooling System .
Inspect the cooling system for leaks.

Oct 01, 2009 | 1997 GMC Sonoma

1 Answer

1995 buick lasabre-how do i change my water pump


I will provide you with a website that will provide with a website that will give you step by step directions on how to remove and install a Water Pump on your Buick!

  1. Go to THIS WEBSITE
  2. Then choose your vehicle
  3. Then go to THIS WEBSITE.
Thank you for using Fix Ya!

Hope this helps your out!

Feb 25, 2009 | 1995 Buick LeSabre

1 Answer

1993 grand marquis water pump


IF YOU PLAN TO DO THIS YOURSELF, IT'S A FAIRLY SIMPLE JOB, JUST TIME COMSUMING. FIRST THING BEFORE ANYTHING ELSE. BEG, BORROW, BUY OR WHATEVER A SHOP MANUAL ON THE 93 GRAND MARQUIS. CHILTONS OR HAYNES ARE GREAT, GET THEM AT ANY AUTO PARTS STORE. THEY SHOULD BE ABLE TO GET THEM IN TWO-THREE DAYS TOPS. THEN YOU'RE IN BUSINESS, BECAUSE THEY BOTH HAVE THE COMPLETE TEARDOWN AND REBUILD OF THE WATER PUMP WITH ALL THE TRICKS AND CHECKS TO DO IT RIGHT THE FIRST TIME! COST ABOUT $15.00, WORTH EVERY CENT IF YOU DO THINGS YOURSELF ON THE CAR. THE BOOK GIVES PICTURES AND STEP BY STEP INSTRUCTIONS ON EVERYTHING. YOU'LL LOVE IT AND FINISH THE JOB IN NO TIME AND HAVE IT RIGHT THE FIRST TIME. GO FOR IT! GOOD LUCK! IF YOU NEED MORE HELP,REPLY TO ARCLIGHT1217

Oct 29, 2008 | 1993 Mercury Grand Marquis

Not finding what you are looking for?
1999 GMC Jimmy Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...