Question about 1994 Volkswagen Golf

1 Answer

Removal of head rests

I need to remove head rests from the front seat of a valkswagen golf 1994 model ?

The reason is that I want to fit new seat covers, and there are two holes in the top of the cover.

the head rest comes up so far then will not pull off.

Any help will be most gratefully received.

Thank you

Myles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,185 Answers

Look at the base of the headrest there is a small button which looks as if it is part of the moulding.

Pulls the headrest up as far as it will go then depress that button rock the headrest side to side as you press and it will come out

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove headrest from a Vauxhall Astra 1.6 sr 2009 so I can fit seat covers


Back head rest removal:
Use the push button on the right hand stem at the same time if you look at the left hand stem at the same place you will see a hidden button and you can press this with your finger nail.When you have worked this out press both and pull the h/rest out at the same time.
Front H/Rest removal:
First open the seat back at the bottom and lift up. Inside you will see a bowden cable (like a bike brake cable). Disconnect this cable.
Lift the H/Rest up to it`s full hight. At the seat top and at the point that the H/Rest stem goes into the seat twist the black plastic caps and lift up. -Sit at the back of the seat and poke the foam away from the front at about 11 o`clock when you look down you should see a small round silver metal ring. This is the end of a fancy clip that is used to lock the stem into place. You will need to poke a small screwdriver into this ring and move it about 2mm to the left.This has to be done on both stems at the same time and again lift the H/Rest up to get out. Best to get help with this as you will need a light to shine down to see the clip`s, pull the h/rest up and move both clips at the same time.Do not move or bend the clips more than a few mm or its knackerd. Lift the plastic caps and have a look before you start
The clip is a strait wire on this side that locks into a cut in the H/Rest stem when you pull the H/Rest up and if you bend it or force it to far you will have a problem fitting it back. remove-headrest-from-vauxhall-astra-1-6-duob1ufbnyqtgkjsieyballd-4-0.jpg http://www.vauxhall.co.uk/content/dam/Vauxhall/Europe/united_kingdom/nscwebsite/uk/Home/pdf/Owners_Services/owners_manuals/VX%20Astra-J,%20Astra-J%20GTC%20OM_TS%201680-A-13.pdf remove-headrest-from-vauxhall-astra-1-6-duob1ufbnyqtgkjsieyballd-4-2.jpg

Dec 13, 2014 | Seat Cars & Trucks

1 Answer

How do I remove the front head rests?


on top of the seat where the metal support rods go into the seat you will see a little clip like a plastic slide ,some push in and some models you pull back .have a look and you will see it

Feb 09, 2011 | 1994 Volkswagen Golf

1 Answer

How do you remove the drivers seat from a golf mk1


Shove the seat right forwards and inside the track,on the floor you will see a bolt head,just remove this,on both sides, push seat back and undo the fronts,seat will then lift out.replacement is a reverse of removal.fronts first.

Jan 11, 2011 | 1999 Volkswagen Golf

1 Answer

We need to remove the drives side head rest to install a seat cover, but we cannot figure out how to remove the head rest. How do you remove the driver's side head rest?


Head Restraints Removal
  1. Unscrew front seat head rest guide rod retainers (610A18) .
  1. Pull up on front seat back head restraint (611A08) . Compress foam in area of front seat head rest guide rod sleeves (610A16) .
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves .
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve .

    Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves .
  1. Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint .

9a4d433.gif

Aug 21, 2010 | 1998 Ford Taurus

1 Answer

How to fit a fuel pump in golf mark 3 cl


REMOVAL & INSTALLATION NOTE: On CIS systems the main fuel pump is located under the vehicle in front of the rear axle or in front of the tank on the right side. 1990–92 Cabriolet, Golf, Jetta and Fox TRANSFER PUMP
  1. Remove the rear seat and the access cover.
  2. Disconnect the wiring and hoses and unscrew the lock ring.
  3. Carefully lift out the pump and gauge sending unit assembly.
  4. When installing the assembly, use a new seal.
MAIN PUMP
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Raise and safely support the rear or right side of the vehicle on jack stands.
  4. Disconnect the wiring from the pump. Clean any dirt away from the fuel line fitting.
  5. Use locking pliers to pinch off the fuel line from the transfer pump to the main pump. If the fuel line is metal, remove the rear seat and access panel and disconnect the line at the transfer pump.
  6. Place a pan under the pump and disconnect the fuel line fitting from the pump.
  7. Remove the retaining ring screws and slide the pump out of the reservoir. To install:
  8. Moisten the pump O-ring with a little fuel and slide it into the reservoir. Install the retaining ring screws.
  9. When connecting the fittings, use new copper washers and tighten the fittings to 15 ft. lbs. (20 Nm).
1993–99 Cabrio, Golf, and Jetta
  1. Remove the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Relieve the fuel system pressure.
  4. Remove the rear seat and the access cover.
  5. Disconnect the wiring and hoses.
  6. Remove the fuel lines from the pump.
  7. On 1993–99 Golf, Jetta and Cabrio vehicles, unscrew the fuel pump retaining ring.
  8. On all other models, remove the mounting bolts and the fuel pump.
  9. Carefully lift out the pump and gauge sending unit assembly.
  10. Empty the fuel pump into an approved container. To install:
  11. Installation is the reverse of removal. Be sure to use new sealing rings and/or gaskets.
prev.gif next.gif

Aug 19, 2010 | 1993 Volkswagen Golf

1 Answer

1994 BMW head rest


there should be a sliding button just where the pole of the headrest goes into the seat, just push this , and the headrest should come out

Jul 26, 2009 | 1994 Volkswagen Golf

1 Answer

How do you remove the headrest on a 1996 ford crown victoria?


Head Restraints Each front seat is equipped with dual-post design front seat back head restraint (611A08). The front seat back head restraint is installed as follows:
  • It travels on dual posts which have notches to engage a spring-loaded catch in the guide.
  • The front seat back spring assembly retains the front seat head rest guide rod sleeve (610A16).
  • The front seat back head restraint is adjustable from its normal position to a raised position of approximately 25 mm (1 inch).
  • Pull up on the front seat back head restraint to raise it. Pushing down will return it to its normal position.
----------------------------------------------------------------------------------------------

Removal
  1. Unscrew front seat head rest guide rod retainers (610A18).
  1. Pull up on front seat back head restraint (611A08). Compress foam in area of front seat head rest guide rod sleeves (610A16).
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves.
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve.

    Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint.

Mar 01, 2009 | 1996 Ford Crown Victoria

1 Answer

FIT SEAT BELT


TO GET AT REPEATER LAMP ON O/S MIRROR ON A GOLF TDI SE 2004 REMOVE THE TOP COWLING AND THE GLASS NEXT TWO SCREWS AT THE BOTTOM TO REMOVE THE LAMP NO BULB BUT FIT NEW LAMP

Jun 20, 2008 | 2004 Volkswagen Golf

Not finding what you are looking for?
1994 Volkswagen Golf Logo

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...