Question about 1999 Chrysler 300M

1 Answer

The car cranks but won't start

1999 CHrysler 300 M cranks but won't start Chrysler 300 m it well crank over but wont start. Allrady changed the cam sensor.

Posted by on

  • 2 more comments 
  • Anonymous Mar 22, 2014

    car doesn't want to turn on

  • Anonymous Mar 22, 2014

    the car doesn't want to turn on the dashboard lights all come on but the car doesn't want to start up engine wont turn on

  • Anonymous Mar 23, 2014

    have 5volts signal to crk an cmp. and ground backprobbed computer all signal an power.. will not start unless cam unplugged.

  • Anonymous Mar 24, 2014

    Car spins but wont start

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Ok, check the following below--

1. Check the Ignition control Module for its operational value. it may be damaged.

2. Check the coils.
3. Check the plugs and wires.
4. Check the ECM/PCM/ECU(All represent the same device that is commonly known as the engine control computer)

Check these areas thoroughly for faults. I would also advise to replace the fuel filter and fuel pump as well.

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrystler 1999 300 m codes p1684 p0340 p1685 mean


P1684 CHRYSLER - Battery Power To Module Disconnected
https://www.autocodes.com/p1684_chrysler.html

P0340 CHRYSLER - Camshaft Position Sensor Circuit Bank 1 Sensor 1
https://www.autocodes.com/p0340_chrysler.html

P1685 CHRYSLER - Invalid SKIM Key https://www.autocodes.com/p1685_chrysler.html

Jan 08, 2017 | 1999 Chrysler 300M

1 Answer

1994 Chrysler lhs cranks over but wont start. Acts like it wants to start but wont. ive got no voltage going to crank sensor no voltage to coil pks no voltage to cam sensor and fuel pump not runnning


Sounds like a bad pcm to me. Both the crank and cam sensors should have nearly 8 volts on the orange wire to them, with key in on. That is the 8 volt reference signal to them, and it comes from the pcm at connector pin #7.

Aug 05, 2015 | Chrysler Cars & Trucks

1 Answer

CHRYSLER 300 M V6 1999 WAT THE OPERATIONS FOR CHANGING THE DISTRIBUTION PLEASE


distributor? the 300M does not have a distributor. Only timeing is with the computer, the cam sensor, the crank sensor and other sensors that manage the system.

Jun 02, 2011 | 1999 Chrysler 300M

1 Answer

Chrysler 300m 2001 starts after unplugging cam sensor


theres a reflash program that needs to be done on these cars, because of extended crank time and cam / crank syhcronizing out, start there,also i had one with same code and found that aftermarket cam sensors dont work, installed dealer part and had the updated reflashing done and solved the problem.

Jan 06, 2010 | 1999 Chrysler 300M

2 Answers

Chrysler wont start


I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY

Jul 02, 2009 | 1994 Chrysler Concorde

2 Answers

The car cranks but won't start


The crank sensor or Timing belt are two common problems with this car that can cause this. Goodluck

Apr 27, 2009 | 1999 Chrysler 300M

2 Answers

2001 chrysler voyager no spark wont start


. Make sure that the distributor rotor is moving when it cranks. check the cap and rotor for cranks. If all is well then change your module inside your distributor.

Mar 25, 2009 | 2001 Chrysler Voyager

2 Answers

1999 Chrysler 300 cranks but won't fire


i had this problem also new crankshaft position sensor will cure it (guarantee it)

Mar 16, 2009 | 1999 Chrysler 300M

Not finding what you are looking for?
1999 Chrysler 300M Logo

798 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...