Question about 1998 Isuzu Rodeo

1 Answer

Both Blinkers Blink when try to turn???

I own a 94 isuzu rodeo 3.2 v6 and I love it.... I have had no problems up until about 3 weeks ago.. When i activate my blinker both blinkers blink, outside and inside vehicle. I replaced my Blinker Control switch, which includes my cruise control... It fixed the issue for 1.5 days... And now I have the same problem all over again. when i use blinkers it's like using my hazard lights... I have no other problems other then the blinker issue... all fuzes are good. But other than the control switch and fuzes is there anything else it could be ??? thanks

Posted by on

  • Mikee May 11, 2010

    has any other wiring been done to the rodeo back three weeks ago?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have one of three problems :Condisation, weak ground or a frad wire in you collam

Posted on Jun 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a 1991 Isuzu rodeo 3.1L V6 and can't figure out or find the right fireing order can I help please


For the 1991 Isuzu Rodeo with the 3.1L V6:

Firing Order:
1-2-3-4-5-6
Cylinders:
....(back).....'.5...........6.'
'.3...........4.'
'.1...........2.'
....(front)
Distributor:
.....(back)
.................(+)-screw
..........4
..3
...................5
2
.................6
.........1
(+)-screw
.....(front)
Rotation: Clockwise

Jan 12, 2017 | Isuzu Cars & Trucks

1 Answer

How to fix high hc on 94 isuzu rodeo v6 3.2


Took me a couple of views to figure out what HC means.
You would need to know what the limit is for your area and what the exhaust is producing, then find out what the cause is.
It stands for unburned hydrocarbons which is supposed to be controlled by the O2 sensor among other things. Could be a sensor or the engine not getting up to normal temp.

Sep 06, 2012 | Isuzu Rodeo Cars & Trucks

2 Answers

The engine misses on 3 and 4 and compression leaking into radiat


If you do in fact have compression (air) blowing in to the cooling systems this would show either a blown head gasket, warped head or cracked head. Please od not run the Rodeo until repaired as if coolant is getting in to the cylinder or oil (Your oil will look like chocolate shake) it can do severe damage. What motor please 3.0 V6?
THanks,
Tom

Nov 08, 2009 | 1993 Isuzu Rodeo

1 Answer

Will a 1994 rodeo v6 fit in a 1997 v6 rodeo? Can you put a 1994 engine in a1997.( 94 vin#4S2CY58V5R4328169,)((97 vin#4S2CK58E4V4324657)


I dont think so, the 8th digit is the engine code and they are different. I'm glad you put the VIN numbers up, good thinking ; )

Oct 15, 2009 | 1994 Isuzu Rodeo

2 Answers

1995-96 Isuzu Rodeo transmission swapable?


No they are not compatible. They changed the crank between 95 and 96. I have a 96 that needed an engine swap and the dealer that I bought it from was paying for the engine, he bought a 95 engine and after a month of trying the mechanic said no way no how, the crank between the two is different.

Aug 20, 2009 | Isuzu Rodeo Cars & Trucks

1 Answer

Are there any other alternators compatible with a 94 Isuzu Rodeo such as an Isuzu Trooper or another make/model? If so up to what year?


On a v6 it must be off of a rodeo v6 only from 11-92 thru 11-95. If you get an aftermarket alt. get a beck arnley brand , others do not work. Try to get your rebuilt at a place that rebuilds alts. and starters locally.

Jul 18, 2009 | 1994 Isuzu Rodeo

1 Answer

I need torque specs for 94 rodeo


flywheel 80-90 foot lbs (new bolts 90), press plate 45 foot lbs

Feb 14, 2009 | 1995 Isuzu Rodeo

1 Answer

Blinkers not working


The buzzing sound is probably your relay. It is in your fuse panel and it is what controls how fast your blinkers flash. It is usually a round plastic thing in the fuse panel. and you replace it just as you would a fuse just pull the old one out and push the new one in

Dec 22, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1998 Isuzu Rodeo Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...