Question about 2000 Dodge Intrepid

1 Answer

My 2000 dodge intrepid will not start, just goes around and around.

The water pump in my 2000 Intrepid blew. It was replaced along with timing chaing. Crank shaft will not turn a full 360 now. It stops about half way. Could this be a cam and crank sensor problem as well ? Its a 2.7

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    Are you sure the chain & cam are timed properly?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 412 Answers

YOU MOST LIKE HAVE VALVES CONTACTING PISTONS AND NOT ALLOWING ENGINE ROTATION..A 2.7 ENGINE IS AN INTERFERENCE ENGINE AND IF GOES OUT OF TIME WILL DAMAGE VALVES AND/OR PISTONS

Posted on Jun 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 intrepid stalls and chugs


Is the check engine light on? Could be anything from bad fule filter to bad pump to injectors along with a Bad ECM leaking intake, bad spark plugs or wires just to start. Really need more info than this to diagnose the issue

Sep 28, 2011 | 2000 Dodge Intrepid

1 Answer

Need to change timing chain on 2000 Dodge Intrepid 2.7 l. While I do that what else should I change? oil pump, water pump, etc..


These usually have timing belts, if the water pump isn't making nose, leaking or dragging, put it back on. If it does have a timing chain in it, put new timing gears and guides in it as well, easier to do while you already have it apart. Check your power steering pump to make sure it is not leaking or the bearing isn't dragging, if so replace. Replace the thermostat while you have it apart. Check all hoses and belts to see if they need to be replaced while your at it, you will have most of them off anyway. Definitely check the serpentine belt that runs everything on the front of the motor, if it is cracked or worn, replace. Better to do it now rather than along the side of the road. Hope this helps you.

Aug 24, 2011 | 1999 Dodge Intrepid

1 Answer

What is the timing diagram for a 2000 dodge intrepid 2.7 litre engine


Trying to time this 2000 intrepid 3.5L after puting water pump in i line the timeing mark But when i put the tensioner back on it throws the mark off

Jun 15, 2010 | 2000 Dodge Intrepid

1 Answer

Dodge Intrepid 1996 Water Pump Replacement Needs


a timing belt. the water pump uses it to turn it and you got to take it off to change the pump anyway so you might as well get a new one.also the hydralic timing belt tensioner should be replaced at the same time just to be sure.you will need anti freeze of course as well

Apr 05, 2010 | 1996 Dodge Intrepid

1 Answer

How to adjust timing for 94 dodge intrepid


1st the belt must ALWAYS be replaced when the water pump is done or anytime the belt is distrubed, here are the only instructions I could find on the belt replacement.
http://www.allpar.com/fix/timingbelt35.html

Jun 18, 2009 | 1994 Dodge Intrepid

1 Answer

Need Diagram of water pump on a 1998 Dodge Intrepid 2.7,


the water pump is timing chain driven and to replace it requires serious disassembly of the engine. it is a 13 + hour job and is not for the casual mechanic

Apr 13, 2009 | 1998 Dodge Intrepid

3 Answers

A slight delay in starting engine on 2000 dodge intrepid 2.7 eng


this car requires around 30 minutes on the battery disconnect, if you the horn honks on reconnection you have reach the default setting

Mar 22, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

549 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...