Question about 1999 Chrysler Concorde

1 Answer

Suspension Had struts put in [front and rear] few month ago. Shruts were shot. Now when I'm driving over any bumps there is alot of rattling and vibration in the front. Very noisy. On the highway its worse. The sterring wheel vibrates and the car pulls to the right when I drive over any bumps. Scary and dangerous. Have two new front tires and 4 wheel aligment done. The noise in the front has getting worse each day since the struts were put on. I can feel the vibration on the gas pedal when driving over bumps on the highway. What can the problem be?

Posted by on

  • atorres39f Jun 01, 2009

    Other than not being properly tighten, can it be something else.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

The struts and shocks where not tightened properly take it back and have then tighten everything down to correct specs. But before you leave your hosue check your tire lug nuts and make sure they are tight so you can drive over there and like i said have them tighten everything

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suspension 1986 nissan 300z non-turbo. front end has had the ball joints, bearings struts, and brakes replaced recently and the rack in pinion replaced 14 months ago but the front end still sounds like...


How are the motor mounts? After all that work, you are down to only a few things it could be. good luck. Look for any bent suspension pieces. Does it have a sway bar up front? Check linkage and bushings on that.

Oct 27, 2011 | 1986 Nissan 300ZX

1 Answer

Front suspension noise-dull rattle-thumping sound,bumpy roads


look at the front lower engine mount. I had similar noise which has been driving me nuts, thought may be thesway bar links, put it on friends hoist and saw that the front engine mount (mounted to bottom of lower radiator support) was cracked and the rubber bushing inside very worn with pieces missing. odd thing is that reving, or putting into gear never caused it to make a noise, just certain bumps. I ordered part from Autozone,hopefully it gets here before the holiday week end is over.
Good luck

May 15, 2010 | 2005 Dodge Caravan

1 Answer

When i hit a bump it feels like it bottoms out . Do i need new shocks, shruts?? It just really smacks hard if I go over a bump or pot hole.


You could only need the Bump Stops that are rubber and prevent the shocks from hitting the chassis.

OR you may need shocks

OR just the strut bearing at the top of the strut if the struts are not leaking.

Apr 01, 2010 | 1992 Chevrolet Cavalier

2 Answers

1994 camry makes a rattling noise in rear suspension when i hit a bump and have already replaced struts and mounts and stablizer links


are you sure your exhaust aint rattling??ive seen people come in for suspension when its the exhaust,check the mounting bushings,and brackets

Dec 06, 2009 | 1994 Toyota Camry

2 Answers

Front driver side suspension knock over bumps


See if you can bounce car and replicate the noise. If you can, you should be able to find it, and put your hand on it. Stabilizer bushing are a place to look, both at the lower a arm and on the frame. If you narrow it down to the strut, it will need to be replaced. The front trans mount also goes bad, try putting it in drive with your foot on the brake and give it some gas and see if the engine moves an excessive amount.

Nov 23, 2009 | 1992 Buick Regal

1 Answer

Knocking sound when runing over the bump


2003 VOLVO XC70 2.5L 2521cc L5 FI Turbo (59) [B5254T2] : Suspension : Shock Absorber Price Core Total advice.gif SACHS Part # 554039 moreinfo.gif {Advantage}
Rear * Non-stock item--shipping delayed up to 2 business days $104.79 $0.00 $104.79 addtocart.gif SACHS Part # 554041 moreinfo.gif {Advantage}
Front; Strut * Non-stock item--shipping delayed up to 2 business days 2003 VOLVO XC70 2.5L 2521cc L5 FI Turbo (59) [B5254T2] : Suspension : Control Arm Bushing Price Core Total advice.gif üRO PARTS Part # 8630605 moreinfo.gif {Rear Position}
Front 8630605.jpg $7.62 $0.00 $7.62 Keep in mind there are 2 of each of these. These prices are from Rockauto.com anyone can order these at this price. $136.79 $0.00 $136.79

Jul 12, 2009 | 2003 Volvo XC70

1 Answer

Front suspension noises, bad new struts?


It sounds like the mechanic may have left the upper strut nut a bit loose, you may want to ask him to check it, but be nice, Toyota had some problems with upper strut mounts. These are on the top of the strut, they hold them to the body of the car. Unfortunately you have to remove and disassemble the struts to replace them. You could try asking your mechanic to just replace the one side and try it. I'm pretty sure that's your problem and he may give you a break since he's done all the other work. There is also a bulletin on a rattle from the side view mirror, but I think since this just started with the strut job, the mount is your most likely cause.
Google: toyota upper strut mount rattle

May 17, 2009 | 1997 Toyota RAV4

4 Answers

Strus or shocks in the front end of the magnum?


According to the replacement parts guide, they are struts and I checked for all wheel drive and 2 wheel drive and all are showing struts.

Apr 04, 2009 | 2005 Dodge Magnum

Not finding what you are looking for?
1999 Chrysler Concorde Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...