Question about 1997 Honda Civic

2 Answers

My car cranks but dont start

My car cranks but it don't start i have a brand new battery, bran new fuses, sparks plugs....ck the relay the computer...and it still dnt want to start....see this is what happen my car needed a jump and this guy came and gave me a jump but he put the cable wires back wards and all my fuses blew..so i change my fuses and my batter and i thought i was my kill switch and i took that off....and it sill dnt want to start..so i have no idea what it can me....see im a girl and i dont know what els it could be...

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 293 Answers

Wrong polarity of source battery when " jump starting " will not cause all of your fuses to blew up.A fuse will only blew if the downstream load draws a lot of current or was shorted. Any upstream fault will not cause it to blew. Wrong polarity though can cause internal damage to the computer. It can fry the ICs and blew the capacitors. Have your computer (ECM) checked again.

Posted on Jun 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

You need to make sure its gettin spark and fuel and compression start from thare also plug a scan tool into it so see if all the sensors are working possibley ecu could be fried

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Crown vic 2005 no start replaced fuel pump


check your crankshaft position sensor. fuel+spark+compression+timing=ignition.

Mar 13, 2014 | Cars & Trucks

1 Answer

Spark plug blew out now car wont start


sounds like the autoshutoff relay may be bad..it controls the ingition and the fuel pump too..if the pump works check for spark by inserting a screwdriver into a pulled off spark plug wire and look for a decent spark between the screwdriver shaft and any ground like the block..if no spark the relay may not be powering up the ignition system..

Dec 15, 2013 | Acura RSX Cars & Trucks

1 Answer

Car cranks but does not start


The PGM relay is in the fuse box near the engine battery.

Jul 06, 2013 | Cars & Trucks

1 Answer

New alternator and battery installed still will not start


Not much to go on. Try replacing the start relay with another one in the fuse box. Thats if it won't crank. If it cranks need to see if you are getting fuel look down the TB carburetor looking thing on top of engine with key on and someone cranking engine. Put one of those testers in line with the spark plug wire it has a light inside that flashes when the engine fires. Or you could disconnect sparkplug end and hold on but it will knock you on your *** and could KILL you so don't do it

Dec 03, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Gets gas gets spark but don't start. new fuel


1. does it turn over? if so, strong, or weak? 2. did you replace the fuel filter? 3. coil packs, or distributor (pack(s) can be tested) if distributed check cap and rotor, replace coil, but first check starter relay - 4. Check all ignition fuses, starter fuse - (along with relay{above}) 5. Check all connections from battery - positive, negative etc.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

May 26, 2011 | 1997 Dodge Dakota

1 Answer

I have a 1998 ford wind star new fule pump but still not geting fule , wont crank engine turns ove but won;t start


INSTALL PRESSURE GUAGE THEN CK, VOLTAGE TO PUMP PCM TURNS ON PUMP RELAY FOR 2 SECONDS WHEN KEY CYCLED ON ,, IF NO POWER CK INERTIA SWITCH ( MAY BE TRIPPED ) IF NO POWER TO INERTIA SWITCH CK FUEL PUMP RELAY IF NO VOLTAGE AT PUMP RELAY THEN CHECK FOR SPARK AT PLUGS IF NO SPARK CK PCM POWER RELAY IT SUPPLIES VOLTAGE TO PCM THAT INTURN POWERS FUEL PUMP RELAY

HOPE THIS HELPS

Aug 08, 2010 | 1998 Ford Windstar

2 Answers

Won't crank.No sound from starter.Starter tested ok. Battery new.Dash lights light up.Fuses not blown. 1992 Toyota Camry XLE V6 automatic


Battery cables off the starter ,starter relay and ignition switch. these are the remaining items in the starting system for no crank and no start.
Get Shop manual and do the appropriate testing for each.

Feb 19, 2010 | 1992 Toyota Camry V6

Not finding what you are looking for?
1997 Honda Civic Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...