Question about 2000 Pontiac Grand Am GT

2 Answers

Don't have no turn signal

Can not use my turning switch don't work

Posted by on

  • Dar
    Dar May 11, 2010

    doesn't blink? doesn't do anything? Lights up on dash but doesn't blink?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Call a dealer. it is a recall in my 2000 grand am

Posted on Jun 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

Hi - Checked the fuse? Dirty connections? Indicator switch relay blown? Or replace as things do wear out. You could take off the steering shroud & see if there is a lose connection or broken parts or dust build up. Just a few ideas. Good luck

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 k1500 brake lights and turn signals don't


Do you have power going into the turn signal switch from the brake switch, and then coming out to go to the lights ?

Jun 23, 2013 | Cars & Trucks

1 Answer

Signal lights not working


Are you getting power in and out of the turn signal switch ?

May 16, 2013 | 2004 Ford Expedition

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

1990 dodge truck turn signals don't work. 4 way flashers work


There should be a fuse for the turn signals. The hazard flashers are on a different circuit not controlled by the key switch.

Jul 13, 2012 | 2000 Oldsmobile Alero

1 Answer

How do i fix my blinkers on my 1971 f100 ford ?


There is a flasher unit for the turn signals, separate from the hazard flasher, that is under the dash. If the fuse for the turns is good, and you already know the bulbs are good since the hazards work, then you may have a bad turn signal switch.
When you use the turn switch, do the bulbs come on and stay on, or nothing? If they come on and don't blink, then it's probably a bad turn flasher unit. If they don't come on at all, suspect a bad turn signal switch. But first check the fuses, then pull off the connector to the turn switch and see if you have one hot wire there, with key on. That one hot wire will be from the fuse.

Mar 01, 2012 | Cars & Trucks

1 Answer

Hazards work but turn signals don't


I'd check your multi-function switch (on your steering column, what you touch to turn your turn signals on). There is a small metal clip on the base of it that tells your car to turn the turn signals on (right or left). Also trace the wires from the mulit-function switch to your turn signal relay and see if you're getting power when the switch is activated.

Jan 17, 2012 | 1996 Ford Thunderbird LX

1 Answer

Turn signals work but they don't return, how do I fix?


there's a little plastic piece inside the turn switch called a cancelling cam that broke or quit working. The only fix to get switch to return is replacing the turn signal switch. I don't think you can buy the part separately.

Dec 06, 2011 | Cars & Trucks

1 Answer

1999 Lincoln Continental was in for repairs and now my turn signals and break lights dont work. Im being told it's something to do with the anti theft system because the battery was unhooked. The...


I suspect there is a problem with the turn signal/ hazard switch. turn the turn signal on left or right, if it doesn't flash, grip the hazard button and gently wiggle it around, if the signals start flashing, replace the turn signal switch. The Brake lights are wired through the turn signal switch, if the 3rd brake light works, the brake switch is OK. I don't think it has anything to do with the anti theft system (at this time)

Sep 21, 2011 | 1999 Lincoln Continental

1 Answer

My turn signals don't work but my hazards are fine


try pushing, pulling, tugging on hazard switch button when turn signal is on, left or right, if they start blinking, the turn signal switch is bad.

Sep 14, 2011 | 1998 Ford Explorer

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...