Question about 1989 Mazda B-Series

1 Answer

Rebuild starter or get one remanufactured?

Should I rebuild my 1989 b2600i 4wd starter myself or should I get a remanufactured one? Funds are very low. I always do my truck repairs, oil,tires,etc. I just have never ever rebuilt any kind of starter. Thanks TODD

Posted by on

  • yadayada
    yadayada May 11, 2010

    first what is wrong with the starter? hard to say until i know that. There is no such thing as a "kit" u buy the individual parts.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 35 Answers

Http://www.autopartsworld.com/mazda_parts/b2200/startermotor/1989.html $62 with $22 core
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Starter&itemId=prod61198&isSearchByPartNumber=&sortType=null&totalPages=[I@172fe06&currentPage=1&vehicleNValue=&navValue=16400045&parentId=cat30072&fromString=&fromWhere=null&filterByKeyWord=&categoryNValue=&categoryDisplayName=Starting+%26+Charging&_requestid=845319 <autozone both are pretty inexpensive.most likely bendix is bad more trouble than its worth to open one up....

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i rebuild a starter and alternator?


your first question should be , where do i find the tools to rebuild a starter & alternator ? most just buy rebuilt or remanufactured starters & alternators .

Feb 03, 2015 | Cars & Trucks

1 Answer

1989 Chevy Cavalier Station Wagon won't start


I have one myself and I know these car eats through starters. I have been through three myself

Jan 17, 2013 | 1989 Chevrolet Cavalier

1 Answer

Can i repair my nissan sunny gti starter motor


Yes there is some sites thay you can order the individual parts from buy sometimes it is easier to buy a remanufactured one from your local auto store because if your not familiar with rebuilding it you will be lost

May 05, 2012 | Nissan Sunny Cars & Trucks

1 Answer

I have a fx4 f 150 that is a 04 that in cool morinings will not turn over but when warms up cranks fine what could it be


Sounds like the starter, try tapping on the starter with a hammer while trying to start it, If it starts its the starter. Also, if there is a place near by that rebuilds starters its alot cheaper than buying a new one. They put new parts in so its as good as a remanufactured one from the parts store.

Sep 11, 2011 | 2004 Ford F150

1 Answer

I have a miss in my 1989 B2600I and i was loking for a diagram of the pugs and wires


astrids-gallerie.karmafish.net/main.php?g2_view=comment...
find plug and wiring diagram at this site

Oct 21, 2009 | 1989 Mazda B-Series

1 Answer

Radiator fan doesn't kick on when idling in traffic. Temp is 220


This happened to me. One of the brushes on the motor was worn down till it didn't touch the commutator. I bought a new brush from a starter rebuilding shop and soldered the wire myself. It works fine now. You need a brush from an automotive shop because at 12 volts, it draws a lot of current. So the brush has copper. A graphite brush from another motor shop wouldn't work.

Oct 11, 2009 | 1989 Buick Skyhawk

2 Answers

I'd like to know how to replace toyota starter


usually mounted on the driver side or passenger side through the motor and possible a plate into the transmission. remove the negative terminal from the battery and set aside so it doesn't touch the negative post, climb under the truck, remove the starter and power and signal leads, replace with new or quality remanufactured, installation is reverse procedure of removal

Oct 08, 2009 | 2001 Toyota Tundra

1 Answer

My 1989 Toyota Van LE 4wd started squeaking when I turn left


Actually this sounds more like your left tire is rubbing against the tire well, this was relatively common amongst these models, as I have one myself that did that while turning right, I solved it by hammering out the dent that was in the well. Hope this helped GL!

May 12, 2009 | 1989 Toyota Pickup SR5

1 Answer

I cant get my starter to work and i was wondering if i need shims for my new starter on my 89 gmc 1500


most times if you are installing a remanufactured
starter the proper shims would come in the box.
it's hard to tell what is going on from your discription.starter does not start ? does it make any noises, clicking sounds or anything ?

Mar 29, 2009 | 1989 GMC C1500

1 Answer

1989 Mazda B2600i pickup overheats. Replaced


you just said it you need a new fan clutch

Mar 20, 2009 | 1988 Mazda B2600 Cab Plus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...