Question about 1987 Suzuki Samurai

1 Answer

Need to ajust timing belt .we changed water pump and my son took belt and pully off

My son took belt off and bottom hub The timing is off.We had to change water pump

Posted by on

  • khouser887 Jun 01, 2009

    How to ajust the timing belt .My car wont run now the timing is off now

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 129 Answers

Take out #1 cylinder spark plug. make sure the piston head is at the very top of cylinder by moving the crank pulley by hand. When the piston is at the top check the crank, cam and any other pulley for little notches, these are your timing marks. Now position all the marks the same way as the crank, make sure they don't move. put the belt on and there you go.

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump on a 2001 caravan


3.0 timing belt driven, if a 3.3 or 3.8 serpentine belt driven,darin cooling system,remove serp belt,remove water pump pully & pry motor over to left while feeding the pully past the rt frame rail,unbolt water pump then reverse what you took off.

Oct 04, 2014 | 2001 Dodge Caravan

1 Answer

After changed a new water pump,timing belt,idler pully,tensioner for 2004 lexus ls 430, when start engine has a noise look like from pully


COULD BE A BAD BEARING IN THE IDLER PULLY OR THE TENSIONER ON THE TIMING BELT OR THE SERPENTINE BELT. IF ITS A SQUEEL IT MAY BE SOME COOLANT GOT ON THE SERPENTINE BELT. TRY TO WASH THE BELT WITH WATER AND LET DRY COMPLETELY. IF NOISE REMAINS RETURN TO THE SHOP THAT DID THE WORK.

Jul 17, 2012 | Lexus LS 430 Cars & Trucks

1 Answer

I need to install the belt back, I am working to install the water pump


Make Sure Your Adjusting is loose and your Belt correcly sitting on the Sleave From the Bottom of the Cranck Pully I See So Many People Re-ajust belt then When Star Engine Belt Broke ...So That Why I insist Sorry For That ... Then check all pully for belt sitting
Slowly Adjust Belt Till it Safe ..Then Turn Engine by Putting A extension Rachet then turn Main Crank Shaft Slowly Complite turn If the belt stay on correcly ..Then Start engine then stop Check again For Belt Position if it Ok ..Your car it fix ... Good Luck

Oct 07, 2010 | 2003 Toyota Camry

1 Answer

What are the steps to replace the water pump on 1996 lexus es300


Hi, you will need some special tool like : External torx (star)socket, pully and regular tool (# 10,12,14 etc..metric) to change the water pump. First, you need to clear the room for the job because such as Two belts -(alternator,air cond., pump ect and pully) need to disconnected and take out the plastic cover, tire e.t.c. There are about ten bolts. The water pump is inside the plastic cover which turns by the timing belt. I strongly recomment to change the timing belt at the same time ($30.00-timing belt- It last about 80000-90,000 miles). Remember to mark the timing gear carefully when you take the timing belt out. This will help you put the timing belt back in the right degree for the engine perform. Water pump can only replace after the timing belt is disconnected.
Take care

Aug 03, 2010 | 1996 Lexus ES 300

2 Answers

How many miles to replace 2000 honda accord LX V6 3.0


i am guessing that you are asking about replacing the timing belt on your honda .. if so then here is the replacement schedule

under normal driving 105,000 miles or 84 months
under extreme temp 60,000 miles or every 48 months (hot or cold climates)

its a good idea to change the water pump and tensioner pullies at the same time.. they dont add much to the parts cost ...

basic timing belt kit with pullies
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190353319317&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=f62ee3ec1220a0aad2853d85ffe453d8&rvr_id=&ua=WXI7&itemid=190353319317

kit with water pump and pullies
http://www.amazon.com/Timing-Belt-Honda-Accord-1998/dp/B003AXRV3S

its not a good idea to wait for belt failure. interference engines like yours will do a lot of damage if the belt fails.

Jul 02, 2010 | 2000 Honda Accord

1 Answer

How do you replace the water pump on a 2002 mazda 626 4cyl? does it interact with the timing belt?


hi from uk the 626 water pump is not driven by timing belt but by another drive belt so easy to change after removal of under wing cover to access /see pump b4 you remove drive belt would advise you to slacken off the water pump pully 1st while it is held by drive belt to prevent turning ? then with belt off /pully removed pump is more accessable hope this helps?

Dec 11, 2009 | 2002 Mazda 626

1 Answer

When you change the water pump on a 90 corola 4-door sedan are there alignment marks to get the cams back "in-time" or is there a trick to it?


If you removed the timing belt to fit the new water pump then you have to reset the timing on camshafts/and bottom pully and ... the bottom pully has a mark on gear and casing and the KEYWAY should be dead straight up. and the camshafts have timing marks on the gears and casing behind the cover..
Have fun

Oct 07, 2009 | 1990 Toyota Corolla

4 Answers

I have a high pitched noise which appears to be coming from front right engine compartment (as you are looking at the engine) which sounds kind of like a belt that is squealing. It is intermittent. Just...


Could be several things. WHICH ENGINE?.. 4 cylinder (has three belts, power steering/water pump, alternator & A/C compressor, one tensioner pully A/C compressor), The V6 2.7 (has only one belt, 1 Idler pully and 1 tensioner pully), the V6 3.5 has two belts - A/C/alternator, and power steering - there are two tensioner pullys). Noises can be caused by the belt(s) themselves, pullys, bearings, pully bearings, water pump shaft bearings (or belts/pullys rubbing up against something). Let's not forget that there is also belt(s) behind the Timing Belt cover as well as pullys and bearings associated with the timing system. You could start by removing one accy drive belt at a time (alternator, water pump, compressor, power steering, etc) to see whether or not the noise goes away in each case. If after each case, you discover the noise is still there, it's probably behind the timing belt cover (idler/tensioner pully, water pump shaft bearing, crankshaft bearing, etc.). Good Luck

Jun 29, 2009 | 2004 Hyundai Santa Fe

2 Answers

Pully wont spin after waterpump replacement


pull the water pump back off and see if something got wedged in there. your son might have dropped something in there before he put it on.

Apr 05, 2009 | 2003 Ford Taurus

1 Answer

How do I change the water pump on a '91 capri?


its pretty easy to do so all you have to do is remove both drive belts then unbolt the four bolts on the bottom pully. the double will then come off. remove the top and bottom timing covers in that order you will have to remove the water pump pully first. then mark your timing belt to ensure you get it back in time properly when reassembling. then loosen the timing belt tensenor pull timing belt off and let hang. then remove the water pump bolt then water pump. Install in reverse order. Make sure you clean the mating surface for the water pump.

Mar 16, 2009 | 1991 Mercury Capri

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...