Car will not start immobilizer will not turn off with fob
Lost both FOBS?
be happy, mine i must keep 3 working.... or cant make my own.
rule 1, never have 1 fob. or get stranded, , you will.....
so does other fob work?
1: check all fuses. both boxes
2: use only the key fob, no other keys on ring, for the test.
3: use the 2nd fob same way , now. with other key far away.
4: make sure battery voltage is 12.6vdc, 10.7v the IMMO goes belly up. (any $10 voltmeter , works)
5: have only 1 fob (transponder-key) near the ignition.
6: do not have other keys near Ignition switch. even just plain keys.
watch out, some after market keys are transponsers but look plain.
I have one for my car. button less fob. very trim, but is transponder key.
7: for sure not other transonder keys from other "cars or anything"
The Lamp means, your transponder key is dead. or scrambled.
buy a new battery for fob. the operator guide tells you what to do.
lost that?
on mine i put in a fresh coin cell and bam, it works.
on newer jeeps, if the IMMO thinks your are hacking the system.
it bricks the IMMO for 24hours, sucks huh?
for example, using a key from another car , in some odd way.
or doing same and battery is weak or remove from under hood.
it thinks its being attacked,, and goes stupid for 24hrs.
i dont think yours has this, , but mine does.
SOURCE: interference to RKE, immobilizer activates, cannot disarm immobil
Car Alarms: 1998 Grand Cherokee RKE, rke system, jeep dealership
Good luck let me know !!
SOURCE: my immobilizer will not disarm
when you say "the immobilizer will not go off" that mean you can still drive the car or not,when the immobilizer goes on you can start the car but will not run, so what do you need a spear key for .you may need the valet key, is a gray key .
I am professional car alarm and remote start installer so I deal with this kind of problems if you have any question email me
[email protected]
268 views
Usually answered in minutes!
×